Topics created by Stealthy_TT

@stealthy_tt said in Pwm fan stopped working during print/after:

@dc42

Yeah I usually use H-1, but at the time was trying different things to get my part cooling fan going again.

Do you know what part of the board went bad for Fan1? I know it has some power but it’s definitely not 12v.

It will be the Fan1 mosfet, see https://duet3d.dozuki.com/Wiki/Connector_and_spare_part_numbers.

So just an update. for some reason cura was giving me really crap prints. I downloaded Slic3r and configured it, and man my first print from it was pretty flawless. Seems like Slic3r slices better than Cura. The one thing I hated about cura was that it would travel to the next layer then lift z to start printing, Slic3r does the opposite and lifts head then moves.

Yeah I could use Z hop on Cura, but that always gave me a poorer print.

Will post a picture of the difference0_1524604892005_1E4FE3B0-6284-457A-96C5-C61D36EDAA57.jpeg 1_1524604892006_8829D302-24E2-4643-BB1F-4A9BE5A990C4.jpeg

Far right is a Slic3r print, the two on left are from Cura, all pictures printed with .2 layer height.

@dc42 haha Thanks I knew it had to be something like that.