• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Duet 2 wifi not connecting to Paneldue 7i

Scheduled Pinned Locked Moved Solved
Duet Hardware and wiring
4
23
971
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    dc42 administrators @3dpnut
    last edited by dc42 3 May 2021, 16:43 5 Mar 2021, 16:40

    @3dpnut said in Duet 2 wifi not connecting to Paneldue 7i:

    @dc42 Thank you! I made the change and now it's speaking to the Paneldue. Still no luck with the wifi tho

    Please send M997 S1 from either USB or PanelDue to re-install the WiFi firmware. The message "WiFi module is being started" persisting usually means that the WiFi firmware is not running.

    Duet WiFi hardware designer and firmware engineer
    Please do not ask me for Duet support via PM or email, use the forum
    http://www.escher3d.com, https://miscsolutions.wordpress.com

    undefined 2 Replies Last reply 5 Mar 2021, 18:08 Reply Quote 0
    • undefined
      3dpnut @dc42
      last edited by 5 Mar 2021, 18:08

      @dc42 I'm trying to load the results of M997 S1 and the subsequent M552's, but it blocking me as spam by Askimet.com

      1 Reply Last reply Reply Quote 1
      • undefined
        3dpnut @dc42
        last edited by 5 Mar 2021, 18:11

        @dc42 I'll try again:

        This is what I get after successfully running M997 S1:

        95% complete
        Upload successful
        ok
        M552 s1
        ok
        WiFi module started
        WiFi reported error: no known networks found
        WiFi module is idle
        WiFi reported error: no known networks found
        WiFi module is idle
        WiFi reported error: no known networks found
        WiFi module is idle
        WiFi reported error: no known networks found
        WiFi module is idle
        M552 s0
        ok
        WiFi reported error: no known networks found
        WiFi module is idle
        M552 S1
        ok
        WiFi reported error: no known networks found
        WiFi module is idle
        WiFi reported error: no known networks found
        WiFi module is idle
        WiFi reported error: no known networks found
        WiFi module is idle

        1 Reply Last reply Reply Quote 0
        • undefined
          Phaedrux Moderator
          last edited by 5 Mar 2021, 18:18

          Ok, the no networks found means that you now need to give it a SSID and password for your wifi network using the M587 command.

          https://duet3d.dozuki.com/Wiki/Gcode?revisionid=HEAD#Section_M587_Add_WiFi_host_network_to_remembered_list_or_list_remembered_networks

          You should now be able to complete the getting connected guide

          https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7#s9

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 0
          • undefined
            3dpnut
            last edited by 5 Mar 2021, 22:09

            Thanks all!! Everything is now working with the exception of a Z homing issue, which I think I can (hopefully :)) figure out. Have a great weekend!

            1 Reply Last reply Reply Quote 0
            • undefined
              3dpnut
              last edited by 15 Mar 2021, 20:07

              I turned the machine on today, and it seems like I turned back the clock 2 weeks. The same thing is happening, not connecting to Wifi. I've run through the same cycles which fixed it last time, no luck. I ran M997 S1, and it re-installed the firmware fine. Then ran M552 S0, OK. Then M552 S1, OK. Then M587 S"xx" P"xx", and it says OK, then times out and says wifi module is idle. My computer is connected to the same network and is connected no problem. I double-checked the password and it's correct.

              What am I doing wrong?

              1 Reply Last reply Reply Quote 0
              • undefined
                Phaedrux Moderator
                last edited by 15 Mar 2021, 20:12

                If you send M587 by itself does it list back your network details?

                Z-Bot CoreXY Build | Thingiverse Profile

                1 Reply Last reply Reply Quote 0
                • undefined
                  3dpnut
                  last edited by 15 Mar 2021, 20:19

                  Sends back:

                  6Dh 35h 38h 37h

                  1 Reply Last reply Reply Quote 0
                  • undefined
                    Phaedrux Moderator
                    last edited by 15 Mar 2021, 20:23

                    Are those SSIDs?

                    Z-Bot CoreXY Build | Thingiverse Profile

                    undefined 1 Reply Last reply 15 Mar 2021, 20:26 Reply Quote 0
                    • undefined
                      3dpnut @Phaedrux
                      last edited by 15 Mar 2021, 20:26

                      @Phaedrux I don't know what they are. I changed my terminal type from binary to text, and it's connected now. Previously I had to change it the other way for it to work...not sure what the correct setting is for that.

                      1 Reply Last reply Reply Quote 0
                      • undefined
                        Phaedrux Moderator
                        last edited by 15 Mar 2021, 20:27

                        I'm not sure what you're talking about, but it sounds like it's working now?

                        Z-Bot CoreXY Build | Thingiverse Profile

                        undefined 1 Reply Last reply 15 Mar 2021, 20:32 Reply Quote 0
                        • undefined
                          3dpnut @Phaedrux
                          last edited by 15 Mar 2021, 20:32

                          @Phaedrux Sorry, its a setting in YAT. It is connected now, fingers crossed it stays that way!

                          1 Reply Last reply Reply Quote 0
                          • First post
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA