Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Cambio elettronica

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    9
    124
    6.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Danalundefined
      Danal
      last edited by

      Good afternoon everybody.
      After two years of absence and inactivity I decided to return.
      Some time ago I purchased the X5SA PRO printer from Tronxy which mounts a 24v electronic "CXY-V8-190729" with self leveling.
      The mechanics is a Corexy with industrial linear guides.
      The Firmware is of the chitu adapted to the tronxy and therefore cannot be modified.
      Four days ago the electronics got stuck in the sense that it no longer accepted the commands, so I decided
      to change the card with the duet2 wifi that I already had and mounted on another Cartesian printer with plastic frame "I3 Pro B from geeetech"
      Since the original i3 pro b printer was 12v then added a 24v power supply and mounted the duet2 wifi card.
      After looking and looking at the wiring, I decided to change the card, so far so good.
      Yesterday I turn on the printer with the new card, fantastic it turned on without any problem
      Now there are the configuration problems, having read several treed translated into Italian "I don't know English 😥" and with various confusion because it is not that the translation makes it clear what the interlocutor writes. So I decided to join here and help out all of you as best I can by describing what I did and how I did it.

      Let's start with order:

      Firmware to be updated
      controlweb to update
      Z probe model (XY-08N NPN NO - DC6-36v 3 wires + / - / S)
      Point 1: I updated the firmware from 2.05 to version 3 but it was not successful, that is, after updating it it always gave me the FW 2.05 so from webcontrol I deleted the FW 2.05 from the SD card and reinstalled the 3.0 now works, here of then I put the log.
      console.txt

      Point 2: no problem here, I uploaded via webcontrol in "system / upload system files" once uploaded the file asks you to reset everything, gives the ok and everything is done.

      As for point 1, someone found problems with the "2000 C" off-scale temperatures, I also had the same problem but solved it as described in point 1.

      Step 3: how to connect the probe z of the tronxy, I connected the positive and negative to the output of the fan always running having 24v as power supply therefore also the fans work at 24v, the signal cable I connected it with a diode to the Z_Probe_in, with a tester I checked the output voltage of the probe that gave me 0.650 v in active mode, so it seems to work well (BEWARE of the voltage being at 24v also the sensor output will have 24 but having put a diode will have 'a voltage drop when active, the sensor in question detects aluminum, iron, steel, but NOT glass.

      I hope I have been of help to all those who have purchased a tronxy x5sa pro and want to change electronics, I also hope to be in the right tread.

      Delta / Kossel printer fanatic

      1 Reply Last reply Reply Quote 0
      • Danalundefined
        Danal
        last edited by Danal

        @Leblond Grazie!

        Questo è molto utile

        Per favore, contribuisci di più, in qualsiasi momento.

        Delta / Kossel printer fanatic

        Leblondundefined 1 Reply Last reply Reply Quote 0
        • Leblondundefined
          Leblond @Danal
          last edited by

          @Danal said in Cambio elettronica:

          @Leblond Grazie!

          Questo è molto utile

          Per favore, contribuisci di più, in qualsiasi momento.

          ti ringario faro' il possibile

          1 Reply Last reply Reply Quote 0
          • droftartsundefined
            droftarts administrators @Leblond
            last edited by

            @Leblond Thanks for your report!

            Ian

            Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

            1 Reply Last reply Reply Quote 0
            • Leblondundefined
              Leblond
              last edited by

              Ragazzi una domanda, dato che devo vedere se i motori girino nel verso giusto mi chiedevo se esisteva un modo per bypassare l'home di tutti gli assi, non vorrei che andassero a sbattere o peggio ancora rovinarmi il piatto di stampa.

              droftartsundefined 1 Reply Last reply Reply Quote 0
              • droftartsundefined
                droftarts administrators @Leblond
                last edited by

                @Leblond Send M564 S0 H0 to allow moves without homing, and outside the limits of the print volume.

                Ian

                Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                1 Reply Last reply Reply Quote 0
                • Leblondundefined
                  Leblond
                  last edited by

                  @droftarts grazie

                  1 Reply Last reply Reply Quote 0
                  • Leblondundefined
                    Leblond
                    last edited by

                    @droftarts said in Cambio elettronica:

                    M564 S0 H0
                    ho lanciato il comando M564 S0 H0, poi G1 X50 F200 non funziona, quindi ho provato a mandare l'asse x in home, ma mi si e' alzato l'asse Z, forse qualcosina non quadra

                    droftartsundefined 1 Reply Last reply Reply Quote 0
                    • droftartsundefined
                      droftarts administrators @Leblond
                      last edited by

                      @Leblond It sounds like you have connected the stepper motors to the wrong pins! See the wiring diagram here for the motor connections: https://duet3d.dozuki.com/Wiki/Duet_Wiring_Diagrams

                      If your wiring is correct, post your config.g file. Also send M115 and post the response.

                      Ian

                      Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                      1 Reply Last reply Reply Quote 0
                      • Leblondundefined
                        Leblond
                        last edited by

                        0:/sys/config.g.bak
                        ; Configuration file for Duet WiFi (firmware version 3)
                        ; executed by the firmware on start-up
                        ;
                        ; generated by RepRapFirmware Configuration Tool v2.1.8 on Tue Mar 31 2020 13:40:08 GMT+0200 (Ora legale dell’Europa centrale)

                        ; General preferences
                        G90 ; send absolute coordinates...
                        M83 ; ...but relative extruder moves
                        M550 P"X5SA PRO" ; set printer name

                        M667 S1 ; select CoreXY mode

                        ; Network
                        M552 S1 ; enable network
                        M586 P0 S1 ; enable HTTP
                        M586 P1 S0 ; disable FTP
                        M586 P2 S0 ; disable Telnet

                        ; Drives
                        M569 P0 S1 ; physical drive 0 goes forwards
                        M569 P1 S0 ; physical drive 1 goes backwards
                        M569 P2 S0 ; physical drive 2 goes backwards
                        M569 P3 S0 ; physical drive 3 goes backwards
                        M584 X0 Y1 Z2 E3 ; set drive mapping
                        M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
                        M92 X80.00 Y80.00 Z4000.00 E420.00 ; set steps per mm
                        M566 X900.00 Y900.00 Z12.00 E120.00 ; set maximum instantaneous speed changes (mm/min)
                        M203 X6000.00 Y6000.00 Z180.00 E1200.00 ; set maximum speeds (mm/min)
                        M201 X500.00 Y500.00 Z20.00 E250.00 ; set accelerations (mm/s^2)
                        M906 X800 Y800 Z800 E800 I30 ; set motor currents (mA) and motor idle factor in per cent
                        M84 S30 ; Set idle timeout

                        ; Axis Limits
                        M208 X0 Y0 Z0 S1 ; set axis minima
                        M208 X330 Y330 Z400 S0 ; set axis maxima

                        ; Endstops
                        M574 X1 S1 P"xstop" ; configure active-high endstop for low end on X via pin xstop
                        M574 Y1 S1 P"ystop" ; configure active-high endstop for low end on Y via pin ystop
                        M574 Z1 S2 ; configure Z-probe endstop for low end on Z

                        ; Z-Probe
                        M558 P1 C"zprobe.in" H5 F120 T6000 ; set Z probe type to unmodulated and the dive height + speeds
                        G31 P500 X0 Y0 Z2.5 ; set Z probe trigger value, offset and trigger height
                        M557 X60:300 Y50:300 S20 ; define mesh grid

                        ; Heaters
                        M308 S0 P"bedtemp" Y"thermistor" T100000 B4138 ; configure sensor 0 as thermistor on pin bedtemp
                        M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0
                        M143 H0 S120 ; set temperature limit for heater 0 to 120C
                        M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit
                        M140 H0 ; map heated bed to heater 0
                        M308 S1 P"e0temp" Y"thermistor" T100000 B4138 ; configure sensor 1 as thermistor on pin e0temp
                        M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
                        M143 H1 S280 ; set temperature limit for heater 1 to 280C
                        M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit

                        ; Fans
                        M950 F0 C"fan0" Q500 ; create fan 0 on pin fan0 and set its frequency
                        M106 P0 S0 H-1 ; set fan 0 value. Thermostatic control is turned off
                        M950 F1 C"fan1" Q500 ; create fan 1 on pin fan1 and set its frequency
                        M106 P1 S1 H1 T45 ; set fan 1 value. Thermostatic control is turned on

                        ; Tools
                        M563 P0 D0 H1 F0 ; define tool 0
                        G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
                        G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C

                        ; Custom settings are not defined

                        ; Miscellaneous
                        M911 S22 R23 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set voltage thresholds and actions to run on power loss

                        droftartsundefined 2 Replies Last reply Reply Quote 0
                        • droftartsundefined
                          droftarts administrators @Leblond
                          last edited by

                          @Leblond said in Cambio elettronica:

                          config.g.bak

                          That's the backup file. Post 'config.g'.

                          Ian

                          Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                          1 Reply Last reply Reply Quote 0
                          • droftartsundefined
                            droftarts administrators @Leblond
                            last edited by

                            @Leblond said in Cambio elettronica:

                            M584 X0 Y1 Z2 E3

                            That looks okay. Note that the order of the driver pins on the board, from left to right, is E1, E0, X, Y, Z.

                            Ian

                            Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                            1 Reply Last reply Reply Quote 0
                            • Leblondundefined
                              Leblond
                              last edited by

                              ; Configuration file for Duet WiFi (firmware version 3)
                              ; executed by the firmware on start-up
                              ;
                              ; generated by RepRapFirmware Configuration Tool v2.1.8 on Tue Mar 31 2020 13:40:08 GMT+0200 (Ora legale dell’Europa centrale)

                              ; General preferences
                              G90 ; send absolute coordinates...
                              M83 ; ...but relative extruder moves
                              M550 P"X5SA PRO" ; set printer name

                              ;M667 S1 ; select CoreXY mode
                              M669 K1
                              ; Network
                              M552 S1 ; enable network
                              M586 P0 S1 ; enable HTTP
                              M586 P1 S0 ; disable FTP
                              M586 P2 S0 ; disable Telnet

                              ; Drives
                              M569 P0 S1 ; physical drive 0 goes forwards
                              M569 P1 S0 ; physical drive 1 goes backwards
                              M569 P2 S0 ; physical drive 2 goes backwards
                              M569 P3 S0 ; physical drive 3 goes backwards
                              M584 X0 Y1 Z2 E3 ; set drive mapping
                              M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
                              M92 X80.00 Y80.00 Z4000.00 E420.00 ; set steps per mm
                              M566 X900.00 Y900.00 Z12.00 E120.00 ; set maximum instantaneous speed changes (mm/min)
                              M203 X6000.00 Y6000.00 Z180.00 E1200.00 ; set maximum speeds (mm/min)
                              M201 X500.00 Y500.00 Z20.00 E250.00 ; set accelerations (mm/s^2)
                              M906 X800 Y800 Z800 E800 I30 ; set motor currents (mA) and motor idle factor in per cent
                              M84 S30 ; Set idle timeout

                              ; Axis Limits
                              M208 X0 Y0 Z0 S1 ; set axis minima
                              M208 X330 Y330 Z400 S0 ; set axis maxima

                              ; Endstops
                              M574 X1 S1 P"xstop" ; configure active-high endstop for low end on X via pin xstop
                              M574 Y1 S1 P"ystop" ; configure active-high endstop for low end on Y via pin ystop
                              M574 Z1 S2 ; configure Z-probe endstop for low end on Z

                              ; Z-Probe
                              M558 P5 C"zprobe.in" H5 F120 T6000 ; set Z probe type to unmodulated and the dive height + speeds
                              G31 P500 X0 Y0 Z2.5 ; set Z probe trigger value, offset and trigger height
                              M557 X60:300 Y50:300 S20 ; define mesh grid

                              ; Heaters
                              M308 S0 P"bedtemp" Y"thermistor" T100000 B4138 ; configure sensor 0 as thermistor on pin bedtemp
                              M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0
                              M143 H0 S120 ; set temperature limit for heater 0 to 120C
                              M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit
                              M140 H0 ; map heated bed to heater 0
                              M308 S1 P"e0temp" Y"thermistor" T100000 B4138 ; configure sensor 1 as thermistor on pin e0temp
                              M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
                              M143 H1 S280 ; set temperature limit for heater 1 to 280C
                              M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit

                              ; Fans
                              M950 F0 C"fan0" Q500 ; create fan 0 on pin fan0 and set its frequency
                              M106 P0 S0 H-1 ; set fan 0 value. Thermostatic control is turned off
                              M950 F1 C"fan1" Q500 ; create fan 1 on pin fan1 and set its frequency
                              M106 P1 S1 H1 T45 ; set fan 1 value. Thermostatic control is turned on

                              ; Tools
                              M563 P0 D0 H1 F0 ; define tool 0
                              G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
                              G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C

                              ; Custom settings are not defined

                              ; Miscellaneous
                              M911 S22 R23 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set voltage thresholds and actions to run on power loss

                              1 Reply Last reply Reply Quote 0
                              • Leblondundefined
                                Leblond
                                last edited by

                                sicuramente e' tutto sbagliato ma l'ho fatto con il configuratore reprap

                                1 Reply Last reply Reply Quote 0
                                • Leblondundefined
                                  Leblond
                                  last edited by

                                  20200331_185549.jpg

                                  1 Reply Last reply Reply Quote 0
                                  • Leblondundefined
                                    Leblond
                                    last edited by

                                    l'unico problema elettrico che ho riscontrato e' il colore dei fili
                                    2b rosso
                                    2a blu
                                    1a verde
                                    1b nero

                                    ma la connessione dei fili dei motori sono invertiti le fasi 1a e 1b
                                    che sia quello?

                                    1 Reply Last reply Reply Quote 0
                                    • Leblondundefined
                                      Leblond
                                      last edited by

                                      cioe' i cavi dei motori che dovrebbero essere 2b-R 2a-B 1a-V 1b-N sui fili 1a e 1b sono invertiti

                                      1 Reply Last reply Reply Quote 0
                                      • Leblondundefined
                                        Leblond
                                        last edited by

                                        G28
                                        Error: Z probe already triggered at start of probing move

                                        1 Reply Last reply Reply Quote 0
                                        • Leblondundefined
                                          Leblond
                                          last edited by

                                          Ragazzi ho realmente bisogno di voi, non ce ne salto fuori, mi continua a dare come errore Z probe already triggered at start of probing move

                                          1 Reply Last reply Reply Quote 0
                                          • Leblondundefined
                                            Leblond
                                            last edited by

                                            Non so come fargli cambiare stato

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA