Topics created by SLKittie

I assumed so, but better for clarification.
Thank you so much for the time and help.

@slkittie said in Micro USB OTG to USB Camera:

USB connection to use Webcam

you can take +5v and GND from board and solder it to separate USB plug

0_1553716114226_1ddcfba7-4059-441e-97c2-babb673a2356-изображение.png

@wilriker No didn't change the lead screw. but once i got stuff working. I did a re-calibration of all axis's.
Need a bit more fine tuning but 20 mm print was 20.23mm so cant complain lol.

@JoergS5 eventually I will be using one stepper, doing that. Yeah i didn't know about the spindles being off but that does make sense. I will take that into account and grab a long spindle to cut in half, well that's if i don't come across anything else to use for the z axis. (hyper-cube set up)