• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Z height always not respected

Scheduled Pinned Locked Moved
Tuning and tweaking
4
31
1.1k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    Ducati87 @BoA
    last edited by 3 Dec 2020, 12:51

    @BoA said in Z height always not respected:

    @Ducati87 You can try to add A parameter to M558, for example A4. And slow down probing speed to 120

    ok I will try. Thank you BoA!

    1 Reply Last reply Reply Quote 0
    • undefined
      Phaedrux Moderator
      last edited by 3 Dec 2020, 20:21

      After you changed the hotend did you remeasure your trigger height?

      https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe

      Z-Bot CoreXY Build | Thingiverse Profile

      undefined 1 Reply Last reply 4 Dec 2020, 06:23 Reply Quote 0
      • undefined
        Ducati87 @Phaedrux
        last edited by 4 Dec 2020, 06:23

        @Phaedrux said in Z height always not respected:

        After you changed the hotend did you remeasure your trigger height?

        https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe

        Yes of course but every time I have to adjust the height with babystep.

        1 Reply Last reply Reply Quote 0
        • undefined
          Phaedrux Moderator
          last edited by 4 Dec 2020, 19:00

          Could you share your current config.g, homeall/homez, bed.g, and your slicer start gcode all together in a single post? That way I can see what's going on more clearly.

          If the amount of baby stepping required is consistent, you can modify the G31 and it should take effect. If it's not taking effect than something in the gcode order is not right.

          Z-Bot CoreXY Build | Thingiverse Profile

          undefined 1 Reply Last reply 6 Dec 2020, 19:53 Reply Quote 0
          • undefined
            Ducati87
            last edited by 5 Dec 2020, 10:33

            config.g:

            ; Configuration file for Duet WiFi (firmware version 3)
            ; executed by the firmware on start-up
            ;
            ; generated by RepRapFirmware Configuration Tool v3.1.8 on Fri Nov 20 2020 20:14:09 GMT+0100 (Ora standard dell’Europa centrale)
            ; General preferences
            G90 ; send absolute coordinates...
            M83 ; ...but relative extruder moves
            M550 P"Hypercube Evolution" ; set printer name
            M669 K1 ; select CoreXY mode
            ; Network
            M552 S1 ; enable network
            M586 P0 S1 ; enable HTTP
            M586 P1 S0 ; disable FTP
            M586 P2 S0 ; disable Telnet
            ; Drives
            M569 P0 S1 ; physical drive 0 goes forwards
            M569 P1 S1 ; physical drive 1 goes forwards
            M569 P2 S0 ; physical drive 2 goes forwards
            M569 P3 S1 ; physical drive 3 goes forwards
            M569 P4 S0 ; physical drive 4 goes forwards
            M584 X0 Y1 Z2:4 E3 ; set drive mapping
            M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
            M92 X161.12 Y160.37 Z393.18 E830.00 ; set steps per mm
            M566 X1000.00 Y1000.00 Z70.00 E2000.00 ; set maximum instantaneous speed changes (mm/min)
            M203 X15000.00 Y15000.00 Z1000.00 E2000.00 ; set maximum speeds (mm/min)
            M201 X3000.00 Y3000.00 Z40.00 E6000.00 ; set accelerations (mm/s^2)
            M906 X1000 Y1000 Z1500:Z1500 E1000 I30 ; set motor currents (mA) and motor idle factor in per cent
            M84 S30 ; Set idle timeout
            ; Axis Limits
            ;M208 X0 Y0 Z0 S1 ; set axis minima
            M208 X0:300 Y-35:300 Z285 S0 ; set axis maxima
            ; Endstops
            M574 X1 S3 ; configure sensorless endstop for low end on X
            M574 Y1 S3 ; configure sensorless endstop for low end on Y
            M574 Z1 S2 ; configure Z-probe endstop for low end on Z
            ; Z-Probe
            M950 S0 C"exp.heater3" ; create servo pin 0 for BLTouch
            M558 P9 C"^zprobe.in" H3 F250 T9000 A2 B1 ; set Z probe type to bltouch and the dive height + speeds
            G31 P500 X22 Y-37 Z3.50 ; set Z probe trigger value, offset and trigger height
            M557 X0:280 Y25:230 S40:40 ; define mesh grid
            ; Heaters
            M308 S0 P"bedtemp" Y"thermistor" T100000 B3950 ; configure sensor 0 as thermistor on pin bedtemp
            M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0
            M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit
            M140 H0 ; map heated bed to heater 0
            M143 H0 S120 ; set temperature limit for heater 0 to 120C
            ;M308 S1 P"e0temp" Y"thermistor" T100000 B4725 C7.06e-8 ; configure sensor 1 as thermistor on pin e0temp
            M308 S1 P"spi.cs2" Y"rtd-max31865" ; configure sensor 1 as thermocouple via CS pin spi.cs2
            M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
            M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
            M143 H1 S290 ; set temperature limit for heater 1 to 290C
            ; Fans
            M950 F0 C"Mat Fan1" Q500 ; create fan 0 on pin fan0 and set its frequency
            M106 P0 S0 H-1 ; set fan 0 value. Thermostatic control is turned off
            M950 F1 C"Hotend Fan" Q500 ; create fan 1 on pin fan1 and set its frequency
            M106 P1 S1 H1 T45 ; set fan 1 value. Thermostatic control is turned on
            M950 F2 C"Mat Fan2" Q500 ; create fan 2 on pin fan2 and set its frequency
            M106 P2 S1 H-1 ; set fan 2 value. Thermostatic control is turned off
            ; Tools
            M563 P0 S"hotend 0" D0 H1 F0:2 ; define tool 0
            G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
            G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C
            ; Custom settings
            M404 N1.75 D0.4 ; Nozzle and filament diameter for monitor
            M200 D1.75 ; set all extruder filament diameters to 1.75mm
            M671 X40:280 Y145:145 S10 ; Define positions of Z leadscrews or bed levelling screws
            M376 H10 ; Set bed compensation taper
            ; Miscellaneous
            M575 P1 S1 B57600 ; enable support for PanelDue
            M501 ; load saved parameters from non-volatile memory
            M911 S10 R11 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set voltage thresholds and actions to run on power loss
            T0 ; select first tool

            homeall.g:

            ; homeall.g
            ; called to home all axes
            ;
            ; generated by RepRapFirmware Configuration Tool v3.1.4 on Mon Jul 27 2020 14:28:18 GMT+0200 (Ora legale dell’Europa centrale)
            ;M400
            ;M913 X50 Y50
            ;M915 X F0 H400 S3 R0
            ;M915 Y F0 H400 S2 R0
            ;G91 ; relative positioning
            ;G1 H2 Z5 F7200 ; lift Z relative to current position
            ;G1 H1 X5 F5000
            ;G1 H1 X-305 F5000 S1 ; move quickly to X or Y endstop and stop there (first pass)
            ;G1 H1 X10
            M98 P"homex.g"
            ;G1 H1 Y5 F5000
            ;G1 H1 Y-305 F5000 S1 ; move quickly to X or Y endstop and stop there (first pass)
            ;M913 X100 Y100 ; X motors to 100% current
            ;G90
            ;G1 X120 Y170 F7000 ; go to first bed probe point and home Z
            ;G91 ; relative positioning
            ;G1 H2 Z5 F7200 ; lift Z relative to current position
            ;G90 ; absolute positioning
            ;G1 X110 Y210 F7000 ; go to first bed probe point and home Z
            ;G4 P750 ; pause
            ;G91
            M98 P"homey.g"
            ;BLTouch Z
            ;G30
            ;G90
            ;G1 Z10 F500
            M98 P"homez.g"

            bed.g:

            ; bed.g
            ; called to perform automatic bed compensation via G32
            ;
            ; generated by RepRapFirmware Configuration Tool v3.1.3 on Sun Jul 05 2020 11:59:18 GMT+0200 (Ora legale dell’Europa centrale)
            G29 S2 ;
            M561 ; clear any bed transform
            ;M98 P"homeall.g" ; home all axes
            while iterations <= 3 ; perform 4 passes
            G30 P0 X280 Y145 Z-99999 P8 ; probe near a leadscrew, half way along Y axis
            G30 P1 X40 Y145 Z-99999 S2 P8 ; probe near a leadscrew and calibrate 2 motors
            G1 Z3 F3000 ; raise head 3mm to ensure it is above the Z probe trigger height
            G90 ; back to absolute mode
            ;G29 S1

            homez.g:

            ; homez.g
            ; called to home the Z axis
            ;
            ; generated by RepRapFirmware Configuration Tool v3.1.4 on Mon Jul 27 2020 14:28:19 GMT+0200 (Ora legale dell’Europa centrale)
            G91 ; relative positioning
            ;G1 H2 Z5 F7200 ; lift Z relative to current position
            G90 ; absolute positioning
            G1 X130 Y170 F7000 ; go to first bed probe point and home Z
            G4 P750 ; pause
            G91
            ;BLTouch Z
            G30
            G90
            ;G1 Z10 F500

            start gcode:

            G90 ; use absolute coordinates
            M83 ; extruder relative mode
            M190 S[first_layer_bed_temperature] ; wait for bed temp
            M109 S[first_layer_temperature] ; wait for extruder temp
            G28; homing
            G32; home all without mesh bed level
            G29 S1; mesh bed load
            G1 X5 Y5 Z0.1 F5000.0 ; go outside print area
            G92 E0.0
            G1 X60.0 E9.0 F1000.0 ; intro line
            G1 X100.0 E20 F1000.0 ; intro line
            G92 E0.0
            undefined 1 Reply Last reply 5 Dec 2020, 18:09 Reply Quote 0
            • undefined
              Phaedrux Moderator @Ducati87
              last edited by 5 Dec 2020, 18:09

              @Ducati87 said in Z height always not respected:

              G30 P0 X280 Y145 Z-99999 P8 ; probe near a leadscrew, half way along Y axis
              G30 P1 X40 Y145 Z-99999 S2 P8 ; probe near a leadscrew and calibrate 2 motors

              What's with the P8s?

              @Ducati87 said in Z height always not respected:

              G28; homing
              G32; home all without mesh bed level
              G29 S1; mesh bed load

              When is the last time you created a fresh heightmap?

              Z-Bot CoreXY Build | Thingiverse Profile

              undefined 1 Reply Last reply 6 Dec 2020, 19:42 Reply Quote 0
              • undefined
                Ducati87 @Phaedrux
                last edited by 6 Dec 2020, 19:42

                @Phaedrux said in Z height always not respected:

                @Ducati87 said in Z height always not respected:

                G30 P0 X280 Y145 Z-99999 P8 ; probe near a leadscrew, half way along Y axis
                G30 P1 X40 Y145 Z-99999 S2 P8 ; probe near a leadscrew and calibrate 2 motors

                What's with the P8s?

                @Ducati87 said in Z height always not respected:

                G28; homing
                G32; home all without mesh bed level
                G29 S1; mesh bed load

                When is the last time you created a fresh heightmap?

                the P8 is an error, I deleted them. I created the mesh yesterday in the morning.

                1 Reply Last reply Reply Quote 0
                • undefined
                  Phaedrux Moderator @Phaedrux
                  last edited by 6 Dec 2020, 19:53

                  @Phaedrux said in Z height always not respected:

                  If the amount of baby stepping required is consistent, you can modify the G31 and it should take effect.

                  How much baby stepping are you applying and is it consistent?

                  Z-Bot CoreXY Build | Thingiverse Profile

                  undefined 1 Reply Last reply 7 Dec 2020, 19:38 Reply Quote 0
                  • undefined
                    Ducati87 @Phaedrux
                    last edited by 7 Dec 2020, 19:38

                    @Phaedrux said in Z height always not respected:

                    @Phaedrux said in Z height always not respected:

                    If the amount of baby stepping required is consistent, you can modify the G31 and it should take effect.

                    How much baby stepping are you applying and is it consistent?

                    almost 0.160.

                    1 Reply Last reply Reply Quote 0
                    • undefined
                      Phaedrux Moderator
                      last edited by 7 Dec 2020, 19:39

                      And if you modify G31 to account for the 0.16? (add it to get it closer, subtract to get it further)

                      Z-Bot CoreXY Build | Thingiverse Profile

                      undefined 1 Reply Last reply 7 Dec 2020, 19:43 Reply Quote 0
                      • undefined
                        Ducati87 @Phaedrux
                        last edited by 7 Dec 2020, 19:43

                        @Phaedrux said in Z height always not respected:

                        And if you modify G31 to account for the 0.16? (add it to get it closer, subtract to get it further)

                        I've just done it, I'm going to try.

                        1 Reply Last reply Reply Quote 0
                        30 out of 31
                        • First post
                          30/31
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA