Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    No output from G32 on DSF 1.2.4 / DWC 2.07

    Scheduled Pinned Locked Moved
    Duet Web Control
    14
    64
    3.3k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Luke'sLaboratoryundefined
      Luke'sLaboratory
      last edited by

      Actually, I'll pile in here -

      I went and checked mine and yep, I'm not getting console readouts for G32 NOR something like a G30 S-1. Anything that's supposed to use the built-in echo just doesn't work. I didn't notice because it physically works, which is all I noticed.

      RC1 with DSF1.2.4 and DWC2.0.7, Duet 3 with PI.

      Luke
      http://lukeslab.online

      1 Reply Last reply Reply Quote 0
      • blt3dpundefined
        blt3dp
        last edited by

        I wanna say that I first installed my Duet 3, upgraded to RRF 3 stable and all the packages that go with it that I didn’t see the G32 response. There was an update somewhere in between there and now that I was getting it but when DWC 2.0.7 came out and I upgraded all packages, the G32 responses stopped.

        My 3D Printing YouTube Channel
        Better Living Through 3D Printing

        Follow me on Instagram and Twitter
        Instagram
        Twitter

        1 Reply Last reply Reply Quote 0
        • Danalundefined
          Danal
          last edited by

          After an apt-get sequence, I still get it just fine.

          Duet Web Control 2.0.7
          Board: Duet 3 MB6HC (MB6HC)
          DSF Version: 1.2.4.0
          Firmware: RepRapFirmware for Duet 3 MB6HC v0.6 or 1.0 3.0 (2020-01-03b3)

          Chrome browser, if that makes any difference.

          2/15/2020, 7:14:53 PM G32
          Leadscrew adjustments made: 0.118 0.120 0.109, points used 3, deviation before 0.115 after 0.000

          Delta / Kossel printer fanatic

          Danalundefined 1 Reply Last reply Reply Quote 0
          • kraegarundefined
            kraegar
            last edited by

            Tried in chrome just to verify (I usually use Firefox)

            33c932c4-a315-4b0e-b521-f69b4ccc57ac-image.png

            Co-Creator of the RailcoreII CoreXY printer
            https://www.thingiverse.com/thing:2407174

            1 Reply Last reply Reply Quote 0
            • Danalundefined
              Danal
              last edited by

              What is in your bed.g?

              Delta / Kossel printer fanatic

              mvieleersundefined 1 Reply Last reply Reply Quote 0
              • mvieleersundefined
                mvieleers @Danal
                last edited by

                @Danal
                ; bed.g
                ; called to perform automatic bed compensation via G32
                ;
                ; generated by RepRapFirmware Configuration Tool v2.1.8 on Thu Jan 23 2020 14:06:49 GMT+0100 (Midden-Europese standaardtijd)

                M561 ; clear any existing bed transform
                G1 Z5 H2 ; move nozzle up
                ;4-point bed levelling
                G30 P0 X15 Y45 Z-99999
                G30 P1 X15 Y275 Z-99999
                G30 P2 X275 Y275 Z-99999
                G30 P3 X275 Y45 Z-99999 S3
                G1 X0 Y0 F5000 ; move the head to the corner (optional)

                1 Reply Last reply Reply Quote 0
                • Danalundefined
                  Danal
                  last edited by

                  Hmmm... I'm really stumped. I don't see any differences that would make a difference, and I'm getting it consistently.

                  Delta / Kossel printer fanatic

                  1 Reply Last reply Reply Quote 0
                  • Danalundefined
                    Danal
                    last edited by

                    SSH into your Pi, and try the following (while you run a G32):

                    • sudo journalctl -fu duetcontrolserver

                    If that doesn't show anything relevant, then:

                    • sudo journalctl -fu duetwebserver

                    There will (should) be a lot more output on the webserver, and again, it is up to our eyeballs to see if anything is relevant.

                    Delta / Kossel printer fanatic

                    mvieleersundefined 1 Reply Last reply Reply Quote 0
                    • chas2706undefined
                      chas2706
                      last edited by

                      Hi, I mentioned in another post that since upgrading to RRF3.01_RC1 I too do not get any output from G32. I have Duet3 with raspberry pi.

                      1 Reply Last reply Reply Quote 0
                      • chas2706undefined
                        chas2706
                        last edited by

                        @Danal said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                        sudo journalctl -fu duetcontrolserver

                        This is my output from the above command:

                        Feb 17 10:50:26 Duet3 DuetControlServer[345]: [info] Executing nested macro file Leadscrew_Levelling.g on channel HTTP
                        Feb 17 10:50:26 Duet3 DuetControlServer[345]: [info] Executing nested macro file bed.g on channel HTTP
                        Feb 17 10:50:26 Duet3 DuetControlServer[345]: [info] Executing nested macro file homeall.g on channel HTTP
                        Feb 17 10:50:35 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file deployprobe.g not found
                        Feb 17 10:50:52 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file retractprobe.g not found
                        Feb 17 10:50:52 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file deployprobe.g not found
                        Feb 17 10:51:02 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file retractprobe.g not found
                        Feb 17 10:51:02 Duet3 DuetControlServer[345]: [info] HTTP: Finished macro file homeall.g
                        Feb 17 10:51:02 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file deployprobe.g not found
                        Feb 17 10:51:13 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file retractprobe.g not found
                        Feb 17 10:51:13 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file deployprobe.g not found
                        Feb 17 10:51:26 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file retractprobe.g not found
                        Feb 17 10:51:30 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file deployprobe.g not found
                        Feb 17 10:51:38 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file retractprobe.g not found
                        Feb 17 10:51:38 Duet3 DuetControlServer[345]: [info] HTTP: Finished macro file bed.g
                        Feb 17 10:51:39 Duet3 DuetControlServer[345]: [info] HTTP: Finished macro file Leadscrew_Levelling.g

                        and with sudo lournalctl -fu duetwebserver I get:

                        Feb 17 10:54:24 Duet3 DuetWebServer[463]: [DoCode] Executing code 'M98 P"0:/macros/Bed Levelling/Leadscrew_Levelling.g"'
                        Feb 17 10:55:33 Duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Mvc.Infrastructure.ContentResultExecutor[1]
                        Feb 17 10:55:33 Duet3 DuetWebServer[463]: Executing ContentResult with HTTP Response ContentType of text/plain; charset=utf-8
                        Feb 17 10:55:33 Duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker[2]
                        Feb 17 10:55:33 Duet3 DuetWebServer[463]: Executed action DuetWebServer.Controllers.MachineController.DoCode (DuetWebServer) in 69796.3473ms
                        Feb 17 10:55:33 Duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Routing.EndpointMiddleware[1]
                        Feb 17 10:55:33 Duet3 DuetWebServer[463]: Executed endpoint 'DuetWebServer.Controllers.MachineController.DoCode (DuetWebServer)'
                        Feb 17 10:55:33 Duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Hosting.Diagnostics[2]
                        Feb 17 10:55:33 Duet3 DuetWebServer[463]: Request finished in 69805.2756ms 200 text/plain; charset=utf-8

                        With both examples I notice the Pi does not return to "pi@Duet3:~ $ " is this something to do with the problem?

                        1 Reply Last reply Reply Quote 0
                        • oliofundefined
                          oliof
                          last edited by

                          @chas2706 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                          With both examples I notice the Pi does not return to "pi@Duet3:~ $ " is this something to do with the problem?

                          That is due to the -f switch which means follow and waits for new stuff to be written to the journal. Not returning to the command prompt without hitting Ctrl-C is normal in this case.

                          <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

                          1 Reply Last reply Reply Quote 0
                          • chas2706undefined
                            chas2706
                            last edited by

                            @oliof said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                            With both examples I notice the Pi does not return to "pi@Duet3:~ $ " is this something to do with the problem?

                            That is due to the -f switch which means follow and waits for new stuff to be written to the journal. Not returning to the command prompt without hitting Ctrl-C is normal in this case.

                            Ok thanks I see.
                            I don't know what the problem is then. I just get no output from the console at all.

                            1 Reply Last reply Reply Quote 0
                            • chas2706undefined
                              chas2706
                              last edited by

                              @chas2706 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                              Hi, I mentioned in another post that since upgrading to RRF3.01_RC1 I too do not get any output from G32. I have Duet3 with raspberry pi.

                              @dc42 Do you have any suggestions.
                              Also I noticed that when I enter any command in the console it does not work first time I have to enter twice! I am running RRF3.0.2_RC1 DWC2.0.7 DSF1.2.4.0 on Duet 3 board with SBC.

                              dc42undefined 1 Reply Last reply Reply Quote 0
                              • Danalundefined
                                Danal
                                last edited by

                                Yeah, I don't see anything in those logs that looks wrong.

                                I am well and truly stumped. The "must send twice" is equally weird.

                                Delta / Kossel printer fanatic

                                1 Reply Last reply Reply Quote 0
                                • chas2706undefined
                                  chas2706
                                  last edited by

                                  @Danal said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                                  Yeah, I don't see anything in those logs that looks wrong.

                                  Yes it is both weird and annoying.
                                  The bed levelling must be working because my prints are still good but its not right that you get no feedback.
                                  Do you think that the two issues may be linked?
                                  i.e. there's no bed deviation result because it was only reported once?

                                  1 Reply Last reply Reply Quote 0
                                  • dc42undefined
                                    dc42 administrators @chas2706
                                    last edited by

                                    @chas2706 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                                    @chas2706 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                                    Hi, I mentioned in another post that since upgrading to RRF3.01_RC1 I too do not get any output from G32. I have Duet3 with raspberry pi.

                                    @dc42 Do you have any suggestions.
                                    Also I noticed that when I enter any command in the console it does not work first time I have to enter twice! I am running RRF3.0.2_RC1 DWC2.0.7 DSF1.2.4.0 on Duet 3 board with SBC.

                                    One for @chrishamm I think, because in standalone mode I don't see any of these issues, and neither have I seen any reports of them. So I suspect it is a DSF issue, or a DSF/RRF interaction.

                                    Duet WiFi hardware designer and firmware engineer
                                    Please do not ask me for Duet support via PM or email, use the forum
                                    http://www.escher3d.com, https://miscsolutions.wordpress.com

                                    1 Reply Last reply Reply Quote 0
                                    • chas2706undefined
                                      chas2706
                                      last edited by

                                      @dc42 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                                      One for @chrishamm I think, because in standalone mode I don't see any of these issues, and neither have I seen any reports of them. So I suspect it is a DSF issue, or a DSF/RRF interaction.

                                      dc42 How do I roll back to Duet Software Framework 1.2.3.0 so I can go back to RRF3.0.1_beta2 and DWC2.06 because it was definitely working on that firmware setup.

                                      Danalundefined 1 Reply Last reply Reply Quote 0
                                      • richardmckennaundefined
                                        richardmckenna
                                        last edited by

                                        I’m not seeing any output from G32 either.

                                        Duet3+Pi 3B+
                                        Duet Web Control: 2.0.7
                                        Board: Duet 3 MB6HC (MB6HC)
                                        DSF Version: 1.2.4.0
                                        Firmware: RepRapFirmware for Duet 3 MB6HC v0.6 or 1.0 3.0 (2020-01-03b3)

                                        1 Reply Last reply Reply Quote 0
                                        • Danalundefined
                                          Danal @chas2706
                                          last edited by

                                          @chas2706 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                                          @dc42 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                                          One for @chrishamm I think, because in standalone mode I don't see any of these issues, and neither have I seen any reports of them. So I suspect it is a DSF issue, or a DSF/RRF interaction.

                                          dc42 How do I roll back to Duet Software Framework 1.2.3.0 so I can go back to RRF3.0.1_beta2 and DWC2.06 because it was definitely working on that firmware setup.

                                          sudo apt-get install duetsoftwareframework=1.2.3.0

                                          Delta / Kossel printer fanatic

                                          1 Reply Last reply Reply Quote 0
                                          • chas2706undefined
                                            chas2706
                                            last edited by

                                            @Danal said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                                            sudo apt-get install duetsoftwareframework=1.2.3.0

                                            Thanks for that.

                                            mvieleersundefined 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA