Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Pay for config / json files for my corexy printer build.

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    11
    67
    5.7k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • deckingmanundefined
      deckingman @A Former User
      last edited by

      @bearer said in Pay for config / json files for my corexy printer build.:

      Should probably switch joke supplier;)

      Yes, a joke never works when you have to explain it...........

      Ian
      https://somei3deas.wordpress.com/
      https://www.youtube.com/@deckingman

      1 Reply Last reply Reply Quote 0
      • Vetiundefined
        Veti
        last edited by

        that went straight over my head.

        1 Reply Last reply Reply Quote 0
        • Stevoundefined
          Stevo
          last edited by

          This be the "Road runner" lol

          Finished it last year enjoyed nearly every minute of the build lol

          0_1562185279505_IMG_0101.JPG

          1 Reply Last reply Reply Quote 1
          • Stevoundefined
            Stevo @Veti
            last edited by

            @veti as follows.....

            0_1562185760975_IMG_1670 copy 2.jpg

            1 Reply Last reply Reply Quote 0
            • Stevoundefined
              Stevo
              last edited by

              Evening,
              If I wanted to home y axis first prior to the x due to how i plan to locate the x and y endstops have I made suitable alterations to the home all file to do this ?
              Be gentle lol

              ; homeall.g
              ; called to home all axes
              ;
              ; generated by RepRapFirmware Configuration Tool v2 on Wed Jun 26 2019 19:39:28 GMT+0100 (BST)
              G91 ; relative positioning
              G1 Z15 F6000 S2 ; lift Z relative to current position
              G1 S1 Y445 F1800 ; move quickly to Y endstop and stop there (first pass)
              G1 S1 X445 F1800 ; move quickly to X endstop and stop there (first pass)
              G1 X-5 Y-5 F6000 ; go back a few mm
              G1 S1 X445 F360 ; move slowly to X axis endstop once more (second pass)
              G1 S1 Y445 ; then move slowly to Y axis endstop
              G90 ; absolute positioning
              G1 X188 Y-222 F6000 ; go to first bed probe point and home Z
              G30 ; home Z by probing the bed

              1 Reply Last reply Reply Quote 0
              • Phaedruxundefined
                Phaedrux Moderator
                last edited by

                Yes that looks correct.

                Z-Bot CoreXY Build | Thingiverse Profile

                Stevoundefined 1 Reply Last reply Reply Quote 0
                • Stevoundefined
                  Stevo @Phaedrux
                  last edited by

                  @phaedrux should I swap around the x and “move slowly” commands ? Towards the end of the file

                  1 Reply Last reply Reply Quote 0
                  • Phaedruxundefined
                    Phaedrux Moderator
                    last edited by

                    That will depend if the end stops will still be lined up or not. If you need to get Y homed first to line up X, is the switch contact area large enough to trigger 5mm away? If it's still going to miss, you can switch the order of the second X and Y moves so that it moves Y first.

                    You can copy and paste each line of the macro into the gcode console to execute it one at a time for testing to make sure it actually works.

                    Z-Bot CoreXY Build | Thingiverse Profile

                    Stevoundefined 1 Reply Last reply Reply Quote 0
                    • Stevoundefined
                      Stevo @Phaedrux
                      last edited by

                      @phaedrux thank you very much like that

                      1 Reply Last reply Reply Quote 0
                      • DanLundefined
                        DanL
                        last edited by

                        @stevo said in Pay for config / json files for my corexy printer build.:

                        ; generated by RepRapFirmware Configuration Tool v2 on Wed Jun 26 2019 19:39:28 GMT+0100 (BST)
                        G1 R1 X0 Y0 Z5 F6000 ; go to 5mm above position of the last print move
                        G1 R1 X0 Y0 ; go back to the last print move
                        M83 ; relative extruder moves
                        G1 E10 F3600 ; extrude 10mm of filament

                        More of a question than a suggestion....
                        Theway I read the above is that 10mm of filament will be deposited on top of the last print position. Shouldn't the extrude filament command be first...as a priming step....then move the extruder to the last position to start printing again?
                        This is a really helpful thread...thanks!

                        DanL

                        1 Reply Last reply Reply Quote 0
                        • Stevoundefined
                          Stevo
                          last edited by Stevo

                          Evening,

                          I have done the final wire up and fitted the BLTouch and both X and Y limits.

                          Been editing the files to get me to where I am as follows,

                          When I turn on the printer the BL touch deploys and retracts twice and then lights up red self test ?
                          I can then hit the home all and the y axis will home firstly then followed by the x axis homing after this has completed the print head moves to the centre of the printbed which then starts to rise but the probe does nothing in regards to the homing of the z axis.

                          I realise I have not put the offsets in for the BLTouch just wanted to get an understanding of how the z homing should work.

                          Have wired BLTouch as per be true 3d link

                          Would appreciate a pointer please.

                          ; Configuration file for Duet WiFi (firmware version 1.21)
                          ; executed by the firmware on start-up
                          ;
                          ; generated by RepRapFirmware Configuration Tool v2 on Tue Jul 23 2019 21:10:42 GMT+0100 (BST)

                          ; General preferences
                          G90 ; Send absolute coordinates...
                          M83 ; ...but relative extruder moves

                          M669 K1 ; Select CoreXY mode

                          ; Network
                          M550 P"WILE E COYOTE" ; Set machine name
                          M552 S1 ; Enable network
                          ;*** Access point is configured manually via M587
                          M586 P0 S1 ; Enable HTTP
                          M586 P1 S0 ; Disable FTP
                          M586 P2 S0 ; Disable Telnet

                          ; Drives
                          M569 P0 S1 ; Physical drive 0 goes forwards
                          M569 P1 S1 ; Physical drive 1 goes forwards
                          M569 P2 S0 ; Physical drive 2 goes backwards
                          M569 P3 S1 ; Physical drive 3 goes forwards
                          M350 X16 Y16 Z16 E16 I1 ; Configure microstepping with interpolation
                          M92 X80.00 Y80.00 Z1600.00 E420.00 ; Set steps per mm
                          M566 X900.00 Y900.00 Z30.00 E2400 ; Set maximum instantaneous speed changes (mm/min)
                          M203 X6000.00 Y6000.00 Z144.00 E1200.00 ; Set maximum speeds (mm/min)
                          M201 X500.00 Y500.00 Z20.00 E250.00 ; Set accelerations (mm/s^2)
                          M906 X800.00 Y800.00 Z2000.00 E800.00 I30 ; Set motor currents (mA) and motor idle factor in per cent
                          M84 S30 ; Set idle timeout

                          ; Axis Limits
                          M208 X-220 Y-220 Z0 S1 ; Set axis minima
                          M208 X220 Y220 Z660 S0 ; Set axis maxima

                          ; Endstops
                          M574 X1 Y1 S0 ; Set active low and disabled endstops
                          M574 Z1 S2 ; Define Z to use Probe. Home to Min.
                          M558 P5 H5 F500 T4000 X0 Y0 Z1 ; Set Z probe type/mode 5. Not using on XY, but using it on Z.
                          G31 P25 X0 Y-25.3 Z0.0 ; Z probe trigger value, offset in relation to nozzle. And trigger height

                          ; Z-Probe
                          M574 Z1 S2 ; Set endstops controlled by probe
                          M307 H7 A-1 C-1 D-1 ; Disable heater on PWM channel for BLTouch
                          M558 P9 H5 F100 T2000 ; Set Z probe type to bltouch and the dive height + speeds
                          G31 X0 Y0 Z0 P25 ; Set Z probe trigger value, offset and trigger height
                          M557 X220:220 Y-220:220 S20 ; Define mesh grid

                          ; BLTouch - Heaters
                          M307 H7 A-1 C-1 D-1 ; Disable the 7th Heater to free up PWM channel 5 on the Duex board.

                          ; Heaters
                          M140 H-1 ; Disable heated bed
                          M305 P1 T100000 B4725 C7.060000e-8 R4700 ; Set thermistor + ADC parameters for heater 1
                          M143 H1 S280 ; Set temperature limit for heater 1 to 280C

                          ; Fans
                          M106 P0 S0 I0 F500 H-1 C ; Part cooling fan
                          M106 P1 S1 I0 F500 H1 T45 ; Set fan 1 value, PWM signal inversion and frequency. Thermostatic control is turned on

                          ; Tools
                          M563 P0 D0 H1 ; Define tool 0
                          G10 P0 X0 Y0 Z0 ; Set tool 0 axis offsets
                          G10 P0 R0 S0 ; Set initial tool 0 active and standby temperatures to 0C

                          ; Automatic saving after power loss is not enabled

                          ; Custom settings are not configured

                          ; Miscellaneous
                          T0 ; Select first tool

                          ; homeall.g
                          ; called to home all axes
                          ;
                          ; generated by RepRapFirmware Configuration Tool v2 on Tue Jul 23 2019 21:10:42 GMT+0100 (BST)
                          G91 ; relative positioning
                          G1 Z15 F6000 S2 ; lift Z relative to current position
                          G1 S1 Y-445 F1800 ; move quickly to Y axis endstop and stop there (first pass)
                          G1 Y5 F6000 ; go back a few mm
                          G1 S1 Y-445 F360 ; move slowly to Y axis endstop once more (second pass)
                          G1 S1 X-445 F1800 ; move quickly to X axis endstop and stop there (first pass)
                          G1 X5 F6000 ; go back a few mm
                          G1 S1 X-445 F360 ; move slowly to X axis endstop once more (second pass)
                          G90 ; absolute positioning
                          G1 X0 Y0 F6000 ; go to first bed probe point and home Z
                          G30 ; home Z by probing the bed

                          ; Uncomment the following lines to lift Z after probing
                          ;G91 ; relative positioning
                          ;G1 S2 Z15 F100 ; lift Z relative to current position
                          ;G90 ; absolute positioning

                          ; homez.g
                          ; called to home the Z axis
                          ;
                          ; generated by RepRapFirmware Configuration Tool v2 on Tue Jul 23 2019 21:10:42 GMT+0100 (BST)

                          G30 ; Do a single probe to home our Z axis
                          G90 ; Make sure we are in absolute mode
                          G1 Z10 F6000 ; Rapidly move the Z axis to Z=10.

                          ; Uncomment the following lines to lift Z after probing
                          ;G91 ; relative positioning
                          ;G1 S2 Z15 F100 ; lift Z relative to current position
                          ;G90 ; absolute positioning

                          ; homex.g
                          ; called to home the X axis
                          ;
                          ; generated by RepRapFirmware Configuration Tool v2 on Tue Jul 23 2019 21:10:42 GMT+0100 (BST)
                          G91 ; relative positioning
                          G1 Z15 F6000 S2 ; lift Z relative to current position
                          G1 S1 X-445 F1800 ; move quickly to X axis endstop and stop there (first pass)
                          G1 X5 F6000 ; go back a few mm
                          G1 S1 X-445 F360 ; move slowly to X axis endstop once more (second pass)
                          G1 Z-15 F6000 S2 ; lower Z again
                          G90 ; absolute positioning

                          ; homey.g
                          ; called to home the Y axis
                          ;
                          ; generated by RepRapFirmware Configuration Tool v2 on Tue Jul 23 2019 21:10:42 GMT+0100 (BST)
                          G91 ; relative positioning
                          G1 Z15 F6000 S2 ; lift Z relative to current position
                          G1 S1 Y-445 F1800 ; move quickly to Y axis endstop and stop there (first pass)
                          G1 Y5 F6000 ; go back a few mm
                          G1 S1 Y-445 F360 ; move slowly to Y axis endstop once more (second pass)
                          G1 Z-15 F6000 S2 ; lower Z again
                          G90 ; absolute positioning

                          ; deployprobe.g
                          ; called to deploy a physical Z probe
                          ;
                          ; generated by RepRapFirmware Configuration Tool v2 on Tue Jul 23 2019 21:10:42 GMT+0100 (BST)
                          M280 P3 S10 I1

                          ; retractprobe.g
                          ; called to retract a physical Z probe
                          ;
                          ; generated by RepRapFirmware Configuration Tool v2 on Tue Jul 23 2019 21:10:42 GMT+0100 (BST)
                          M280 P3 S90 I1

                          Phaedruxundefined 1 Reply Last reply Reply Quote 0
                          • Phaedruxundefined
                            Phaedrux Moderator @Stevo
                            last edited by

                            @stevo said in Pay for config / json files for my corexy printer build.:

                            ; Endstops
                            M574 X1 Y1 S0 ; Set active low and disabled endstops
                            M574 Z1 S2 ; Define Z to use Probe. Home to Min.
                            M558 P5 H5 F500 T4000 X0 Y0 Z1 ; Set Z probe type/mode 5. Not using on XY, but using it on Z.
                            G31 P25 X0 Y-25.3 Z0.0 ; Z probe trigger value, offset in relation to nozzle. And trigger height
                            ; Z-Probe
                            M574 Z1 S2 ; Set endstops controlled by probe
                            M307 H7 A-1 C-1 D-1 ; Disable heater on PWM channel for BLTouch
                            M558 P9 H5 F100 T2000 ; Set Z probe type to bltouch and the dive height + speeds
                            G31 X0 Y0 Z0 P25 ; Set Z probe trigger value, offset and trigger height
                            M557 X220:220 Y-220:220 S20 ; Define mesh grid
                            ; BLTouch - Heaters
                            M307 H7 A-1 C-1 D-1 ; Disable the 7th Heater to free up PWM channel 5 on the Duex board.

                            You've got a few commands duplicated there. You should probably clean those up to prevent future confusion.

                            @stevo said in Pay for config / json files for my corexy printer build.:

                            G1 X0 Y0 F6000 ; go to first bed probe point and home Z
                            G30 ; home Z by probing the bed

                            It would seem you are using 0,0 as bed center? Just checking.

                            @stevo said in Pay for config / json files for my corexy printer build.:

                            ; homez.g
                            ; called to home the Z axis
                            ;
                            ; generated by RepRapFirmware Configuration Tool v2 on Tue Jul 23 2019 21:10:42 GMT+0100 (BST)
                            G30 ; Do a single probe to home our Z axis
                            G90 ; Make sure we are in absolute mode
                            G1 Z10 F6000 ; Rapidly move the Z axis to Z=10.

                            You may want to add a G1 X Y move before the G30 to place the probe in the same location as you do in homeall for consistency, unless you have different plans for using homez alone in certain situations. That's valid, but just be aware that G28 and G28 Z will give you very different results.

                            @stevo said in Pay for config / json files for my corexy printer build.:

                            ; BLTouch - Heaters
                            M307 H7 A-1 C-1 D-1 ; Disable the 7th Heater to free up PWM channel 5 on the Duex board.

                            @stevo said in Pay for config / json files for my corexy printer build.:

                            ; deployprobe.g
                            ; called to deploy a physical Z probe
                            ;
                            ; generated by RepRapFirmware Configuration Tool v2 on Tue Jul 23 2019 21:10:42 GMT+0100 (BST)
                            M280 P3 S10 I1

                            You're unbinding heater pin 7, but then you're targeting servo 3 in your deploy and retract commands. I think this is the reason the probe isn't doing anything. If you are actually using pin 7, then change the servo commands to be P7 instead of P3.

                            Did you test the deploy and retract macros? What happens if you send M401 and M402? (should be deploy and retract)

                            Use this procedure for safely testing your probe. https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe

                            Z-Bot CoreXY Build | Thingiverse Profile

                            Stevoundefined 1 Reply Last reply Reply Quote 0
                            • Stevoundefined
                              Stevo @Phaedrux
                              last edited by

                              @phaedrux Thank you for the help as always much appreciated!

                              Will report back once I have sorted my mess out lol.

                              1 Reply Last reply Reply Quote 0
                              • Stevoundefined
                                Stevo
                                last edited by

                                Evening all,
                                Now have signs of life from the BL touch on hitting the home button the bed lowers 15mm the y axis then homes followed by the x axis homing and then the printhead moves to the middle of the machine and deploys the probe and upon touching the bed and retracting the table lowers 15mm again.
                                Its a little hit and miss as sometimes when I turn the machine on the bl will just flash red and will not deploy at the z axis homing stage.
                                If I actually deploy the prove manually after one of these instances but prior to powering the machine on everything seems to be ok ?

                                ; Configuration file for Duet WiFi (firmware version 1.21)
                                ; executed by the firmware on start-up
                                ;
                                ; generated by RepRapFirmware Configuration Tool v2 on Tue Jul 23 2019 21:10:42 GMT+0100 (BST)

                                ; General preferences
                                G90 ; Send absolute coordinates...
                                M83 ; ...but relative extruder moves

                                M669 K1 ; Select CoreXY mode

                                ; Network
                                M550 P"WILE E COYOTE" ; Set machine name
                                M552 S1 ; Enable network
                                ;*** Access point is configured manually via M587
                                M586 P0 S1 ; Enable HTTP
                                M586 P1 S0 ; Disable FTP
                                M586 P2 S0 ; Disable Telnet

                                ; Drives
                                M569 P0 S1 ; Physical drive 0 goes forwards
                                M569 P1 S1 ; Physical drive 1 goes forwards
                                M569 P2 S0 ; Physical drive 2 goes backwards
                                M569 P3 S1 ; Physical drive 3 goes forwards
                                M350 X16 Y16 Z16 E16 I1 ; Configure microstepping with interpolation
                                M92 X80.00 Y80.00 Z1600.00 E420.00 ; Set steps per mm
                                M566 X900.00 Y900.00 Z30.00 E2400 ; Set maximum instantaneous speed changes (mm/min)
                                M203 X6000.00 Y6000.00 Z144.00 E1200.00 ; Set maximum speeds (mm/min)
                                M201 X500.00 Y500.00 Z20.00 E250.00 ; Set accelerations (mm/s^2)
                                M906 X800.00 Y800.00 Z2000.00 E800.00 I30 ; Set motor currents (mA) and motor idle factor in per cent
                                M84 S30 ; Set idle timeout

                                ; Axis Limits
                                M208 X-220 Y-220 Z0 S1 ; Set axis minima
                                M208 X220 Y220 Z660 S0 ; Set axis maxima

                                ; Endstops
                                M574 X1 Y1 S0 ; Set active low and disabled endstops
                                M574 Z1 S2 ; Define Z to use Probe. Home to Min.
                                M558 P5 H5 F500 T4000 X0 Y0 Z1 ; Set Z probe type/mode 5. Not using on XY, but using it on Z.
                                G31 P25 X0 Y-25.3 Z0.0 ; Z probe trigger value, offset in relation to nozzle. And trigger height adjustment

                                ; Z-Probe
                                M574 Z1 S2 ; Set endstops controlled by probe
                                M307 H7 A-1 C-1 D-1 ; Disable heater on PWM channel for BLTouch
                                M558 P9 H15 F120 T6000 ; Set Z probe type to bltouch and the dive height + speeds
                                G31 P500 X32 Y2 Z2.5 ; Set Z probe trigger value, offset and trigger height
                                M557 X220:220 Y-220:220 S20 ; Define mesh grid

                                ; Heaters
                                M140 H-1 ; Disable heated bed
                                M305 P1 T100000 B4725 C7.060000e-8 R4700 ; Set thermistor + ADC parameters for heater 1
                                M143 H1 S280 ; Set temperature limit for heater 1 to 280C

                                ; Fans
                                M106 P0 S0 I0 F500 H-1 ; Set fan 0 value, PWM signal inversion and frequency. Thermostatic control is turned on
                                M106 P1 S1 I0 F500 H1 T45 ; Set fan 1 value, PWM signal inversion and frequency. Thermostatic control is turned on

                                ; Tools
                                M563 P0 D0 H1 ; Define tool 0
                                G10 P0 X0 Y0 Z0 ; Set tool 0 axis offsets
                                G10 P0 R0 S0 ; Set initial tool 0 active and standby temperatures to 0C

                                ; Automatic saving after power loss is not enabled

                                ; Custom settings are not configured

                                ; Miscellaneous
                                T0 ; Select first tool

                                ; homeall.g
                                ; called to home all axes
                                ;
                                ; generated by RepRapFirmware Configuration Tool v2 on Tue Jul 23 2019 21:10:42 GMT+0100 (BST)
                                G91 ; relative positioning
                                G1 Z15 F6000 S2 ; lift Z relative to current position
                                G1 S1 Y-445 F1800 ; move quickly to Y axis endstop and stop there (first pass)
                                G1 Y5 F6000 ; go back a few mm
                                G1 S1 Y-445 F360 ; move slowly to Y axis endstop once more (second pass)
                                G1 S1 X-445 F1800 ; move quickly to X axis endstop and stop there (first pass)
                                G1 X5 F6000 ; go back a few mm
                                G1 S1 X-445 F360 ; move slowly to X axis endstop once more (second pass)
                                G90 ; absolute positioning
                                G1 X0 Y0 F6000 ; go to first bed probe point and home Z
                                G30 ; home Z by probing the bed

                                ; Uncomment the following lines to lift Z after probing
                                ;G91 ; relative positioning
                                ;G1 S2 Z15 F100 ; lift Z relative to current position
                                ;G90 ; absolute positioning

                                ; homex.g
                                ; called to home the X axis
                                ;
                                ; generated by RepRapFirmware Configuration Tool v2 on Tue Jul 23 2019 21:10:42 GMT+0100 (BST)
                                G91 ; relative positioning
                                G1 Z15 F6000 S2 ; lift Z relative to current position
                                G1 S1 X-445 F1800 ; move quickly to X axis endstop and stop there (first pass)
                                G1 X5 F6000 ; go back a few mm
                                G1 S1 X-445 F360 ; move slowly to X axis endstop once more (second pass)
                                G1 Z-15 F6000 S2 ; lower Z again
                                G90 ; absolute positioning

                                ; homey.g
                                ; called to home the Y axis
                                ;
                                ; generated by RepRapFirmware Configuration Tool v2 on Tue Jul 23 2019 21:10:42 GMT+0100 (BST)
                                G91 ; relative positioning
                                G1 Z15 F6000 S2 ; lift Z relative to current position
                                G1 S1 Y-445 F1800 ; move quickly to Y axis endstop and stop there (first pass)
                                G1 Y5 F6000 ; go back a few mm
                                G1 S1 Y-445 F360 ; move slowly to Y axis endstop once more (second pass)
                                G1 Z-15 F6000 S2 ; lower Z again
                                G90 ; absolute positioning

                                ; homez.g
                                ; called to home the Z axis
                                ;
                                ; generated by RepRapFirmware Configuration Tool v2 on Tue Jul 23 2019 21:10:42 GMT+0100 (BST)
                                G91 ; relative positioning
                                G1 Z15 F6000 S2 ; lift Z relative to current position
                                G90 ; absolute positioning
                                G1 X0 Y0 F6000 ; go to first probe point
                                G30 ; home Z by probing the bed

                                ; Uncomment the following lines to lift Z after probing
                                ;G91 ; relative positioning
                                ;G1 S2 Z15 F100 ; lift Z relative to current position
                                ;G90 ; absolute positioning

                                Phaedruxundefined 1 Reply Last reply Reply Quote 0
                                • dc42undefined
                                  dc42 administrators
                                  last edited by

                                  Some people add a command to reset the BLTouch out of an error state, before using it for probing. You can add this command in homez.g and homeall.g (before the G30 command), and if you wish in bed.g. It's an M280 command but I forget the details. You may need a short G4 delay command after it, to make sure that the reset happens before the firmware tries to deploy the probe.

                                  Duet WiFi hardware designer and firmware engineer
                                  Please do not ask me for Duet support via PM or email, use the forum
                                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                                  1 Reply Last reply Reply Quote 0
                                  • Phaedruxundefined
                                    Phaedrux Moderator @Stevo
                                    last edited by

                                    @stevo said in Pay for config / json files for my corexy printer build.:

                                    when I turn the machine on the bl will just flash red and will not deploy at the z axis homing stage.

                                    Try adding this to the end of your config.g to clear any BLTouch errors and retract the pin just in case.

                                    ; BLTOUCH PREP
                                    ;
                                    G4 S1
                                    M280 P7 S160 I1 		; Alarm Release and Push-Pin UP just in case it's in alarm and deployed
                                    G4 S1
                                    M402				; Retract probe just in case it's down
                                    

                                    M558 P5 H5 F500 T4000 X0 Y0 Z1
                                    G31 P25 X0 Y-25.3 Z0.0 ;

                                    You've still got some probe settings duplicated in the endstops and zprobe section.

                                    Z-Bot CoreXY Build | Thingiverse Profile

                                    1 Reply Last reply Reply Quote 0
                                    • Stevoundefined
                                      Stevo
                                      last edited by

                                      Thank you that's done the trick !

                                      1 Reply Last reply Reply Quote 0
                                      • Stevoundefined
                                        Stevo
                                        last edited by Stevo

                                        Evening all,

                                        Just wanted to ask when the printer has finished its task how / where do I ask it to lower the bed and come back to the homing corner minima on x and y to cool print head down bearing in mind my origin is the centre of the build plate.

                                        M104 S0 ;Turn off extruder heater
                                        G91 ;Relative positioning
                                        G1 Z 10 E-5 F300 ; Lower bed by 10mm and retract filament by 5mm
                                        G1 S1 Y-150 X-150 F500 ;Move nozzle 150mm home direction out of the way of finished print.
                                        M84 ;Motors off
                                        G90 ;Absolute positioning

                                        1 Reply Last reply Reply Quote 0
                                        • zaptaundefined
                                          zapta
                                          last edited by

                                          Does this help? https://forum.duet3d.com/topic/6760/stop-g

                                          Stevoundefined 1 Reply Last reply Reply Quote 0
                                          • Stevoundefined
                                            Stevo @zapta
                                            last edited by

                                            @zapta thank you !

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA