+1 for this feature, but only if it will not affect print performance.
Also it's possible to write counters in log (filament length printed, total hours of print time and so on).
edit: g-code commands to write something into logfile or to redirect next command output into logfile also would be helpful.
Hello, is it possible to flip the X axis of a delta printer using the config without reconnecting the steppers and endstops? The print is mirrored and the things that should be on the right are printed on the left.
What would be the easiest bit of gcode to enter that includes a little carriage movement?
[[language]]
M83
G1 Z0.1 E100
I am only moving the extruder, there's no x/y/z movement.
As far as I remember you have to move other axes too.
Upd:
Nonlinear extrusion is not applied to extruder-only movements such as retractions and filament loading.
deckingman, thank you. I'll try pressure advance again.
Can anyone post pictures? Before/after pressure advance enabled?
My other (related) suggestion is an option for a single G30 probe command to probe multiple points and average them..
The new is a well-forgotten old.
+1 for this feature. The same problems with IR sensor forced me to stop using it.
Yes, I need to remove the "Stable" folders
By the way, this was useful for those who know about [c]git pull[/c] command. I'm one of those who used this command - just two words to get latest available firmware, readmes and source code together. But I agree that releases page is more appropriate place for binary files.
Oh… thank you again. I thought that latest version is available here: https://github.com/dc42/RepRapFirmware/tree/dev/Release/Duet-WiFi/Stable
I did not think of looking at the releases page at github at https://github.com/dc42/RepRapFirmware/releases
I will try to downgrade back to 1.19.2.