Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    No output from G32 on DSF 1.2.4 / DWC 2.07

    Scheduled Pinned Locked Moved
    Duet Web Control
    14
    64
    3.3k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • mvieleersundefined
      mvieleers @Danal
      last edited by

      @Danal Just to be sure: this is my bed.g logs for completeness. Don't believe there's much to go on in there. (by the way, I had upgraded to 3.01-RC2 before.)
      duetcontrolserver:
      Feb 18 20:30:45 duet3 DuetControlServer[352]: [info] Executing nested macro file bed.g on channel HTTP
      Feb 18 20:30:46 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
      Feb 18 20:30:53 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
      Feb 18 20:30:53 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
      Feb 18 20:30:54 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
      Feb 18 20:30:54 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
      Feb 18 20:31:01 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
      Feb 18 20:31:01 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
      Feb 18 20:31:02 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
      Feb 18 20:31:02 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
      Feb 18 20:31:02 duet3 DuetControlServer[352]: [info] HTTP: Finished macro file retractprobe.g
      Feb 18 20:31:04 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
      Feb 18 20:31:11 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
      Feb 18 20:31:11 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
      Feb 18 20:31:12 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
      Feb 18 20:31:12 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
      Feb 18 20:31:19 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
      Feb 18 20:31:19 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
      Feb 18 20:31:20 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
      Feb 18 20:31:20 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
      Feb 18 20:31:20 duet3 DuetControlServer[352]: [info] HTTP: Finished macro file retractprobe.g
      Feb 18 20:31:23 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
      Feb 18 20:31:30 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
      Feb 18 20:31:30 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
      Feb 18 20:31:31 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
      Feb 18 20:31:31 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
      Feb 18 20:31:38 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
      Feb 18 20:31:38 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
      Feb 18 20:31:39 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
      Feb 18 20:31:39 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
      Feb 18 20:31:39 duet3 DuetControlServer[352]: [info] HTTP: Finished macro file retractprobe.g
      Feb 18 20:31:42 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
      Feb 18 20:31:49 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
      Feb 18 20:31:49 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
      Feb 18 20:31:50 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
      Feb 18 20:31:50 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
      Feb 18 20:31:57 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
      Feb 18 20:31:57 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
      Feb 18 20:31:58 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
      Feb 18 20:31:58 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
      Feb 18 20:31:58 duet3 DuetControlServer[352]: [info] HTTP: Finished macro file retractprobe.g
      Feb 18 20:31:58 duet3 DuetControlServer[352]: [info] HTTP: Finished macro file bed.g

      duetwebserver:
      Feb 18 20:30:44 duet3 DuetWebServer[463]: info: DuetWebServer.Controllers.MachineController[0]
      Feb 18 20:30:44 duet3 DuetWebServer[463]: [DoCode] Executing code 'G32'
      Feb 18 20:31:58 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Mvc.Infrastructure.ContentResultExecutor[1]
      Feb 18 20:31:58 duet3 DuetWebServer[463]: Executing ContentResult with HTTP Response ContentType of text/plain; charset=utf-8
      Feb 18 20:31:58 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker[2]
      Feb 18 20:31:58 duet3 DuetWebServer[463]: Executed action DuetWebServer.Controllers.MachineController.DoCode (DuetWebServer) in 73655.5472ms
      Feb 18 20:31:58 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Routing.EndpointMiddleware[1]
      Feb 18 20:31:58 duet3 DuetWebServer[463]: Executed endpoint 'DuetWebServer.Controllers.MachineController.DoCode (DuetWebServer)'
      Feb 18 20:31:58 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Hosting.Diagnostics[2]
      Feb 18 20:31:58 duet3 DuetWebServer[463]: Request finished in 73656.4125ms 200 text/plain; charset=utf-8
      Feb 18 20:33:05 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Hosting.Diagnostics[1]
      Feb 18 20:33:05 duet3 DuetWebServer[463]: Request starting HTTP/1.1 POST http://duet3.local/machine/code text/plain;charset=UTF-8 3
      Feb 18 20:33:05 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Cors.Infrastructure.CorsService[4]
      Feb 18 20:33:05 duet3 DuetWebServer[463]: CORS policy execution successful.
      Feb 18 20:33:05 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Routing.EndpointMiddleware[0]
      Feb 18 20:33:05 duet3 DuetWebServer[463]: Executing endpoint 'DuetWebServer.Controllers.MachineController.DoCode (DuetWebServer)'
      Feb 18 20:33:05 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker[3]
      Feb 18 20:33:05 duet3 DuetWebServer[463]: Route matched with {action = "DoCode", controller = "Machine"}. Executing controller action with signature System.Threading.Tasks.Task`1[Microsoft.AspNetCore.Mvc.IActionResult] DoCode() on controller DuetWebServer.Controllers.MachineController (DuetWebServer).
      Feb 18 20:33:05 duet3 DuetWebServer[463]: info: DuetWebServer.Controllers.MachineController[0]
      Feb 18 20:33:05 duet3 DuetWebServer[463]: [DoCode] Executing code 'G32'
      Feb 18 20:34:19 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Mvc.Infrastructure.ContentResultExecutor[1]
      Feb 18 20:34:19 duet3 DuetWebServer[463]: Executing ContentResult with HTTP Response ContentType of text/plain; charset=utf-8
      Feb 18 20:34:19 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker[2]
      Feb 18 20:34:19 duet3 DuetWebServer[463]: Executed action DuetWebServer.Controllers.MachineController.DoCode (DuetWebServer) in 73870.6134ms
      Feb 18 20:34:19 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Routing.EndpointMiddleware[1]
      Feb 18 20:34:19 duet3 DuetWebServer[463]: Executed endpoint 'DuetWebServer.Controllers.MachineController.DoCode (DuetWebServer)'
      Feb 18 20:34:19 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Hosting.Diagnostics[2]
      Feb 18 20:34:19 duet3 DuetWebServer[463]: Request finished in 73872.5775ms 200 text/plain; charset=utf-8

      1 Reply Last reply Reply Quote 0
      • mvieleersundefined
        mvieleers @chas2706
        last edited by

        @chas2706 Please note, to make this work, you cannot be on a release of Reprapfirmware that requires DSF 1.2.4.

        1 Reply Last reply Reply Quote 0
        • gtj0undefined
          gtj0
          last edited by

          There are issues with the latest DSF and getting responses sent to the correct (or any) location. For instance, if I run G32 in one instance of the UI the response used to show up on all instances connected but now it seems to show up only on the one that issued the command (but not always even there).

          I started looking in the source for the issue to see if I can fix it myself but haven't really had time to dig into it as deep seems to be needed.

          1 Reply Last reply Reply Quote 0
          • Danalundefined
            Danal @Danal
            last edited by

            @Danal said in No output from G32 on DSF 1.2.4 / DWC 2.07:

            After an apt-get sequence, I still get it just fine.
            Duet Web Control 2.0.7
            Board: Duet 3 MB6HC (MB6HC)
            DSF Version: 1.2.4.0
            Firmware: RepRapFirmware for Duet 3 MB6HC v0.6 or 1.0 3.0 (2020-01-03b3)
            Chrome browser, if that makes any difference.
            2/15/2020, 7:14:53 PM G32
            Leadscrew adjustments made: 0.118 0.120 0.109, points used 3, deviation before 0.115 after 0.000

            Ok, this is weird. Right in the middle of working on some other things, I stopped getting responses to G32.

            I had them earlier. I ran three G32 and watched the actual result get better and better. Later in the evening, suddenly, no output. Between those two, several e-stops (I'm working on probes that jam). Pi was up all the time.
            Certainly no release changes, etc.

            So far, I haven't been able to get it back.

            • Reboot of Pi, still no output.
            • E-Stop of firmware, still no output.
            • Power Cycle, still no output.

            That last one baffles me to no end. Power cycle?

            Delta / Kossel printer fanatic

            mvieleersundefined 1 Reply Last reply Reply Quote 0
            • mvieleersundefined
              mvieleers @Danal
              last edited by

              @Danal Well that's strange behaviour. I'm losing the console output immediately, as soon as DSF 1.2.4.0 is installed.
              I really am confident it is the DSF, as I am now running on standalone mode with same firmware and same DWC version without issues.

              Hopefully @chrishamm will get around to looking into this.

              1 Reply Last reply Reply Quote 0
              • stonewaterundefined
                stonewater
                last edited by

                I'm glad it's not just me. This started as soon as I moved to Duet 3 h/w. If I press the level button on the panel due - then I get the expected output in both console and web interface via the pop up.

                If I run G32 via the web console then the printer does run the macro as expected but I don't get any output.

                Did anyone find a solution to this?

                1 Reply Last reply Reply Quote 0
                • chas2706undefined
                  chas2706
                  last edited by

                  @chas2706 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                  @Danal said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                  Yeah, I don't see anything in those logs that looks wrong.

                  Yes it is both weird and annoying.
                  The bed levelling must be working because my prints are still good but its not right that you get no feedback.
                  Do you think that the two issues may be linked?
                  i.e. there's no bed deviation result because it was only reported once?

                  I am still experiencing these problems on the latest build.
                  The G32 reporting mostly does not work although on odd rare occasions it does! and the fact that I still have to enter gcode commands twice in the console before they work is really annoying.

                  1 Reply Last reply Reply Quote 0
                  • dc42undefined
                    dc42 administrators
                    last edited by

                    As a temporary workaround until this is fixed, you can display the G32 deviation by running M409 K"move.calibration". tested using RRF 3.01-RC4 (recommended DSF version for this release is 1.2.5).

                    Duet WiFi hardware designer and firmware engineer
                    Please do not ask me for Duet support via PM or email, use the forum
                    http://www.escher3d.com, https://miscsolutions.wordpress.com

                    1 Reply Last reply Reply Quote 1
                    • chas2706undefined
                      chas2706
                      last edited by

                      @dc42 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                      As a temporary workaround until this is fixed, you can display the G32 deviation by running M409 K"move.calibration". tested using RRF 3.01-RC4 (recommended DSF version for this release is 1.2.5).

                      Ok thanks for that.

                      1 Reply Last reply Reply Quote 0
                      • richardmckennaundefined
                        richardmckenna
                        last edited by

                        Has development stopped on DSF? Not seen any commits on the repo since January. Is @chrishamm ok?

                        Danalundefined 1 Reply Last reply Reply Quote 0
                        • Danalundefined
                          Danal @richardmckenna
                          last edited by Danal

                          @richardmckenna said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                          Has development stopped on DSF? Not seen any commits on the repo since January. Is @chrishamm ok?

                          The Dev branch of https://github.com/chrishamm/DuetSoftwareFramework contains commits by chrishamm made 7 days ago. They were not packaged into a release on github; however, they do seem to have been used to build the 1.2.5 DSF release that is currently on the package server.

                          So he is around somewhere.

                          At the same time, may I make a plea for Duet to be more transparent about the roadmap? DC42 is doing an excellent job of communicating "next steps" for the firmware on the boards. However, the D3+Pi roadmap still seems vague.

                          Delta / Kossel printer fanatic

                          1 Reply Last reply Reply Quote 2
                          • chrishammundefined
                            chrishamm administrators
                            last edited by

                            Hi everyone, I am sorry for being unavailable for so long. Primarily this is because I've been designing a new machine which will be based on the Duet 3. That will allow me to replicate different operation modes and to replicate certain configurations and/or issues that have been very tricky to test.

                            As you may suspect I have prepared a new DWC version, which adopts David's new object model from RRF and likewise DSF has been improved, too. I'll release a new DSF version later this week which will also feature conditional G-code. Once these new versions are out, I'll be happy to provide support again.

                            Again, sorry for the inconvenience!

                            Duet software engineer

                            Danalundefined mvieleersundefined 3 Replies Last reply Reply Quote 3
                            • Danalundefined
                              Danal @chrishamm
                              last edited by

                              @chrishamm said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                              Hi everyone, I am sorry for being unavailable for so long. Primarily this is because I've been designing a new machine which will be based on the Duet 3. That will allow me to replicate different operation modes and to replicate certain configurations and/or issues that have been very tricky to test.

                              As you may suspect I have prepared a new DWC version, which adopts David's new object model from RRF and likewise DSF has been improved, too. I'll release a new DSF version later this week which will also feature conditional G-code. Once these new versions are out, I'll be happy to provide support again.

                              Again, sorry for the inconvenience!

                              We are just very glad to hear that you are OK, and very glad to have you back!

                              Delta / Kossel printer fanatic

                              1 Reply Last reply Reply Quote 1
                              • mvieleersundefined
                                mvieleers @chrishamm
                                last edited by

                                @chrishamm said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                                Again, sorry for the inconvenience!

                                No worries! I (and probably most others) understand that this is not your day job. Appreciate everything you're doing.

                                Looking forward to try the new release, when it's available.

                                1 Reply Last reply Reply Quote 0
                                • chas2706undefined
                                  chas2706
                                  last edited by

                                  @Danal said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                                  As you may suspect I have prepared a new DWC version, which adopts David's new object model from RRF and likewise DSF has been improved, too. I'll release a new DSF version later this week which will also feature conditional G-code. Once these new versions are out, I'll be happy to provide support again.

                                  Where is it then?

                                  A Former User? 1 Reply Last reply Reply Quote 0
                                  • A Former User?
                                    A Former User @chas2706
                                    last edited by

                                    @chas2706 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                                    Where is it then?

                                    you can track the development on github while waiting for the packages to show up in the feed for apt.

                                    https://github.com/chrishamm/DuetSoftwareFramework/commits/dev

                                    1 Reply Last reply Reply Quote 0
                                    • mvieleersundefined
                                      mvieleers @chrishamm
                                      last edited by mvieleers

                                      @chrishamm Thanks a lot for the hard work. Installed DSF 1.3.0 and DWC 2.1.0 and RRF3.01-RC6. This issue with no output on the G32 command still persists, unfortunately.

                                      chrishammundefined 1 Reply Last reply Reply Quote 0
                                      • chrishammundefined
                                        chrishamm administrators @mvieleers
                                        last edited by

                                        @mvieleers Thanks for letting me know, I'll have a look.

                                        Duet software engineer

                                        mvieleersundefined 1 Reply Last reply Reply Quote 0
                                        • mvieleersundefined
                                          mvieleers @chrishamm
                                          last edited by

                                          @chrishamm Brilliant. Quick question, sorry to polute this topic, but were you able to implement conditional gcode in this version of dsf?

                                          1 Reply Last reply Reply Quote 0
                                          • PaulHewundefined
                                            PaulHew
                                            last edited by

                                            Just updated to 2.1.0. Think I have found an issue.
                                            I cannot load my Height Map.
                                            I have check the file is there and there are numbers in it but it tells me height map not available.

                                            Have rebooted my Maestro and it still is not displaying.

                                            Regards,

                                            Paul

                                            RailCore II - Duet Mini + 1LC, Voron V0.1 - Duet Mini
                                            Voron 2.4 disassembled..... Waiting for the RailCore Mini....

                                            chrishammundefined 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA