• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Duet 3 Tool Board - Available?

Scheduled Pinned Locked Moved
Duet Hardware and wiring
7
30
1.6k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    dc42 administrators
    last edited by 21 Dec 2019, 15:36

    It's not available yet. We are currently finalising the design. My best guess is that we will ship the first ones in February next year.

    Duet WiFi hardware designer and firmware engineer
    Please do not ask me for Duet support via PM or email, use the forum
    http://www.escher3d.com, https://miscsolutions.wordpress.com

    1 Reply Last reply Reply Quote 0
    • undefined
      Hornetrider
      last edited by 21 Dec 2019, 15:39

      Hi

      thx for the quick reply.
      Looking forward to implement it 🙂
      Just a quick question. Why are you planing a 4 wire CAN and additional 2 power wires for this board?
      Couldn't it be done with just 4 wires?
      Or is it for safety reasons to have the CAN controller powered independently like for valves?

      undefined 1 Reply Last reply 21 Dec 2019, 16:26 Reply Quote 0
      • undefined
        dc42 administrators @Hornetrider
        last edited by 21 Dec 2019, 16:26

        @Hornetrider, we need to use 4 CAN wires so that you can daisy-chain tool boards. A board at the end of the CAN bus would only need 2 wires and a termination resistor.

        Power has to be provided separately from CAN.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • undefined
          mundsen
          last edited by 9 Feb 2020, 12:06

          When will it be possible to order a tool board? price?

          Would be perfect for my printer because I have the Duet 3 + Pi in the lower part of the printer

          81382842_10219854719818941_7624977529329156096_n.jpg 73017618_10219126348610116_6116802791290699776_o.jpg

          undefined 1 Reply Last reply 9 Feb 2020, 15:26 Reply Quote 0
          • undefined
            Danal
            last edited by 9 Feb 2020, 15:22

            On a sidetrack, nice to see a Pi display with DWC. That is what I am doing as well.

            Delta / Kossel printer fanatic

            1 Reply Last reply Reply Quote 1
            • undefined
              dc42 administrators @mundsen
              last edited by 9 Feb 2020, 15:26

              @mundsen said in Duet 3 Tool Board - Available?:

              When will it be possible to order a tool board? price?

              Within a few days from now. Planned price for direct sales is £39.50 + tax each, with a discount for 4.

              Duet WiFi hardware designer and firmware engineer
              Please do not ask me for Duet support via PM or email, use the forum
              http://www.escher3d.com, https://miscsolutions.wordpress.com

              1 Reply Last reply Reply Quote 2
              • undefined
                mundsen
                last edited by 13 Feb 2020, 08:20

                Any news?
                I`ll have to decide if I should start wireing the extruder/hotend, or wait for the Tool Board

                ![alt text](@CorXY.jpg image url)

                1 Reply Last reply Reply Quote 0
                • undefined
                  dc42 administrators
                  last edited by 13 Feb 2020, 10:43

                  I suggest you wait for the Tool Board. They are currently going through testing and we will announce their availability any day now.

                  btw Hemeras are in short supply now, due to the issues in China.

                  Duet WiFi hardware designer and firmware engineer
                  Please do not ask me for Duet support via PM or email, use the forum
                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                  1 Reply Last reply Reply Quote 1
                  • undefined
                    mundsen
                    last edited by 13 Feb 2020, 11:05

                    ok, I`ll wait (my _Hemera is already installed 🙂 )

                    I`ll spend the time while waiting for the tool board to learn more about the rrf 3 firmware settings and get all my other functions correct

                    This is my first duet based printer project (RADDS/Repetier on my other projects) so a lot to learn - but I love that it is possible to edit the config files from the web server pages.. 🙂

                    If possible? you can add me to a pre order list for the Tool Board 🙂

                    1 Reply Last reply Reply Quote 0
                    • undefined
                      Danal
                      last edited by 13 Feb 2020, 12:34

                      @mundsen said in Duet 3 Tool Board - Available?:

                      I love that it is possible to edit the config files from the web server pages..

                      And if you have questions about how a given line really works, issue that command from the web console. They take effect in real time.

                      Delta / Kossel printer fanatic

                      1 Reply Last reply Reply Quote 1
                      • undefined
                        mundsen
                        last edited by 14 Feb 2020, 11:40

                        Miss one limit switch input - on many RailCore printers there is a limit switch (Y axis) installed together with the extruder..

                        undefined 1 Reply Last reply 14 Feb 2020, 12:23 Reply Quote 0
                        • undefined
                          dc42 administrators @mundsen
                          last edited by 14 Feb 2020, 12:23

                          @mundsen said in Duet 3 Tool Board - Available?:

                          Miss one limit switch input - on many RailCore printers there is a limit switch (Y axis) installed together with the extruder..

                          You could use the filament monitor input or the Z probe input for that, unless you already need both. Possibly also the second thermistor input.

                          Duet WiFi hardware designer and firmware engineer
                          Please do not ask me for Duet support via PM or email, use the forum
                          http://www.escher3d.com, https://miscsolutions.wordpress.com

                          1 Reply Last reply Reply Quote 1
                          • ?
                            A Former User
                            last edited by 15 Feb 2020, 11:28

                            Hi Guys

                            @dc42

                            I am eagerly awaiting for the tool board to be released. In the mean time.

                            I see the tool board is supporting 12v fans, for those of us who exclusively run everything at 24v, will the tool board be able accept 24v fans to save mixing and matching fan voltages ?

                            undefined 1 Reply Last reply 15 Feb 2020, 12:19 Reply Quote 1
                            • undefined
                              dc42 administrators @A Former User
                              last edited by 15 Feb 2020, 12:19

                              @CaLviNx said in Duet 3 Tool Board - Available?:

                              I see the tool board is supporting 12v fans, for those of us who exclusively run everything at 24v, will the tool board be able accept 24v fans to save mixing and matching fan voltages ?

                              The tool board supports 12V fans only. Note, 24V fans with PWM and tacho support are not generally available.

                              Duet WiFi hardware designer and firmware engineer
                              Please do not ask me for Duet support via PM or email, use the forum
                              http://www.escher3d.com, https://miscsolutions.wordpress.com

                              1 Reply Last reply Reply Quote 0
                              • undefined
                                mundsen
                                last edited by 15 Feb 2020, 23:38

                                Is it possible to get a 3d model? I want to design a housing for it for my printer - if not, the height of the largest component on the board?

                                Am I going to get heat problems if i install it in a small enclosure?

                                1 Reply Last reply Reply Quote 0
                                • undefined
                                  dc42 administrators
                                  last edited by 16 Feb 2020, 09:03

                                  No 3D model yet, but the dimensions are at https://duet3d.dozuki.com/Wiki/Duet_3_Tool_Board. The highest components are the terminal blocks, which are just under 9mm high. When the JST VH power lead is connected, the top of the latch is about 10mm above the top surface of the PCB.

                                  The PCB is 1.6mm thick and you should allow 3mm below it to clear the soldered joints.

                                  Duet WiFi hardware designer and firmware engineer
                                  Please do not ask me for Duet support via PM or email, use the forum
                                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                                  1 Reply Last reply Reply Quote 0
                                  • undefined
                                    mundsen
                                    last edited by 16 Feb 2020, 09:55

                                    ToolBoard v2.png

                                    Designing in Fusion360 - made a simple toolboard template. Next I have to make the holes in the top cover.

                                    1 Reply Last reply Reply Quote 0
                                    • ?
                                      A Former User
                                      last edited by 16 Feb 2020, 16:06

                                      @dc42

                                      Any update on the release of the tool board ?

                                      undefined 1 Reply Last reply 16 Feb 2020, 17:15 Reply Quote 0
                                      • undefined
                                        dc42 administrators @A Former User
                                        last edited by dc42 16 Feb 2020, 17:15

                                        @CaLviNx said in Duet 3 Tool Board - Available?:

                                        @dc42

                                        Any update on the release of the tool board ?

                                        Tony will list them on the Duet3D shop soon. We expect to start shipping them this coming week.

                                        Duet WiFi hardware designer and firmware engineer
                                        Please do not ask me for Duet support via PM or email, use the forum
                                        http://www.escher3d.com, https://miscsolutions.wordpress.com

                                        undefined 1 Reply Last reply 16 Feb 2020, 17:16 Reply Quote 1
                                        • undefined
                                          mundsen @dc42
                                          last edited by 16 Feb 2020, 17:16

                                          @dc42 do you have the part name/number for the screw terminal used? So I can ask them to my 3d model

                                          undefined 1 Reply Last reply 16 Feb 2020, 17:18 Reply Quote 0
                                          • First post
                                            Last post
                                          Unless otherwise noted, all forum content is licensed under CC-BY-SA