Duet2 WiFi Firmware on Raise 3d E2 ?

[Proschi3D]

@Veti first I want to get the board running again

[Veti]

have you tried these firmwares

https://www.raise3d.com/download/motion-controller-board-firmware-all-versions/

[jay_s_uk]

@Proschi78 the iap from here should work https://github.com/Duet3D/RepRapFirmware/releases/download/2.03/iap4e.bin

[Proschi3D]

@jay_s_uk with 2.02 ?

[jay_s_uk]

@Proschi78 yes

[Proschi3D]

@jay_s_uk ok i will test it

[Proschi3D]

@jay_s_uk

[jay_s_uk]

you need to rename it to match the missing file

[Proschi3D]

@jay_s_uk

[jay_s_uk]

have you uploaded the file i sent you to the same place?

[Proschi3D]

@jay_s_uk yes

[Veti]

@jay_s_uk said in Duet2 WiFi Firmware on Raise 3d E2 ?:

iap4e.bin

did you rename it to Duet2combinesIAP.bin like the error message says?

[Proschi3D]

[Veti]

where did you put the file on the sd card?

[Proschi3D]

[Veti]

you are missing a 2 in the filename

[Proschi3D]

@Veti yes

[Proschi3D]

[Proschi3D]

ok after restart it works

[Proschi3D]

Version 3.0 still on it