Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 3 Tool Board - Available?

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    7
    30
    1.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Hornetriderundefined
      Hornetrider
      last edited by

      no, this one:
      https://duet3d.dozuki.com/Wiki/Duet_3_Tool_Board

      1 Reply Last reply Reply Quote 1
      • dc42undefined
        dc42 administrators
        last edited by

        It's not available yet. We are currently finalising the design. My best guess is that we will ship the first ones in February next year.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • Hornetriderundefined
          Hornetrider
          last edited by

          Hi

          thx for the quick reply.
          Looking forward to implement it 🙂
          Just a quick question. Why are you planing a 4 wire CAN and additional 2 power wires for this board?
          Couldn't it be done with just 4 wires?
          Or is it for safety reasons to have the CAN controller powered independently like for valves?

          dc42undefined 1 Reply Last reply Reply Quote 0
          • dc42undefined
            dc42 administrators @Hornetrider
            last edited by

            @Hornetrider, we need to use 4 CAN wires so that you can daisy-chain tool boards. A board at the end of the CAN bus would only need 2 wires and a termination resistor.

            Power has to be provided separately from CAN.

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            1 Reply Last reply Reply Quote 0
            • mundsenundefined
              mundsen
              last edited by

              When will it be possible to order a tool board? price?

              Would be perfect for my printer because I have the Duet 3 + Pi in the lower part of the printer

              81382842_10219854719818941_7624977529329156096_n.jpg 73017618_10219126348610116_6116802791290699776_o.jpg

              dc42undefined 1 Reply Last reply Reply Quote 0
              • Danalundefined
                Danal
                last edited by

                On a sidetrack, nice to see a Pi display with DWC. That is what I am doing as well.

                Delta / Kossel printer fanatic

                1 Reply Last reply Reply Quote 1
                • dc42undefined
                  dc42 administrators @mundsen
                  last edited by

                  @mundsen said in Duet 3 Tool Board - Available?:

                  When will it be possible to order a tool board? price?

                  Within a few days from now. Planned price for direct sales is £39.50 + tax each, with a discount for 4.

                  Duet WiFi hardware designer and firmware engineer
                  Please do not ask me for Duet support via PM or email, use the forum
                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                  1 Reply Last reply Reply Quote 2
                  • mundsenundefined
                    mundsen
                    last edited by

                    Any news?
                    I`ll have to decide if I should start wireing the extruder/hotend, or wait for the Tool Board

                    ![alt text](@CorXY.jpg image url)

                    1 Reply Last reply Reply Quote 0
                    • dc42undefined
                      dc42 administrators
                      last edited by

                      I suggest you wait for the Tool Board. They are currently going through testing and we will announce their availability any day now.

                      btw Hemeras are in short supply now, due to the issues in China.

                      Duet WiFi hardware designer and firmware engineer
                      Please do not ask me for Duet support via PM or email, use the forum
                      http://www.escher3d.com, https://miscsolutions.wordpress.com

                      1 Reply Last reply Reply Quote 1
                      • mundsenundefined
                        mundsen
                        last edited by

                        ok, I`ll wait (my _Hemera is already installed 🙂 )

                        I`ll spend the time while waiting for the tool board to learn more about the rrf 3 firmware settings and get all my other functions correct

                        This is my first duet based printer project (RADDS/Repetier on my other projects) so a lot to learn - but I love that it is possible to edit the config files from the web server pages.. 🙂

                        If possible? you can add me to a pre order list for the Tool Board 🙂

                        1 Reply Last reply Reply Quote 0
                        • Danalundefined
                          Danal
                          last edited by

                          @mundsen said in Duet 3 Tool Board - Available?:

                          I love that it is possible to edit the config files from the web server pages..

                          And if you have questions about how a given line really works, issue that command from the web console. They take effect in real time.

                          Delta / Kossel printer fanatic

                          1 Reply Last reply Reply Quote 1
                          • mundsenundefined
                            mundsen
                            last edited by

                            Miss one limit switch input - on many RailCore printers there is a limit switch (Y axis) installed together with the extruder..

                            dc42undefined 1 Reply Last reply Reply Quote 0
                            • dc42undefined
                              dc42 administrators @mundsen
                              last edited by

                              @mundsen said in Duet 3 Tool Board - Available?:

                              Miss one limit switch input - on many RailCore printers there is a limit switch (Y axis) installed together with the extruder..

                              You could use the filament monitor input or the Z probe input for that, unless you already need both. Possibly also the second thermistor input.

                              Duet WiFi hardware designer and firmware engineer
                              Please do not ask me for Duet support via PM or email, use the forum
                              http://www.escher3d.com, https://miscsolutions.wordpress.com

                              1 Reply Last reply Reply Quote 1
                              • A Former User?
                                A Former User
                                last edited by

                                Hi Guys

                                @dc42

                                I am eagerly awaiting for the tool board to be released. In the mean time.

                                I see the tool board is supporting 12v fans, for those of us who exclusively run everything at 24v, will the tool board be able accept 24v fans to save mixing and matching fan voltages ?

                                dc42undefined 1 Reply Last reply Reply Quote 1
                                • dc42undefined
                                  dc42 administrators @A Former User
                                  last edited by

                                  @CaLviNx said in Duet 3 Tool Board - Available?:

                                  I see the tool board is supporting 12v fans, for those of us who exclusively run everything at 24v, will the tool board be able accept 24v fans to save mixing and matching fan voltages ?

                                  The tool board supports 12V fans only. Note, 24V fans with PWM and tacho support are not generally available.

                                  Duet WiFi hardware designer and firmware engineer
                                  Please do not ask me for Duet support via PM or email, use the forum
                                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                                  1 Reply Last reply Reply Quote 0
                                  • mundsenundefined
                                    mundsen
                                    last edited by

                                    Is it possible to get a 3d model? I want to design a housing for it for my printer - if not, the height of the largest component on the board?

                                    Am I going to get heat problems if i install it in a small enclosure?

                                    1 Reply Last reply Reply Quote 0
                                    • dc42undefined
                                      dc42 administrators
                                      last edited by

                                      No 3D model yet, but the dimensions are at https://duet3d.dozuki.com/Wiki/Duet_3_Tool_Board. The highest components are the terminal blocks, which are just under 9mm high. When the JST VH power lead is connected, the top of the latch is about 10mm above the top surface of the PCB.

                                      The PCB is 1.6mm thick and you should allow 3mm below it to clear the soldered joints.

                                      Duet WiFi hardware designer and firmware engineer
                                      Please do not ask me for Duet support via PM or email, use the forum
                                      http://www.escher3d.com, https://miscsolutions.wordpress.com

                                      1 Reply Last reply Reply Quote 0
                                      • mundsenundefined
                                        mundsen
                                        last edited by

                                        ToolBoard v2.png

                                        Designing in Fusion360 - made a simple toolboard template. Next I have to make the holes in the top cover.

                                        1 Reply Last reply Reply Quote 0
                                        • A Former User?
                                          A Former User
                                          last edited by

                                          @dc42

                                          Any update on the release of the tool board ?

                                          dc42undefined 1 Reply Last reply Reply Quote 0
                                          • dc42undefined
                                            dc42 administrators @A Former User
                                            last edited by dc42

                                            @CaLviNx said in Duet 3 Tool Board - Available?:

                                            @dc42

                                            Any update on the release of the tool board ?

                                            Tony will list them on the Duet3D shop soon. We expect to start shipping them this coming week.

                                            Duet WiFi hardware designer and firmware engineer
                                            Please do not ask me for Duet support via PM or email, use the forum
                                            http://www.escher3d.com, https://miscsolutions.wordpress.com

                                            mundsenundefined 1 Reply Last reply Reply Quote 1
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA