Duet 3 Mini 5+ : Initial announcement
-
Too bad e3d will only use fedex for overseas orders, expensive import fees compared to royal mail.
Anyways, am I right in seeing that if you use PanelDue with the Mini5+ you don't have enough inputs to use the 2 stepper expansion if you want to have endtops/filament sensors for all steppers + z probe? As such Pi + hdmi screen or 12864 might be better options.
Or can the 12864 interface be repurposed for general purpose io? (https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview#Section_Pin_names_for_Duet_Num_3 isn't updated with the Mini5+ yet)
-
@bearer said in Duet 3 Mini 5+ : Initial announcement:
Anyways, am I right in seeing that if you use PanelDue with the Mini5+ you don't have enough inputs to use the 2 stepper expansion if you want to have endtops/filament sensors for all steppers + z probe? As such Pi + hdmi screen or 12864 might be better options.
Repurposing the 12864 pins is not currently supported AFAIK. If you need all 7 IO inputs then the display options are a 12864 or a PI+ display.
-
@T3P3Tony said in Duet 3 Mini 5+ : Initial announcement:
Repurposing the 12864 pins is not currently supported AFAIK.
Correct, not supported at present.
-
@bearer said in Duet 3 Mini 5+ : Initial announcement:
Too bad e3d will only use fedex for overseas orders, expensive import fees compared to royal mail.
Royal Mail is really struggling right now, 6+ weeks in some cases. Makes for upset customers.
-
@elmoret could be worse. Could be PostNL.
-
@oliof said in Duet 3 Mini 5+ : Initial announcement:
@elmoret could be worse. Could be PostNL.
or Belguim Post who are currently running 8+ weeks behind
-
would the Duet 2 Maestro Dual Stepper Driver Expansion Module board work on the duet3mini5+? or will it be a specific board for the duet3mini?
-
@ukwebb It will be a specific board. Coming soon.
-
This post is deleted! -
I think I like the not currently and not supported at present undertones. And oh dear, I keep forgetting we're relatively okay with pandemic if we ignore some social restrictions that most nerds wouldn't have noticed anyway if it weren't for the masks.. Oh well, no rush - stay safe out there!
-
@pipersw said in Duet 3 Mini 5+ : Initial announcement:
Few board available on E3donline
Thanks for the hint! It seems I managed to order one.
-
Have to paid 43€ for tax to France a bit expensive
-
Yikes!
Well, we shall see. Someone has to pay all the years of negotiation.At least I should have a board to test the X-axis of my in-development hightemp 3D printer soon. Buying something else temporarily costs money too.
-
@pipersw said in Duet 3 Mini 5+ : Initial announcement:
Have to paid 43€ for tax to France a bit expensive
Hopefully the new eu tax rules will help as of 01.07.2021, but i don't think it's a priority for e3d to adapt to OSS when they have local resellers despite availability being an issue. We got similar rules as of 01.04.2020 and most imports in the 0-300€ range became cheaper, not to mention easier and faster.
-
This post is deleted! -
@pipersw said in Duet 3 Mini 5+ : Initial announcement:
Have to paid 43€ for tax to France a bit expensive
That's crazy! is that the Brexit changes kicking in? My understanding was that (other than VAT) there should be no tariffs/duty on goods. VAT should work itself out as UK VAT is the same/similar to other UK countries (~20%).
-
and we are going to get boards out to our European resellers ASAP!
-
@T3P3Tony the main rule about exporting from UK is that if a product is "at least 20- 40% made in UK" ( depends of category) then there is no extra taxes. There may be some increase in shipping taxes because of the paperwork the UK sender/ carrier needs to fill in.
On topic...I managed to get myself a Duet3 mini and finally get rid of my last non Duet board on my printers. Now just need to forget everything about Marlin and get fully used with RepRap
-
I think pipersw mixes up tax as in import tax and VAT as in value added tax; while not paying UK VAT and paying EU VAT when importing works out to about the same, there is usually a substantial fee to go along with the VAT amount. So while the VAT might be about €20, FedEx adding another €20 or so to process the import is no uncommon. The OSS system due 01.07.2021 "solves" this by allowing foreign sellers to collect EU VAT before sending and eliminating the fee to process imports (at least that's how it worked out up here).
-
E3D does not paid me the VAT, but Fedex add 32€ of tax, and 18€ of administration fees.