Manual Grid Mesh Levelling
-
@Adamfilip said in Manual Grid Mesh Levelling:
Yes I have previously had BLtouch that got ripped off from a loose print.. then replaced it and it it died from a head crash, I had a Duet IR Sensor, same fate. so I tried Piezo and it worked for a while but isn't reliable.
Wow. That is a one streak of bad luck.
How about an inductive sensor - they are quite sturdy - and if you don't use a bed with any sort of magnets they work very well.
Frederick
-
I am using Spring Steel spring bed with magnets underneath
-
@Adamfilip said in Manual Grid Mesh Levelling:
I am using Spring Steel spring bed with magnets underneath
Yeah - so am I - really like it but it means no more inductive sensor - back to the noisy BLTouch.
Frederick
-
I didnt realize the magnets interfered with inductive sensors, how does prusa get away with it?
-
@Adamfilip said in Manual Grid Mesh Levelling:
I didnt realize the magnets interfered with inductive sensors, how does prusa get away with it?
Perhaps they arrange the probe points to be away from the magnets?
-
@dc42 said in Manual Grid Mesh Levelling:
Perhaps they arrange the probe points to be away from the magnets?
Precisely this.
-
So going back to my original ask.
to setup Grid Mesh leveling Manually. is there an easy way to do this?
-
@Adamfilip said in Manual Grid Mesh Levelling:
So going back to my original ask.
to setup Grid Mesh leveling Manually. is there an easy way to do this?
Easy? That depends on what you consider easy.
My first reply to you covered how to set the Z probe configuration to allow bed probing when there is no Z probe.
Frederick
-
Setting m558 P0 and then using g29 as normal will ask you to manually jog the nozzle to touch the bed at each point.
-
-
@Adamfilip said in Manual Grid Mesh Levelling:
It works - I used to do it before I went ahead and installed a Z probe.
Have you considered a removable Z probe - then it cannot get damaged during normal operations.
Frederick
-
this one is very cheap and works well on my delta
https://de.aliexpress.com/item/32838312776.html -
with this, look like you need to run the hotend, cold I assume.
an interesting idea -
@fcwilt havent really but definately something to consider
but so gar the G29 manual is working for me.Thank you for your help with this.
-
@Adamfilip said in Manual Grid Mesh Levelling:
@fcwilt havent really but definately something to consider
but so gar the G29 manual is working for me.Thank you for your help with this.
Glad to help.
Frederick
-
If you are running a Duet 3 with the SBC, I have released an automated way to probe around the magnets and still get a valid heightmap:
https://forum.duet3d.com/topic/21213/rrf-mesh-level-custom-mesh-bed-probing-with-python?_=1611770964248