• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Silacone sock for mosquito

Scheduled Pinned Locked Moved Solved
Tuning and tweaking
4
10
334
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    ziggymanpopo
    last edited by 16 Nov 2020, 08:12

    16055140473776388353493397964383.jpg Could not find a sili! sock for my mosquito hotend so i down loaded a mold i thought it turned.out realy good for.high temp silicone 😁 got the mold off of thingiverse in case you need one too
    1..My question is if i add the sock now i should retune my p.i.d.???? And
    2...when i give the gcode comand does it override the previous entry automaticaly...

    undefined 1 Reply Last reply 16 Nov 2020, 08:19 Reply Quote 1
    • undefined
      PCR
      last edited by 16 Nov 2020, 08:18

      yes

      and if you make a M500 after the tuning then yes

      1 Reply Last reply Reply Quote 0
      • undefined
        Veti @ziggymanpopo
        last edited by 16 Nov 2020, 08:19

        @ziggymanpopo said in Silacone sock for mosquito:

        1..My question is if i add the sock now i should retune my p.i.d.???? And

        yes

        2...when i give the gcode comand does it override the previous entry automaticaly...

        that depends how you are saving it.
        if you use m500 then yes.
        otherwise you have to add it to the config.g manually.

        1 Reply Last reply Reply Quote 0
        • undefined
          Veti
          last edited by 16 Nov 2020, 08:24

          https://www.aliexpress.com/item/4000172934426.html

          but the orignal mosquite does not come with a sock, so i take it they did not design for one to be used.
          this makes sense, as the silicone would be detrimental at very high temperatures.

          undefined 1 Reply Last reply 16 Nov 2020, 08:47 Reply Quote 0
          • undefined
            ziggymanpopo
            last edited by 16 Nov 2020, 08:30

            I concur the silicone is good for about 375C sustained. and intermittently to just over 700C according to the manufacturer it would have to be remover for larger print times above 400

            1 Reply Last reply Reply Quote 0
            • undefined
              ziggymanpopo
              last edited by 16 Nov 2020, 08:33

              Thanks veti

              1 Reply Last reply Reply Quote 0
              • undefined
                ziggymanpopo
                last edited by 16 Nov 2020, 08:38

                1605515843246250140833803084542.jpg
                Lol 😁👍

                1 Reply Last reply Reply Quote 0
                • undefined
                  ziggymanpopo
                  last edited by 16 Nov 2020, 08:40

                  Its only a hobby 😁

                  1 Reply Last reply Reply Quote 0
                  • undefined
                    MartinNYHC @Veti
                    last edited by 16 Nov 2020, 08:47

                    @Veti said in Silacone sock for mosquito:

                    https://www.aliexpress.com/item/4000172934426.html

                    but the orignal mosquite does not come with a sock, so i take it they did not design for one to be used.
                    this makes sense, as the silicone would be detrimental at very high temperatures.

                    I'm using them and they work very well.

                    1 Reply Last reply Reply Quote 0
                    • undefined
                      ziggymanpopo
                      last edited by 16 Nov 2020, 09:07

                      Thanks. All

                      1 Reply Last reply Reply Quote 0
                      3 out of 10
                      • First post
                        3/10
                        Last post
                      Unless otherwise noted, all forum content is licensed under CC-BY-SA