I’m taking the height as a parameter in the ‘PanelDue firmware’ section. However, when I do this, the text inside the button is not centered properly. I couldn’t resolve this.
Latest posts made by remzirecep
-
RE: PanelDue Firmware
-
PanelDue Firmware
When I adjust the button height on PanelDue, the button text doesn’t center properly. Is there anyone who could help with this?
-
The micro-USB port on my PanelDue screen is broken
Hello,
I would like to upload firmware to my PanelDue display using Bossa, but the micro-USB port is broken. I couldn’t find any other way to connect it. Is it possible to upload the firmware using a different method? Could you please help me?
-
RE: Duet 3 6HC + Raspberry Pi 4 Not Connecting
@droftarts I solved my issue, thank you.
-
RE: Duet 3 6HC + Raspberry Pi 4 Not Connecting
@jay_s_uk I downloaded the Duet3Firmware_MB6HC.bin file from the "3.5.3 Release Candidate 1" section on this link: https://github.com/Duet3D/RepRapFirmware/releases. Then, I shorted the "erase" jumper on the board. After waiting for a few seconds, I removed the jumper and pressed the reset button. I used "Bossa" to flash the firmware I downloaded from the link mentioned above. After flashing, I clicked "Verify" and it was successful, but the LED is still constantly lit. What should I do next? If what I’ve done is not correct, what is the correct process? Is there anything I’ve missed or something I haven’t done?
-
RE: Duet 3 6HC + Raspberry Pi 4 Not Connecting
@jay_s_uk It stays dimly lit all the time.
-
RE: Duet 3 6HC + Raspberry Pi 4 Not Connecting
@jay_s_uk After applying the steps here, is the LED supposed to turn off? When I follow the steps and then plug in the Ethernet cable, my computer doesn’t detect the board’s port. Can you help me with this?
-
RE: Duet 3 6HC + Raspberry Pi 4 Not Connecting
@jay_s_uk The status LED is dimly lit.
-
RE: Duet 3 6HC + Raspberry Pi 4 Not Connecting
@jay_s_uk I applied the settings from the link you provided. In PuTTY, I’m getting the outputs shown in the attachment. Is this normal? When I typed M552, it didn’t return an IP address.
-
RE: Duet 3 6HC + Raspberry Pi 4 Not Connecting
@jay_s_uk If you can show me how to do it using PuTTY, I can try that as well.