Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 2 wifi not connecting to Paneldue 7i

    Scheduled Pinned Locked Moved Solved
    Duet Hardware and wiring
    4
    23
    1.1k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • 3dpnutundefined
      3dpnut @dc42
      last edited by

      @dc42 I'm trying to load the results of M997 S1 and the subsequent M552's, but it blocking me as spam by Askimet.com

      1 Reply Last reply Reply Quote 1
      • 3dpnutundefined
        3dpnut @dc42
        last edited by

        @dc42 I'll try again:

        This is what I get after successfully running M997 S1:

        95% complete
        Upload successful
        ok
        M552 s1
        ok
        WiFi module started
        WiFi reported error: no known networks found
        WiFi module is idle
        WiFi reported error: no known networks found
        WiFi module is idle
        WiFi reported error: no known networks found
        WiFi module is idle
        WiFi reported error: no known networks found
        WiFi module is idle
        M552 s0
        ok
        WiFi reported error: no known networks found
        WiFi module is idle
        M552 S1
        ok
        WiFi reported error: no known networks found
        WiFi module is idle
        WiFi reported error: no known networks found
        WiFi module is idle
        WiFi reported error: no known networks found
        WiFi module is idle

        1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator
          last edited by

          Ok, the no networks found means that you now need to give it a SSID and password for your wifi network using the M587 command.

          https://duet3d.dozuki.com/Wiki/Gcode?revisionid=HEAD#Section_M587_Add_WiFi_host_network_to_remembered_list_or_list_remembered_networks

          You should now be able to complete the getting connected guide

          https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7#s9

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 0
          • 3dpnutundefined
            3dpnut
            last edited by

            Thanks all!! Everything is now working with the exception of a Z homing issue, which I think I can (hopefully :)) figure out. Have a great weekend!

            1 Reply Last reply Reply Quote 0
            • 3dpnutundefined
              3dpnut
              last edited by

              I turned the machine on today, and it seems like I turned back the clock 2 weeks. The same thing is happening, not connecting to Wifi. I've run through the same cycles which fixed it last time, no luck. I ran M997 S1, and it re-installed the firmware fine. Then ran M552 S0, OK. Then M552 S1, OK. Then M587 S"xx" P"xx", and it says OK, then times out and says wifi module is idle. My computer is connected to the same network and is connected no problem. I double-checked the password and it's correct.

              What am I doing wrong?

              1 Reply Last reply Reply Quote 0
              • Phaedruxundefined
                Phaedrux Moderator
                last edited by

                If you send M587 by itself does it list back your network details?

                Z-Bot CoreXY Build | Thingiverse Profile

                1 Reply Last reply Reply Quote 0
                • 3dpnutundefined
                  3dpnut
                  last edited by

                  Sends back:

                  6Dh 35h 38h 37h

                  1 Reply Last reply Reply Quote 0
                  • Phaedruxundefined
                    Phaedrux Moderator
                    last edited by

                    Are those SSIDs?

                    Z-Bot CoreXY Build | Thingiverse Profile

                    3dpnutundefined 1 Reply Last reply Reply Quote 0
                    • 3dpnutundefined
                      3dpnut @Phaedrux
                      last edited by

                      @Phaedrux I don't know what they are. I changed my terminal type from binary to text, and it's connected now. Previously I had to change it the other way for it to work...not sure what the correct setting is for that.

                      1 Reply Last reply Reply Quote 0
                      • Phaedruxundefined
                        Phaedrux Moderator
                        last edited by

                        I'm not sure what you're talking about, but it sounds like it's working now?

                        Z-Bot CoreXY Build | Thingiverse Profile

                        3dpnutundefined 1 Reply Last reply Reply Quote 0
                        • 3dpnutundefined
                          3dpnut @Phaedrux
                          last edited by

                          @Phaedrux Sorry, its a setting in YAT. It is connected now, fingers crossed it stays that way!

                          1 Reply Last reply Reply Quote 0
                          • First post
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA