@phaedrux im not with the machine today but i can send that in the morning.
Ive checked all the homing files for anything that messes with the axes and nothing, ill post those tomorrow aswell. (I wanted to get this issue ironed out before i attempted splitting the x axis to auto square it in the homing routines)
Im sure it is in cnc mode as the G0 will work fine on x axis and i suppose does work to a point on the y axis albeit at a limited rapid of 6000mm/min. A G1 move with f defined yields the same results
I can send m203 in the console and it will return all axes have 20000 mm/min max speeds so nothing seems to be changing the defined max but even if the next command sent is G0 Y1500 the requested and top speed is reported are 6000 mm/min, but the same move in X shows both as 19999 mm/min
