• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Sensorless homing

Scheduled Pinned Locked Moved
Duet Hardware and wiring
4
12
483
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    chris
    last edited by 7 Aug 2020, 19:16

    I am trying to enable sensorless homing on my cartesian following the guide the motors don't seem to be detecting or stopping. bellow is my config files.

    1 Reply Last reply Reply Quote 0
    • undefined
      chris
      last edited by 7 Aug 2020, 19:18

      config g :

      ; Drives
      M569 P0 S0 ; physical drive 0 goes forwards
      M569 P1 S0 ; physical drive 1 goes forwards
      M569 P2 S1 ; physical drive 2 goes forwards
      M569 P3 S0 ; physical drive 3 goes forwards
      M584 X0 Y1 Z2 E3 ; set drive mapping
      M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
      M92 X80.00 Y80.00 Z400.00 E633.00 ; set steps per mm
      M566 X900.00 Y900.00 Z12.00 E120.00 ; set maximum instantaneous speed changes (mm/min)
      M203 X18000.00 Y18000.00 Z600.00 E3000.00 ; set maximum speeds (mm/min)
      M201 X500.00 Y500.00 Z100.00 E5000.00 ; set accelerations (mm/s^2)
      M906 X1200 Y1200 Z1200 E1200 I30 ; set motor currents (mA) and motor idle factor in per cent
      M84 S30 ; Set idle timeout

      ; Axis Limits
      M208 X0 Y0 Z0 S1 ; set axis minima
      M208 X310 Y310 Z400 S0 ; set axis maxima

      ; Endstops
      M574 X1 Y1 S3 ; set endstops controlled by motor stall detection
      M574 Z1 S2 ; set endstops controlled by probe
      M564 H0

      ; Z-Probe
      M307 H3 A-1 C-1 D-1 ; disable heater on PWM channel for BLTouch
      M558 P9 H5 F120 T6000 ; set Z probe type to bltouch and the dive height + speeds
      G31 P500 X0 Y0 Z2.5 ; set Z probe trigger value, offset and trigger height
      M557 X15:215 Y15:195 S20 ; define mesh grid

      1 Reply Last reply Reply Quote 0
      • undefined
        chris
        last edited by 7 Aug 2020, 19:19

        homeall.g

        M98 Phomex.g
        M98 Phomey.g
        M98 Phomez.g

        homey.g

        M400 ; wait til stuff stops
        M574 X1 Y1 S3 ; use stall guard for endstops
        M913 X30 Y30 ; drop motor currents to 30%
        M201 X1000 Y1000 ; reduce acceleration on X/Y to stop false triggers
        M915 P0:1 S3 R0 F0 H400; both motors because corexy; Sensitivity 4, don’t take action, don’t filter, 400steps/sec
        G91 ; set relative
        G1 Z5 F1200 S2
        G1 S2 Y-350 F4000 ; move forward 250mm, stopping at the endstop
        G1 Y10 F1200; move away from end
        G1 Z-5 F1200 S2
        G90 ; back to absolute positioning
        M400 ; wait again
        M913 X100 Y100 ; motor currents back to 100%
        M201 X3000 Y3000 ; accel back to original
        M574 X1 Y1 Z0 S0 ; set endstops back

        1 Reply Last reply Reply Quote 0
        • undefined
          chris
          last edited by 7 Aug 2020, 19:26

          This post is deleted!
          1 Reply Last reply Reply Quote 0
          • undefined
            chris
            last edited by 7 Aug 2020, 19:29

            video of motor issue

            1 Reply Last reply Reply Quote 0
            • undefined
              oliof
              last edited by 7 Aug 2020, 20:47

              increase sensitivity until you get wrong readings from the motor starting, then slowly reduce it again.

              <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

              1 Reply Last reply Reply Quote 0
              • undefined
                chris
                last edited by 7 Aug 2020, 20:49

                cheers i am guessing the sensitivity is this line...

                M915 P0:1 S3 R0 F0 H400;

                1 Reply Last reply Reply Quote 0
                • undefined
                  chris
                  last edited by 7 Aug 2020, 21:16

                  M915 P0:1 S-5 R0 F0 H400;

                  even with s-5 motor keeps trying and not triggering

                  1 Reply Last reply Reply Quote 0
                  • undefined
                    baird1fa
                    last edited by 7 Aug 2020, 22:43

                    I do believe you can go all the way to -63. Speed, and motor current are also a factor when using the stall detection. it took me quite a bit to find the sweet spot where the stall detection wouldn't detect the ball screw but would detect it hitting the nozzle. I have also read that it works better at higher speeds but lower current settings. Best of luck.

                    1 Reply Last reply Reply Quote 1
                    • undefined
                      baird1fa
                      last edited by 7 Aug 2020, 22:48

                      The issue you might be having is that you are moving quite slowly at 1200mm/min compared to the number of steps you have set to be reliable. I think many corexy system will move 20mm in 1 full rotation of the motor which would be 400 steps with a 0.9degree motor so that might be your issue. Try lowering that number of steps its your H value in the M915. also try moving faster.

                      1 Reply Last reply Reply Quote 1
                      • undefined
                        chris
                        last edited by 10 Aug 2020, 21:18

                        sorry is a Cartesian cr-10 belt driven

                        1 Reply Last reply Reply Quote 0
                        • undefined
                          Phaedrux Moderator
                          last edited by 11 Aug 2020, 02:50

                          IF sensitivity still isn't getting you to stall detect, decrease current and increase speed.

                          Also review your H value in M915 as @baird1fa has said. Default values aren't going to work most likely, you will need to tune it.

                          https://duet3d.dozuki.com/Wiki/Stall_detection_and_sensorless_homing

                          Z-Bot CoreXY Build | Thingiverse Profile

                          1 Reply Last reply Reply Quote 0
                          9 out of 12
                          • First post
                            9/12
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA