@TBN3DMaker said in IDEX - Z not matching when using T0 and T1 on the same layer:
@CR3D nop.. to me it seems like it random.. not every time.. but most of the time.. the past days i have used the printer to print only with T0 ,
currently have other and more serious problems to think about, the controller keeps reseting it self mid prints..
@TBN3DMaker said in IDEX - Z not matching when using T0 and T1 on the same layer:
@CR3D nop.. to me it seems like it random.. not every time.. but most of the time.. the past days i have used the printer to print only with T0 ,
currently have other and more serious problems to think about, the controller keeps reseting it self mid prints..
@Havoc340 said in IDEX - Z not matching when using T0 and T1 on the same layer:
I am also having a similar issue on the duet2 and rrf 2.05
Layer one is perfect on tool0, but tool1 is too high. Changing my G10 Z offset for the second tool has no effect on the first layer, but it will be accounted for in subsequent layers.
Been on my list of things to try, just downgraded to 2.05.1
I have not previously seen this issue, and just did a test print similar to the original picture, and do not see this issue.
All three of you, can you post your config.g (if you haven't already), the GCODE file of the model that was printed, which slicer you are using, and additional pictures? Can you try print two models/towers, each printed with only one of the tools? Like so:
e7bdcbc2-e6a1-4956-a368-83844d85e45b-image.png
