P300 -> P1400 ( +100 )

P1500 -> P2400

Is it right for the test?

; 0.2mm layer, 8 bands 5mm each, total height 40mm
{if layer_num== 1}M572 D0 S0.06
{elsif layer_num== 25}M204 P300
{elsif layer_num== 50}M204 P400
{elsif layer_num== 75}M204 P500
{elsif layer_num== 100}M204 P600
{elsif layer_num== 125}M204 P700
{elsif layer_num== 150}M204 P800
{elsif layer_num== 175}M204 P900
{elsif layer_num== 200}M204 P1000
{elsif layer_num== 225}M204 P1200
{elsif layer_num== 250}M204 P1400
{endif}

Thanks, I'm going to check out some script.

If I understand correctly M201 xy600 and M566 xy600

That's exactly what I was looking at, but I don't know what the appropriate settings are for my engines and printer.

Hi,
I have a problem tuning my printer. This is a Hypercube Evolution with 17 hs4401 engines. Settings here. Hotend is E3D V6 with BMG.
Thank you for the advice.

config.g Config file