Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Cambio elettronica

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    9
    124
    6.3k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Leblondundefined
      Leblond
      last edited by

      Forse sono stanco io, ma non trovo la versione 3.0 del fw quello stabile, mi date il link che provo a reinstallare e provare, si sa mai....

      1 Reply Last reply Reply Quote 0
      • A Former User?
        A Former User @deckingman
        last edited by

        @deckingman said in Cambio elettronica:

        Όλα αυτά είναι ελληνικά για μένα

        希臘人會說這是中國人

        Leblondundefined 1 Reply Last reply Reply Quote 0
        • Leblondundefined
          Leblond @A Former User
          last edited by

          @bearer anche gli italiani 😂

          1 Reply Last reply Reply Quote 0
          • Leblondundefined
            Leblond
            last edited by

            buon pomeriggio a tutti.
            Ho guardato in rete se trovavo qualche soluzione al mio problema, ma non c'e' niente, quindi mi chiedo come mai sulla scheda della tronxy il sensore XY-08N NPN NO funziona e sulla duet2 wifi no

            1 Reply Last reply Reply Quote 0
            • Leblondundefined
              Leblond
              last edited by

              Ho installato la versione stabile del fw 3.0, ma non è cambiato assolutamente niente, la prova statica mi ha dato esito positivo, quindi il sensore funziona, il test dinamico non posso farlo dato che il piano di stampa non si ferma quando attivo manualmente il sensore

              1 Reply Last reply Reply Quote 0
              • Leblondundefined
                Leblond
                last edited by

                @dc42 nonostante tutto non riesco ad usare il sensore, qualche idea in merito?

                1 Reply Last reply Reply Quote 0
                • Leblondundefined
                  Leblond
                  last edited by

                  vi descrivo la procedura che aveva l'altra scheda elettronica per fare l'homing di tutti gli assi.
                  il primo asse ad andare in home era X poi Y e poi Z.
                  Con la duet2 wifi invece avviene l'inverso cioe': si alza prima Z poi non trovando niente si blocca e parte per una frazione di secondo X e Y bloccandosi con ronzio della scheda e di conseguenza causa errore.

                  droftartsundefined 1 Reply Last reply Reply Quote 0
                  • droftartsundefined
                    droftarts administrators @Leblond
                    last edited by

                    @Leblond "the static test gave me a positive result, so the sensor works,"

                    Do you mean that you get a response in the DWC, with the probe value going from 0 to 1000 when you put something under the probe, here?

                    Screenshot 2020-04-01 at 13.15.56.png

                    If correct, then the probe should work, and it's your config.g and probably homing files you need to edit. I know you have posted these before, but please post your current config.g, homeall.g and homez.g files.

                    Ian

                    Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                    Leblondundefined 1 Reply Last reply Reply Quote 0
                    • Leblondundefined
                      Leblond @droftarts
                      last edited by

                      @droftarts si scusa ho fatto macello, appena possibile ti mando il tutto, perdonami ancora

                      1 Reply Last reply Reply Quote 0
                      • Leblondundefined
                        Leblond
                        last edited by

                        Eccomi

                        ; Configuration file for Duet WiFi (firmware version 3)
                        ; executed by the firmware on start-up
                        ;
                        ; generated by RepRapFirmware Configuration Tool v2.1.8 on Thu Apr 02 2020 16:46:31 GMT+0200 (Ora legale dell’Europa centrale)

                        ; General preferences
                        G90 ; send absolute coordinates...
                        M83 ; ...but relative extruder moves
                        M550 P"X5SA PRO" ; set printer name

                        M667 S1 ; select CoreXY mode

                        ; Network
                        M552 S1 ; enable network
                        M586 P0 S1 ; enable HTTP
                        M586 P1 S0 ; disable FTP
                        M586 P2 S0 ; disable Telnet

                        ; Drives
                        M569 P0 S1 ; physical drive 0 goes forwards
                        M569 P1 S1 ; physical drive 1 goes forwards
                        M569 P2 S1 ; physical drive 2 goes forwards
                        M569 P3 S1 ; physical drive 3 goes forwards
                        M584 X0 Y1 Z2 E3 ; set drive mapping
                        M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
                        M92 X80.00 Y80.00 Z400.00 E420.00 ; set steps per mm
                        M566 X900.00 Y900.00 Z12.00 E120.00 ; set maximum instantaneous speed changes (mm/min)
                        M203 X6000.00 Y6000.00 Z180.00 E1200.00 ; set maximum speeds (mm/min)
                        M201 X500.00 Y500.00 Z20.00 E250.00 ; set accelerations (mm/s^2)
                        M906 X800 Y800 Z800 E800 I30 ; set motor currents (mA) and motor idle factor in per cent
                        M84 S30 ; Set idle timeout

                        ; Axis Limits
                        M208 X0 Y0 Z0 S1 ; set axis minima
                        M208 X330 Y330 Z400 S0 ; set axis maxima

                        ; Endstops
                        M574 X1 S1 P"xstop" ; configure active-high endstop for low end on X via pin xstop
                        M574 Y1 S1 P"ystop" ; configure active-high endstop for low end on Y via pin ystop
                        M574 Z1 S2 ; configure Z-probe endstop for low end on Z

                        ; Z-Probe
                        M558 P5 C"zprobe.in" I1 H5 F120 T6000 ; set Z probe type to unmodulated and the dive height + speeds
                        G31 P500 X0 Y0 Z2.5 ; set Z probe trigger value, offset and trigger height
                        M557 X60:300 Y50:300 S20 ; define mesh grid

                        ; Heaters
                        M308 S0 P"bedtemp" Y"thermistor" T100000 B4092 ; configure sensor 0 as thermistor on pin bedtemp
                        M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0
                        M143 H0 S120 ; set temperature limit for heater 0 to 120C
                        M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit
                        M140 H0 ; map heated bed to heater 0
                        M308 S1 P"e0temp" Y"thermistor" T100000 B4092 ; configure sensor 1 as thermistor on pin e0temp
                        M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
                        M143 H1 S280 ; set temperature limit for heater 1 to 280C
                        M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit

                        ; Fans
                        M950 F0 C"fan0" Q500 ; create fan 0 on pin fan0 and set its frequency
                        M106 P0 S0 H-1 ; set fan 0 value. Thermostatic control is turned off
                        M950 F1 C"fan1" Q500 ; create fan 1 on pin fan1 and set its frequency
                        M106 P1 S1 H1 T45 ; set fan 1 value. Thermostatic control is turned on

                        ; Tools
                        M563 P0 D0 H1 F0 ; define tool 0
                        G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
                        G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C

                        ; Custom settings are not defined

                        1 Reply Last reply Reply Quote 0
                        • Leblondundefined
                          Leblond
                          last edited by

                          Immagine.jpg

                          1 Reply Last reply Reply Quote 0
                          • Leblondundefined
                            Leblond
                            last edited by

                            ; homeall.g
                            ; called to home all axes
                            ;
                            ; generated by RepRapFirmware Configuration Tool v2.1.8 on Thu Apr 02 2020 16:46:31 GMT+0200 (Ora legale dell’Europa centrale)
                            G91 ; relative positioning
                            G1 H2 Z5 F6000 ; lift Z relative to current position
                            G1 H1 X-335 Y-335 F1800 ; move quickly to X or Y endstop and stop there (first pass)
                            G1 H1 X-335 ; home X axis
                            G1 H1 Y-335 ; home Y axis
                            G1 X5 Y5 F6000 ; go back a few mm
                            G1 H1 X-335 F360 ; move slowly to X axis endstop once more (second pass)
                            G1 H1 Y-335 ; then move slowly to Y axis endstop
                            G90 ; absolute positioning
                            G1 X60 Y50 F6000 ; go to first bed probe point and home Z
                            G30 ; home Z by probing the bed

                            ; Uncomment the following lines to lift Z after probing
                            ;G91 ; relative positioning
                            ;G1 Z5 F100 ; lift Z relative to current position
                            ;G90 ; absolute positioning

                            1 Reply Last reply Reply Quote 0
                            • Leblondundefined
                              Leblond
                              last edited by

                              ; homex.g
                              ; called to home the X axis
                              ;
                              ; generated by RepRapFirmware Configuration Tool v2.1.8 on Thu Apr 02 2020 16:46:31 GMT+0200 (Ora legale dell’Europa centrale)
                              G91 ; relative positioning
                              G1 H2 Z5 F6000 ; lift Z relative to current position
                              G1 H1 X-335 F1800 ; move quickly to X axis endstop and stop there (first pass)
                              G1 X5 F6000 ; go back a few mm
                              G1 H1 X-335 F360 ; move slowly to X axis endstop once more (second pass)
                              G1 H2 Z-5 F6000 ; lower Z again
                              G90 ; absolute positioning

                              1 Reply Last reply Reply Quote 0
                              • Leblondundefined
                                Leblond
                                last edited by

                                ; homey.g
                                ; called to home the Y axis
                                ;
                                ; generated by RepRapFirmware Configuration Tool v2.1.8 on Thu Apr 02 2020 16:46:31 GMT+0200 (Ora legale dell’Europa centrale)
                                G91 ; relative positioning
                                G1 H2 Z5 F6000 ; lift Z relative to current position
                                G1 H1 Y-335 F1800 ; move quickly to Y axis endstop and stop there (first pass)
                                G1 Y5 F6000 ; go back a few mm
                                G1 H1 Y-335 F360 ; move slowly to Y axis endstop once more (second pass)
                                G1 H2 Z-5 F6000 ; lower Z again
                                G90 ; absolute positioning

                                1 Reply Last reply Reply Quote 0
                                • Leblondundefined
                                  Leblond
                                  last edited by

                                  non ho sistemato i file di homing perche' trovo piu' necessario il sensore per adesso, una volta appurato che il sensore fa fermare il piatto allora mi ci mettero' dietro

                                  1 Reply Last reply Reply Quote 0
                                  • Leblondundefined
                                    Leblond
                                    last edited by

                                    console.txt

                                    1 Reply Last reply Reply Quote 0
                                    • Leblondundefined
                                      Leblond
                                      last edited by

                                      ragazzi non so che cacchio ho fatto, ma il piatto si ferma, l'unica cosa che ho fatto e' stato togliere la sd da duet, portarla sul pc, riformattarla e ricaricargli tutto il sistema, una volta fatto cio' ho reinserito la sd nel duet, son dovuto ricorrere a yat, una volta fatto tutto ho riprovato ed incredibilmente funziona, ora vediamo di risolvere gli assi di home

                                      1 Reply Last reply Reply Quote 0
                                      • Leblondundefined
                                        Leblond
                                        last edited by

                                        houston abbiamo un problema

                                        1 Reply Last reply Reply Quote 0
                                        • Leblondundefined
                                          Leblond
                                          last edited by

                                          This post is deleted!
                                          1 Reply Last reply Reply Quote 0
                                          • Leblondundefined
                                            Leblond
                                            last edited by

                                            l'asse z risponde come dovuto +25 si abbassa e -25 si alza anche in automatico
                                            l'asse x e y sempre in manuale rispondono bene
                                            ma quando vado a fare l'homing come mi aspetto l'asse z si abbassa, ma gli assi x e y se ne vann dalla parte opposta e in diagonale, i finecorsa sono dalla parte opposta cioe' asse X davanti a sx e l'asse Y davanti a dx e si spostano di 10 / 15cm poi si fermano e l'asse z va a trovare il sensore come dovuto

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA