Topics created by sg2020

@phaedrux oh that's funny. I'm going to try that.

@phaedrux
Changing the X2 Y2 to X1 Y1 seems to have done the trick.

I setup the grid from fcwilt's advice.

Thanks everybody. I really appreciate it. For some reason going to RRF 2.1 to RRF 3.2.2 really confused me so thank you all for helping me get back up and running.

@sg2020 said in looking for an example of rrf3.2.2 corexy with bltouch config:

That makes sense to move G29 S1 to the end of the config.g file. Done.

No that's just as bad. You don't want to load the mesh until after you've homed the printer. So either at the end of homeall, or in your slicer start gcode after any G28.