Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    RepRapFirmware 3.0 is released!

    Scheduled Pinned Locked Moved
    Firmware installation
    33
    131
    11.3k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • dc42undefined
      dc42 administrators @DaBit
      last edited by

      @DaBit said in RepRapFirmware 3.0 is released!:

      The RRF config tool generates this code:

      ; Endstops
      M574 X1 S0 P"xstop"                                    ; configure active-low endstop for low end on X via pin xstop
      M574 Y2 S0 P"ystop"                                    ; configure active-low endstop for high end on Y via pin ystop
      M574 Z1 S2                                             ; configure Z-probe endstop for low end on Z
      

      Which is not correct; according to the M574 documentation the S parameter should be 1 (microswitch-type endstop), and I suppose I need to do the inversion on the pins. Which seems to work:

      You are correct. We'll get configtool fixed.

      Next is Z homing. My RRF3 homez.g script, taken from the configurator and adjusted coordinates:
      ...
      The G1 H2 X115 Y115 fails, and actually moves to X115 Y0? I suppose it moves the CoreXY motors independently. Removing the H2 does not work; you cannot move axes that are not homed yet.

      The H2 should be removed. Surely X and Y have been homed by that point? It doesn't make sense to try to home Z using a Z probe if you can't set the XY coordinates.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      1 Reply Last reply Reply Quote 0
      • DaBitundefined
        DaBit
        last edited by

        X and Y have been homed before Z.
        I tested by accidentally removing the H2 at the first Z-lift too, my bad.

        This works:

        ; homez.g
        ; called to home the Z axis
        
        G91                ; relative positioning
        G1 H2 Z5 F6000     ; lift Z relative to current position
        G90                ; absolute positioning
        G1 X115 Y115 F6000 ; go to first probe point
        G30                ; home Z by probing the bed
        G91                ; relative positioning
        G1 Z5 F6000        ; lift Z relative to current position
        G90                ; absolute positioning
        

        Anyway, the RRF configurator is generating (imho) wrong code for this too; it produces a H2 for both the lift-Z and X/Y positioning moves.

        RRF config tool generated homez.g:

        ; homez.g
        ; called to home the Z axis
        ;
        ; generated by RepRapFirmware Configuration Tool v2.1.4 on Sun Jan 05 2020 10:48:15 GMT+0100 (Midden-Europese standaardtijd)
        G91                ; relative positioning
        G1 H2 Z5 F6000     ; lift Z relative to current position
        G90                ; absolute positioning
        G1 H2 X19 Y1 F6000 ; go to first probe point
        G30                ; home Z by probing the bed
        
        ; Uncomment the following lines to lift Z after probing
        ;G91               ; relative positioning
        ;G1 H2 Z5 F100     ; lift Z relative to current position
        ;G90               ; absolute positioning
        
        1 Reply Last reply Reply Quote 0
        • Alexander Mundyundefined
          Alexander Mundy
          last edited by

          FYI for anyone else moving from early beta (before 11) I had to do the following:
          Define heaters and associated temp sensors
          Use M308 instead of M305
          Activate the pullup resistors for endstops and z probe if needed since they are not active by default
          I had remapped the bed heat and part cooling fans previously and had M950 H0 C"nil" and M950 H2 C"nil" but removed them since heaters are no longer automatically assigned.

          1 Reply Last reply Reply Quote 0
          • wilrikerundefined
            wilriker @tobias_munich
            last edited by

            @tobias_munich said in RepRapFirmware 3.0 is released!:

            Is the the paneldue running on the DUET3 with this release yet?
            saw that IO_0 should be reserved for this.

            Yes, it does. Connect it to IO_0 and it will work. If you are using Duet3 + SBC then everything related to job files and macros will not work on PanelDue because it cannot see those (maybe also contents of /sys, haven't checked that).

            Manuel
            Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
            with probably always latest firmware/DWC (incl. betas or self-compiled)
            My Tool Collection

            1 Reply Last reply Reply Quote 1
            • Hornetriderundefined
              Hornetrider
              last edited by

              Hi

              I am not sure if this is off topic in this thread...sorry...

              The symbols (double arrows) for Baby-Steps in the Print menu on Paneldue in combination with Duet3 and RRF3.0RC2 look different from RRF2.05 and are kind of missleading to me...
              Could there be an option to change them to something simpler like before?

              I am having real fun using the Duet3 and RRF3.0. Damn good job!

              dc42undefined 1 Reply Last reply Reply Quote 0
              • dc42undefined
                dc42 administrators @Hornetrider
                last edited by

                @Hornetrider said in RepRapFirmware 3.0 is released!:

                The symbols (double arrows) for Baby-Steps in the Print menu on Paneldue in combination with Duet3 and RRF3.0RC2 look different from RRF2.05 and are kind of missleading to me...

                They used to show up and down arrows, but users complained about this because on machines that move the bed in Z, the arrows pointed in the opposite direction to the resulting bed movement. So now they show the gap between the nozzle and bed increasing or decreasing.

                Duet WiFi hardware designer and firmware engineer
                Please do not ask me for Duet support via PM or email, use the forum
                http://www.escher3d.com, https://miscsolutions.wordpress.com

                Danalundefined 1 Reply Last reply Reply Quote 1
                • Danalundefined
                  Danal @dc42
                  last edited by

                  @dc42 said in RepRapFirmware 3.0 is released!:

                  they show the gap between the nozzle and bed increasing or decreasing

                  FWIW:

                  As someone who has both kinds of printers, those that move bed, and those that move nozzle, I could never figure out the old icons. The new "squeeze or separate" make it much more clear for all cases.

                  Delta / Kossel printer fanatic

                  1 Reply Last reply Reply Quote 0
                  • Hornetriderundefined
                    Hornetrider
                    last edited by

                    Yeah, I got it.

                    Didn't think about it, regarding the Z axis as moving bed...

                    Thin I will get used to it as soon as I have updated my second printer to RRF3.0...

                    1 Reply Last reply Reply Quote 0
                    • supernovaeundefined
                      supernovae
                      last edited by

                      Thanks for all your hard work @dc42! Love this update! Converted my HyperCube evo over and all is well (corexy)

                      1 Reply Last reply Reply Quote 0
                      • kraegarundefined
                        kraegar
                        last edited by

                        Just wanted to chime in that 3.0 is running on several RailCore's with both Duet 2's and Duet3's now with no reported troubles. Thanks for the great work @dc42 !

                        Co-Creator of the RailcoreII CoreXY printer
                        https://www.thingiverse.com/thing:2407174

                        dc42undefined 1 Reply Last reply Reply Quote 0
                        • dc42undefined
                          dc42 administrators @kraegar
                          last edited by

                          @kraegar, thanks for the feedback.

                          Do you have an application for conditional GCode on the RailCore?

                          Duet WiFi hardware designer and firmware engineer
                          Please do not ask me for Duet support via PM or email, use the forum
                          http://www.escher3d.com, https://miscsolutions.wordpress.com

                          kraegarundefined stewwyundefined 2 Replies Last reply Reply Quote 0
                          • kraegarundefined
                            kraegar @dc42
                            last edited by

                            @dc42 We definitely do! Auto-leveling until below a set threshold is the obvious first one. But I've had quite a few others as well - I have a systems admin background, so being able to script within gcode has been something I've wanted for a long time. Very much looking forward to it!

                            Co-Creator of the RailcoreII CoreXY printer
                            https://www.thingiverse.com/thing:2407174

                            1 Reply Last reply Reply Quote 0
                            • kraegarundefined
                              kraegar
                              last edited by

                              This is the "upgrade guide" I made for our users have been using to convert their RailCore's with a Duet2 to RRF3, if it's helpful to anyone else. It's taking our base RRF2.x config, and making it RRF3 compatible for new builds. There's a text document to describe the process for upgrading.

                              https://www.dropbox.com/sh/pg0ugu5qunokjc9/AAD8PkPqVGPp-yWV5Cug3_Usa?dl=0

                              Co-Creator of the RailcoreII CoreXY printer
                              https://www.thingiverse.com/thing:2407174

                              1 Reply Last reply Reply Quote 1
                              • stewwyundefined
                                stewwy @dc42
                                last edited by

                                @dc42 Must say this runs nicely, once I got over an error on my part, must learn to RTFI :-).

                                1 Reply Last reply Reply Quote 0
                                • DaBitundefined
                                  DaBit
                                  last edited by

                                  I did 15 hours of printing with RRF3 on the Duet. No failures due to RRF3. Random things I noticed:

                                  • I had to recalibrate the BLTouch triggerpoint to nozzle Z-offset. Difference with RRF2.05 is 0.12mm smaller.
                                  • Printing PusaSlicer generated brims at 60mm/s sounds a bit rougher than it did with 2.05. While printing the actual part I noticed no difference.
                                  • Some weirdness with 'pause print' and then not being able to cancel it in DWC. Might as well be an issue with running DWC on my (Android 7.1) phone; that usually takes a few reloads before DWC is displayed correctly anyway.
                                  DIY-O-Sphereundefined deckingmanundefined 2 Replies Last reply Reply Quote 0
                                  • DIY-O-Sphereundefined
                                    DIY-O-Sphere @DaBit
                                    last edited by

                                    @DaBit said in RepRapFirmware 3.0 is released!:

                                    Difference with RRF2.05 is 0.12mm smaller.

                                    I can confirm that for a Maestro.

                                    (UTC+1)

                                    A Former User? 1 Reply Last reply Reply Quote 0
                                    • matej1006undefined
                                      matej1006
                                      last edited by

                                      Hello i just upgrade and after upgrade it's show that
                                      ![alt text](9eaa4038-424a-4495-b744-c4ba10e60cd4-image.png image url)

                                      what i did wrong?

                                      Matej

                                      1 Reply Last reply Reply Quote 0
                                      • dc42undefined
                                        dc42 administrators
                                        last edited by

                                        I haven't tested RRF 3.0 with DWC 1.22.6. I suggest you upgrade to DWC 2.0.4.

                                        Duet WiFi hardware designer and firmware engineer
                                        Please do not ask me for Duet support via PM or email, use the forum
                                        http://www.escher3d.com, https://miscsolutions.wordpress.com

                                        1 Reply Last reply Reply Quote 0
                                        • matej1006undefined
                                          matej1006
                                          last edited by

                                          how i do that and what changes are with this DWC

                                          1 Reply Last reply Reply Quote 0
                                          • dc42undefined
                                            dc42 administrators
                                            last edited by

                                            Move the SD card to a PC and unzip DuetWebControl-2.0.4-SD.zip into the /www folder.

                                            You can find DWC release info at https://github.com/chrishamm/DuetWebControl/releases.

                                            Duet WiFi hardware designer and firmware engineer
                                            Please do not ask me for Duet support via PM or email, use the forum
                                            http://www.escher3d.com, https://miscsolutions.wordpress.com

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA