Topics created by Sowlan

I have fond where is issue but dont understand what it appear now.

When I worked to my tpost0.g at begin of configuration of my tool changer I needed to add M564 S0 for allow my printer arm to catch tool0 outside of limits of my bed to make some thing more clean I had added M564 S1 to activate again limits, after that when I tried to printing one problem is appear where my DC42 IR prob dont allow me to printing correctly because the offset not be able to going more dow the the IR prob zone detection, in this case I had removed M564 S1 at end of my tpost0.g and all worked find.

Now to resolve my issue I had added again M564 S1 at end of my tpost0.g, but I had also added M564 S0 at end of homeall.g and now it's work like a charm. But what the problem coming today I dont know

So, about offset issue I have found where is problem, in my tpost0.g I added at end M564 S1 to enable switch limit because at begin of the script I added M564 S0 to disable limit switch for catch my tool who is outside of the limits of my bed. If you have subjection to catch my tool outside of limits of my bed more properly I take it.

I tried one more time to catch tool with G91 before G53 G0 X132 Y277 F7000 but arm continue to go to X285 Y277. My adjustment with G9 after G53 G0 X132 Y277 F7000 work well but I would like understand why it does it, If I have another issue I'll never sure it isn't linked with it, it's what is arrive with my nozzel offset juste now, but it's look like bug.

@dc42
Finally I have small difference but not significant difference...

With metal plate, cold bed and paper aluminum border exceed
Capture d’écran 2020-01-20 à 14.11.11.png
Capture d’écran 2020-01-20 à 14.11.24.png

With metal plate, hot bed at 60°C and paper aluminum border exceed
Capture d’écran 2020-01-20 à 15.51.01.png
Capture d’écran 2020-01-20 à 15.50.54.png