Posts made by RASA

@phaedrux
Hi, thanks for the quick reply !
No, rather not. On boards with jumpered drives I took out the drives and connected the external drives there. On some other boards with soldered drives there are jumpers, where you can get the signals. In the schematics of the duet 3 I only found test points for these signals.

Hi

How do I connect external stepper drives to the duet 3 6HC ? I don't see any jumper pins on the board. How many external drives can I connect directly to the board ?
The add on boards seem to have a lower step frequency.
Is there a dedicated pin to invoke a homing routine on an external drive ? and another for the reply ?

Thanks

Harald