@T3P3Tony so the first Duet 3 are fine ? Exited

Designed and printed mount for the tool board on my core xy - wireing next!

The new home for my Duet 3 + rpi4 + 7" LCD (design in progress)

First initial test

Duet 3 6HC
Raspberry Pi 4 2GB
7 inch 1024x600 capacitive touch LCD
24V PSU
SD card that came with the Duet

All seems to work fine
Next, I`ll connect steppers, fans, configure WiFi/Ethernet..

I got a question about duet 3 and pi - is the code transfered to the duet before the print Job starts or is it controlled real time by the pi during the print?

Hi

Is it possible to mod this controller to get the same 5V PWM out as on the final 6HC controller?

When do you plan to release RC4?

Designed and printed mount for the tool board on my core xy - wireing next!

Is something like this an alternative?

https://www.aliexpress.com/item/32819201617.html?spm=a2g0o.productlist.0.0.6c4e22d80MuYak&algo_pvid=ad45ae30-2fb9-4f57-950c-7ce82b598ece&algo_expid=ad45ae30-2fb9-4f57-950c-7ce82b598ece-0&btsid=0ab50f6115832276850845160e3dd3&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

My toolboard is on it`s way

Is the software ready for it?

My config:
e3d hemera 24V, but with 12V cooling fan
12V filament cooling fan
BLTouch probe

https://forum.lightburnsoftware.com/t/duet-controller-support/11976

Not full RRFW support yet? or is there news in the rrfw 3 that make it work with LightBurn?

@dc42 reat So I can run my Duet 2 WiFi with the latest RRFW 3 in combination with LightBurn ?

I have a 5V PWM laser and plan to use one of the pwm outputs on the Duet 2 extension board

I`m working on a laser where I did plan to use a Duet 2 WiFi

Is there a software like LOightBurn that is compatible with RRFW today?
Or Should I start with an simple grbl controller and wait for RRFW support in LightBurn?

I have DM 856 drivers for the cnc buil!
FB_IMG_1582319371755.jpg

Hi

I have 3 project at the moment

1. A Railcore inspired printer running Duet 3
2. A small diode laser running duet 2 wifi
3. A CNC Where I did plan to use a Pokeys57CNC controller + Mach4

My question is - should I use Duet 2/3 on my CNC?

What software?