Topics created by roig12

@droftarts I see, so it's not the thermistor as I measured it and it's 100K.
I guess I will check where the wires were damaged and fix the open circuit since I touched both ends of the wires together and nothing changes.

Thank alot!

@oliof Thanks alot!

Thanks guys!
Actually lowering made it worse so I raised it and found the sweet spot at Q7000 which lets me go down to 20% power while under that it shuts off which is perfect for my needs!

Appreciate the help!

@o_lampe little late, but yeah, Mirror mode does print a copy mirrored, it also eliminates inertia just on the axis the IDEX is set up.(either X or Y)