Fusion 360 FDM/FFF Slicing

gtj0

@littlehobbyshop said in Fusion 360 FDM/FFF Slicing:

UPDATE 12/03/2020

Wait, IT'S DECEMBER ALREADY???

jens55

I have never been able to understand why there are two different notations for dates.
Personally I think it should be 2020/3/12

gtj0

Full ISO please... 2020-03-12T16:47:31-06:00

jens55

My bad
Apologies all around!

bot

We should just count milliseconds since the big bang if we wanna get precise.

jens55

Would we be able to do that with 64 bits or do we need to go with 128 bits instead ?

Maybe we should all standardize on the 'Stardate' system ?

DaBit

Someone stretching his neck to create an optimal RRF post for F360, and you guys start a date notation discussion?

bot

@DaBit said in Fusion 360 FDM/FFF Slicing:

Someone stretching his neck to create an optimal RRF post for F360, and you guys start a date notation discussion?

We paid the man his upvotes, let us have some fun.

DaBit

OK, granted

gtj0

Tom just did a video on Fusion 360 Slicing...
https://www.youtube.com/watch?v=J_0lLZg4JkY

A Former User

@gtj0 said in Fusion 360 FDM/FFF Slicing:

Tom just did a video on Fusion 360 Slicing...
https://www.youtube.com/watch?v=J_0lLZg4JkY&t=338s

time code to the middle deliberate? (the &t=338s bit)

gtj0

@bearer said in Fusion 360 FDM/FFF Slicing:

@gtj0 said in Fusion 360 FDM/FFF Slicing:

Tom just did a video on Fusion 360 Slicing...
https://www.youtube.com/watch?v=J_0lLZg4JkY&t=338s

time code to the middle deliberate?

Hah. No. I started watching on my phone then switched to a browser. I'll edit.

gtj0

Looks like Joel did one as well...
https://www.youtube.com/watch?v=QWFRh-MdKxo

dc42

@gtj0 said in Fusion 360 FDM/FFF Slicing:

Nice!

For best compatibility, you might want to add H1 to the M0 to keep the heaters on. This way cancel.g or stop.g can decide whether to turn them off or not.

Not necessary, the heaters are only turned off if the stop.g or cancel.g file is not found. I may remove the H1 option in a future release.

littlehobbyshop

Update 26/06/2020

Added a fan speed property. Fusion currently only presents a setting to disable the fan for the first few layers, for the rest the fan will run at 100%. This setting lets you change that value.

https://github.com/LittleHobbyShop/RRFPostProcessor

Stu3Dent

@littlehobbyshop thanks for the update