Topics created by Viald

Hello. Sorry for my silence.
I have broken my glass bed. Waiting for the new one to do new tests.
And the new one will be this bed https://flex3drive.com/product/printbite/?attribute_size=Ø+250mm&attribute_colour=Clear&attribute_graphic=Plain&attribute_texture=Matt

@nhof said in Noise from motors:

When you say 'recalibrated aluminum frame' what do you mean?

If you changed the way parts are connected or tightened them, the frame could be resonating differently than before which could cause more audible noise.

You're fully right ! It was a resonating issue. I disassembled and assembled again all parts of the 3D printer, and the silence is back 🙂

Thank you.

@dc42 I think so
I have checked again probing height at X0 Y0
I have set the FSR board at the max sensitivity level which is 0.95V, by default the level is 0.92V

09:19:32M98 P"0:/macros/Calibration/Z0 Delta" Stopped at height -0.024 mm 09:19:26M98 P"0:/macros/Calibration/Z0 Delta" Stopped at height -0.024 mm 09:19:20M98 P"0:/macros/Calibration/Z0 Delta" Stopped at height -0.024 mm 09:19:15M98 P"0:/macros/Calibration/Z0 Delta" Stopped at height -0.029 mm 09:19:09M98 P"0:/macros/Calibration/Z0 Delta" Stopped at height -0.024 mm 09:18:59M98 P"0:/macros/Calibration/Z0 Delta" Stopped at height -0.024 mm 09:18:40M98 P"0:/macros/Calibration/Z0 Delta" Stopped at height -0.044 mm

It's even better -0.024 🙂

I noticed that each time I did this test, the first measure (-0.044) is always lower than the others. This is why when I probe the bed, I did it several times (M558 P5 X0 Y0 Z0 H1.5 I1 T15000 F50 A5 S0.01)

@viald said in Delta calibration failed:

When I print the calibration tool. Angles between Y/X and Y/Z are almost perfect. But the distance are still wrong. X 49.86 Y 50.50 Z 50.23

Small errors in scaling can be corrected using the M579 command.