Best posts made by TLeTourneau

Found it! I had the Z probe pins crossed at one of the interconnects, just goes to show that I shouldn't wire things late at night. I have multiple JST connections at each end so I can quickly and easily swap probes if I want to as I have an inductive, mini IR, and BLTouch. Too many connections and color changes when I'm tired...

Thanks for the feedback, it really helped!

Place " ``` " before and after the text.

Test

Well the plate and heater are installed, now to run a mesh and see what it looks like. Here are some pictures.

Here's the cast aluminum plate:

Here is a view of the frame I made to mount the plate:

Here is the front with the plate on the mount:

Here is a closer look at the front mount:

Here is the rear left mount:

And the rear right mount:

I also installed linear rails on the X and Y axis's:

I just thought I'd share.

@taconite said in Yet another cast aluminum plate topic...:

Is there a possibility to set max bed temperature?

It should be in your config.g file already, it'll be under ; Heaters and look something like this:

M143 H0 S120                                       ; Set temperature limit for heater 0 to 120C
M143 H1 S280                                       ; Set temperature limit for heater 1 to 280C

H0 is my bed heater and H1 is my hot end.

I also use a 184C thermal fuse for redundancy.