Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Help to setup BMG clone extruder

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    13
    40
    6.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • zaptaundefined
      zapta
      last edited by

      @Phaedrux said in Help to setup BMG clone extruder:

      ... there's valid arguments for supporting the innovators.

      A Donate link would be useful here.

      1 Reply Last reply Reply Quote 0
      • DocTruckerundefined
        DocTrucker
        last edited by

        No arguments with either of you there!

        I was going to be say it would be awesome if a proportion the 'balancing' tax on the clones at import went back to the original developers of the cloned open source items! Alas the logistics would be challenging.

        Running 3 P3Steel with Duet 2. Duet 3 on the shelf looking for a suitable machine. One first generation Duet in a Logo/Turtle style robot!

        deckingmanundefined 1 Reply Last reply Reply Quote 1
        • deckingmanundefined
          deckingman @DocTrucker
          last edited by

          @DocTrucker Each individual has their own opinion of what is right and what is wrong and it's not my place to make moral judgements. But at the same time, I have my own set of values by which I run my own life. For that reason, if a person buys a clone then I personally will not offer to help them, because to do so would be helping the vendor or maker of the clone, which is against my own personal principles.

          Ian
          https://somei3deas.wordpress.com/
          https://www.youtube.com/@deckingman

          DocTruckerundefined A Former User? zaptaundefined 3 Replies Last reply Reply Quote 1
          • DocTruckerundefined
            DocTrucker @deckingman
            last edited by

            @deckingman fair enough fella.

            Running 3 P3Steel with Duet 2. Duet 3 on the shelf looking for a suitable machine. One first generation Duet in a Logo/Turtle style robot!

            deckingmanundefined 1 Reply Last reply Reply Quote 0
            • deckingmanundefined
              deckingman @DocTrucker
              last edited by

              @DocTrucker .......but buying used or second hand is OK in my book 😀

              Ian
              https://somei3deas.wordpress.com/
              https://www.youtube.com/@deckingman

              DocTruckerundefined 1 Reply Last reply Reply Quote 0
              • DocTruckerundefined
                DocTrucker @deckingman
                last edited by DocTrucker

                @deckingman 😄 😉

                Edit: Nothing else on offer now you've a duet3 is there?...

                Running 3 P3Steel with Duet 2. Duet 3 on the shelf looking for a suitable machine. One first generation Duet in a Logo/Turtle style robot!

                1 Reply Last reply Reply Quote 0
                • TPJensenundefined
                  TPJensen @DocTrucker
                  last edited by

                  @DocTrucker said in Help to setup BMG clone extruder:

                  clone Duets

                  I would like to make this clear I do NOT have clone duet. 🙂

                  DocTruckerundefined 1 Reply Last reply Reply Quote 0
                  • DocTruckerundefined
                    DocTrucker @TPJensen
                    last edited by

                    @TPJensen Didn't mean to imply you had, sorry if it came across like that.

                    Running 3 P3Steel with Duet 2. Duet 3 on the shelf looking for a suitable machine. One first generation Duet in a Logo/Turtle style robot!

                    TPJensenundefined 1 Reply Last reply Reply Quote 0
                    • TPJensenundefined
                      TPJensen @DocTrucker
                      last edited by

                      @DocTrucker said in Help to setup BMG clone extruder:

                      @TPJensen Didn't mean to imply you had, sorry if it came across like that.

                      That is okay... dont worry I like your post and follow you 100%...
                      I have a mate that did buy his first printer 1½ years ago and he did buy alot of clone things and I helped as good as I could.... Now the same mate have only orig. parts and 6 printers.... Untill I started to help him he had given up and put his printer up for sale put with a little help he went from boring failed prints to good prints and he did thing is was fun and he has just ordered Ultimaker 2+ Extended.. So if your help one also with clone parts then it can be good for the original company also.. (in this case very good)

                      Just has you also say @DocTrucker 🙂

                      1 Reply Last reply Reply Quote 0
                      • zaptaundefined
                        zapta
                        last edited by

                        Does the Duet license forbids commercial cloning? If not, they must have their reasoning for allowing it.

                        grizewaldundefined 1 Reply Last reply Reply Quote 0
                        • grizewaldundefined
                          grizewald @zapta
                          last edited by

                          @zapta said in Help to setup BMG clone extruder:

                          Does the Duet license forbids commercial cloning? If not, they must have their reasoning for allowing it.

                          No. See: https://raw.githubusercontent.com/T3P3/Duet/master/LICENSE

                          zaptaundefined 1 Reply Last reply Reply Quote 0
                          • zaptaundefined
                            zapta @grizewald
                            last edited by zapta

                            @grizewald said in Help to setup BMG clone extruder:

                            No. See: https://raw.githubusercontent.com/T3P3/Duet/master/LICENSE

                            Some developers choose to allow commercial competition (e.g. Arduino, Duet), some not, and some even include license hardware in their product (e.g. Teensy). Each and their goals and considerations. Would be interesting to hear Duet's explanation why they chose to allow.

                            grizewaldundefined DocTruckerundefined 2 Replies Last reply Reply Quote 1
                            • grizewaldundefined
                              grizewald @zapta
                              last edited by

                              @zapta If you watch Tom Sanladerer's video from today, he asked exactly that question.

                              1 Reply Last reply Reply Quote 0
                              • Danalundefined
                                Danal @DocTrucker
                                last edited by Danal

                                @DocTrucker said in Help to setup BMG clone extruder:

                                However in terms of the effect of clones on the original company what is the difference between me buying second hand rather than new compared to me buying a clone? For instance in the cold light of day I would have to say the logical conclusion is likely to be I am causing just as much damage to Duet3D buying second hand and asking questions on here as I would be if I had bought a clone.

                                Absolutely NOT damaging to purchase second hand. In fact, it HELPS the original company establish value, and brand equity. It helps quite a bit. It's called a "Healthy secondary market". Knowing that a given product can be re-sold for more than a pittance, that knowledge helps original purchasers make the decision to buy that product up front.

                                Contrast that to a clone. No benefit to the original, and a high potential to damage brand equity, because of poor clone quality.

                                I could expand on both statements above quite a bit... I think people get the point, so I'll keep it short.

                                Delta / Kossel printer fanatic

                                DocTruckerundefined 1 Reply Last reply Reply Quote 0
                                • DocTruckerundefined
                                  DocTrucker @Danal
                                  last edited by DocTrucker

                                  @Danal appreciate the different view point. I was considering it from a purely revenue point of view.

                                  Edit: That makes sense to me, and I can see why second hand is better than clone for companies like Duet3D that have embraced Open Source. With terms like 'planned obsolescence' kicking around it is not always embraced by all industries, some of which purely see coin as king and look little further in directing their business. The latter likely to be a failing of shareholders who only care for their dividend.

                                  Running 3 P3Steel with Duet 2. Duet 3 on the shelf looking for a suitable machine. One first generation Duet in a Logo/Turtle style robot!

                                  1 Reply Last reply Reply Quote 1
                                  • DocTruckerundefined
                                    DocTrucker @zapta
                                    last edited by DocTrucker

                                    @zapta said in Help to setup BMG clone extruder:

                                    Would be interesting to hear Duet's explanation why they chose to allow.

                                    As I mentioned before I imagine they are able to punch above their weight due to the the community pitching in on support. But there is more to it.

                                    The more restrictions put on something the more you come across as self centred and closed. RADDS being an example of something that should have really killed off RAMPS but the fuss around the open source but not open source left it struggling for a market corner. It's there, but not as much as it should have been. ...or is my exposure to Duets clouding my judgement a little and far more RADDS boards were shipped than Duet v0.6/v0.8.5?

                                    Allowing others the right to manufacture also removes a little of the worry about 'what if company x goes bang' for companies who rely on the Duet hardware in their business. License restrictions don't always die with the company. So for bigger (edit: read as customer) companies it allows a little more room for letting the guard down a little and not spending too much resource maintaining familiarity with a secondary architecture.

                                    Running 3 P3Steel with Duet 2. Duet 3 on the shelf looking for a suitable machine. One first generation Duet in a Logo/Turtle style robot!

                                    1 Reply Last reply Reply Quote 0
                                    • DocTruckerundefined
                                      DocTrucker
                                      last edited by DocTrucker

                                      Three on the bounce, sorry! Final point on this one before I drop back to my code and Primordial Radio podcast....

                                      Another factor about this is trust and honestly. If you completely open source the product and don't limit the manufacture then you are leaving your self open to being undercut. Due to that you aren't likely to mark up your products as heavily as a closed company. You are outwardly stating you don't think you are unduly profiteering from your product. I'd say this is borne out by the difference in price of genuine to clone duets. Yes it is a significant value, but not something like a quarter of the original price despite being manufactured in a far cheaper location with little development costs, no support, and little government and environmental oversight.

                                      The margins on Bondtech are more stark, but as I illuded to before the cloners have cut cost by tooling up for injection molding. This was a gamble by them, as there is a significant investment in at least time to get a tool running well before you can make your £0.40 copies. It also means they are not as free to innovate (fat chance, more like cut more cost) or adapt. It wouldn't surprise me if a ready to run tool would cost a UK company £10-20k. The cloners will also be tolerating a larger deviance from spec than Bondtech, and additionally may have made other sacrifices in either material quality (maybe even legality) and design for manufacture to reduce costs. In addition they can't innovate as quick as the original developers.

                                      Because Bondtech (I'm assuming these are open source and not being illegally copied?) and Duet3D are Open Source and planned for such the cloners are likely to need to cut corners in order to offer any reduction in price. For both that maybe being a few revisions behind current and for Duet that may include hidden corner cuts like the thickness of copper tracks.

                                      As others have said it would be unfair to evaluate a Bondtech with a clone. The titans are cloned too. I had a job lot of genuine E3D stuff from a seller on ebay (who was moving out of the business) and that included a clone titan (which wasn't complete - so I ironically bought the spares from E3D meaning they profited from a clone!) that I tried using on one of my Ormerods and it proved both worse than the RepRapPro style extruder and the genuine article years ago. Likewise the clone Bondtech I have isn't on parr with the genuine article that I have also used.

                                      I do look forward to casting out the two clones I have - the clone titan is not in use! The only way I could have bought Bondtechs right now would have been on Finance. Yes I could have afforded the cost but that money would be better spent on filament and tolerating a RepRap extruder for a bit longer. Current price for a Bondtech (yeah, I've been spelling it wrong!) is £76.51 after conversion to Sterling from Euro. Bank of England base rate on interest is 0.75%, lets say 5% for the sake of argument. So I have cost a bank or lender in the order of £12 in lost interest over the maximum of 3 years that I intend to use them. However, had the clone option not have been there I would have gone RepRap and so it is a fake lost profit if that makes any sense?

                                      Running 3 P3Steel with Duet 2. Duet 3 on the shelf looking for a suitable machine. One first generation Duet in a Logo/Turtle style robot!

                                      grizewaldundefined 1 Reply Last reply Reply Quote 0
                                      • sinned6915undefined
                                        sinned6915
                                        last edited by

                                        @TPJensen How are you fairing so far?

                                        Esteps on the extruder is a hardware value. It is best set it to your machine EXACTLY, not what is published.

                                        Use your best toleranced filament and compute it. The longer the sample that you use for calibration the better it will average out any error.

                                        I use the cold extrude gcode, remove the bowden tube from the hotend, cut the filament flush to the tube, extrude a meter, 1000mm and measure with a metric tape measure from the end to the bowden tube face. Even with inaccuracy of a tape measure, it comes out pretty good. At 1000mm, the error of what you might make reading a 100mm sample is going to average down to 1/10 of that.

                                        The difference you might see when you are printing is going to be from differences in filament diameter and 'die swell' for lack of a better term. some filaments swell when they are heated and extruded, an ti can change at different temps too.

                                        Depending on your slicer, there are ways to tweak it in the slicer profile. If you have an extrusion factor for example. In Slic3r PE, for some PLA I have it as low as 0.93 or even 0.88 for some really fussy stuff.

                                        You can use the extrusion multiplier on the PanelDue or DWC, but the risk there is you forget that you fussed with it there and if you dont clear it, the next print when you change filaments could get messed up. I just use that adjustment to figure out the extrusion factor to put back into the slicer.

                                        sinneD

                                        ps: I have both original Bondtech and clone BMG's and QR's. Its a night and day difference in the real deal. At least buy the real gears from Martin. You wont be sorry.

                                        TPJensenundefined 1 Reply Last reply Reply Quote 1
                                        • A Former User?
                                          A Former User @deckingman
                                          last edited by

                                          @deckingman said in Help to setup BMG clone extruder:

                                          @DocTrucker Each individual has their own opinion of what is right and what is wrong and it's not my place to make moral judgments. But at the same time, I have my own set of values by which I run my own life. For that reason, if a person buys a clone then I personally will not offer to help them, because to do so would be helping the vendor or maker of the clone, which is against my own personal principles.

                                          Nothing personal and I respect your choice, but im afraid it is a total oxymoron.

                                          On the one hand you say

                                          "it's not my place to make moral judgments"

                                          Then on the other you say

                                          "I have my own set of values by which I run my own life. For that reason, if a person buys a clone then I personally will not offer to help them"

                                          That by its very definition is a moral judgement................

                                          1 Reply Last reply Reply Quote 1
                                          • A Former User?
                                            A Former User
                                            last edited by A Former User

                                            I Have relayed before I purchased a cloned Duet 2 Wifi, from Fsytech I think, purely for comparison purposes, it is not used in a live machine, it's still in a box unused to this day

                                            I also offered to donate this clone to the Duet team if they wanted to dissect it, but they either missed the post where I made the offer or they chose to not take up the offer.

                                            I have a total of 18 genuine Duet-2 boards (7 in home machines & 11 at work) plus 1 Duet-3 so im quite comfortable that I have done my part in supporting Duet3D.

                                            From looking at the two boards, the clone beside a genuine under a stereo scope there is a few subtle differences, enough differences to see that corners have been cut and its a good idea to stick with a genuine board.

                                            A pic of the clone beside a genuine board (and the offer for me to ship it to Duet3D still stands if they want the board for comparison purposes)

                                            alt text

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA