Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Preview version of CNC optimized DWC.

    Scheduled Pinned Locked Moved
    CNC
    40
    191
    29.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Sindariusundefined
      Sindarius @cjm
      last edited by

      @cjm I didn't include the plugins in this build. I need to post the DRO plugin and I'll update the Jog plugin which is normally available here https://github.com/Sindarius/DWC_Touch_Jog_Control

      cjmundefined 1 Reply Last reply Reply Quote 2
      • cjmundefined
        cjm @Sindarius
        last edited by

        @sindarius Many thanks for the quick answer!

        Sindariusundefined 1 Reply Last reply Reply Quote 1
        • Sindariusundefined
          Sindarius @cjm
          last edited by

          @cjm I found an issue where plugins were not starting properly with the previous version. There is a new release which resolves this issue.

          https://github.com/Duet3D/DWC-CNC/releases/tag/CNC03-3.3.0-RC1%2B1

          The updated plugins are available here
          DRO
          https://github.com/Sindarius/DWC_DRO_Plugin/releases/tag/0.2.0
          Touch Jog Control
          https://github.com/Sindarius/DWC_Touch_Jog_Control/releases/tag/0.2.0

          chimaeraghundefined cjmundefined 2 Replies Last reply Reply Quote 1
          • chimaeraghundefined
            chimaeragh @Sindarius
            last edited by

            @sindarius second link is not working

            Duet 2 Wifi, Ooznest Workbee CNC 1510

            Sindariusundefined 1 Reply Last reply Reply Quote 0
            • Sindariusundefined
              Sindarius @chimaeragh
              last edited by

              @chimaeragh give it a shot now, I had to change the visibility of the repo.

              chimaeraghundefined 1 Reply Last reply Reply Quote 0
              • chimaeraghundefined
                chimaeragh @Sindarius
                last edited by

                @sindarius Thanks. Working now

                Duet 2 Wifi, Ooznest Workbee CNC 1510

                1 Reply Last reply Reply Quote 1
                • cjmundefined
                  cjm @Sindarius
                  last edited by

                  @sindarius Thanks very much - all seems to be working now.
                  The updated jog plug-in looks good too!

                  weed2allundefined 1 Reply Last reply Reply Quote 1
                  • weed2allundefined
                    weed2all @cjm
                    last edited by weed2all

                    @Sindarius I uploaded the touch jog and dro but it seems to get some sort of error when try to start them...I didn't had to much time into it but tomorrow I'll give it a new shot to see what's going on...I might need to do a fresh install of rrf and dwc as well...i will came back with news tomorrow...

                    https://www.thingiverse.com/weed2all/designs

                    Sindariusundefined 1 Reply Last reply Reply Quote 0
                    • Sindariusundefined
                      Sindarius @weed2all
                      last edited by

                      @weed2all let me know. I have tested them with latest DWC-CNC and latest firmware 3.3-RC2

                      weed2allundefined 2 Replies Last reply Reply Quote 1
                      • weed2allundefined
                        weed2all @Sindarius
                        last edited by weed2all

                        @sindarius yes...it might shown the error because what I think is I'm still on the 3.2 firmware...not 100% sure...I'm at work now...in few hours when I get home I'll have time for testing again!

                        https://www.thingiverse.com/weed2all/designs

                        1 Reply Last reply Reply Quote 1
                        • weed2allundefined
                          weed2all @Sindarius
                          last edited by

                          @sindarius ok...now I have all working...just did an update from 3.2 to 3.3 rc2 and the dro plugin and touch plugin are starting now..

                          https://www.thingiverse.com/weed2all/designs

                          Sindariusundefined 1 Reply Last reply Reply Quote 1
                          • Sindariusundefined
                            Sindarius @weed2all
                            last edited by

                            @weed2all glad to hear it is working 👍

                            1 Reply Last reply Reply Quote 0
                            • shanteundefined
                              shante
                              last edited by

                              Hello, im trying to install the gamepad plugin, but im getting "Prerequisites
                              Invalid plugin manifest " error. Can someone help me ? Thank you
                              Im on

                              Duet Web Control 3.3.0-rc1
                              Board: Duet 3 MB6HC (MB6HC)
                              DSF Version: 3.3-rc2
                              Firmware: RepRapFirmware for Duet 3 MB6HC 3.3RC2 (2021-05-11) 
                              
                              1 Reply Last reply Reply Quote 0
                              • jay_s_ukundefined
                                jay_s_uk
                                last edited by

                                @shante have you enabled the third party plugin service?
                                https://forum.duet3d.com/topic/22054/firmware-bundle-3-3beta2-released/2

                                Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                                1 Reply Last reply Reply Quote 0
                                • shanteundefined
                                  shante
                                  last edited by shante

                                  Yes I did(at least i hope i did) as it always returned there is already new version installed, lsm=apparmor is somewhere in a middle in that /boot/cmdline.txt . Does it need to be at end?
                                  I installed TouchJog pluggin, and that seem to work ok.

                                  1 Reply Last reply Reply Quote 0
                                  • crossbowundefined
                                    crossbow @Yveske
                                    last edited by

                                    @yveske said in Preview version of CNC optimized DWC.:

                                    @sindarius Is it possible to have the probe status back please ?

                                    @sindarius I would second that request having just installed your CNC optimised DWC which I think is really great apart from the missing probe status.
                                    Having had a few accidents in the past (after forgetting to plug the probe in or had a poor contact with dust on the probe connector) I always do a quick eyeball of the probe status while touching the probe plate against the cutter before kicking of the probe macro. That is much quicker/easier than running a macro to check endstops (M119)

                                    1 Reply Last reply Reply Quote 1
                                    • cjmundefined
                                      cjm
                                      last edited by cjm

                                      Hello,

                                      I've just noticed that with DWC CNC 3.3.0-RC3 and RC3-CNC04 my spindle appears to have disappeared from the the "Spindles" panel:
                                      9d1e1e82-b15a-439e-bc0f-bc2093fa96b0-image.png

                                      I'm not sure when this happened but, if memory serves, with previous versions the spindle panel showed the spindle status and turned bright green when the spindle was running?

                                      The spindle is configured as follows and responds properly to M3/4/5.

                                      ;Configure Tool 0 as the CNC Spindle
                                      M950 R0 C"exp.13+exp.8+exp.9" Q2000 L500:26200	; Create spindle index 0, PWM frequency 2KHz, rpm tweaked to yield 24K
                                      					   	; and the following connections:
                                      					   	; 	spindle speed PWM pin	: exp.13 pin
                                      					   	; 	spindle run pin 	: exp.8
                                      					   	; 	spindle direction pin 	: exp.9
                                      M563 P0 R0 S"Spindle"                          	; Create Tool 0 with Spindle 0 and call it Spindle 
                                      G10  P0 X0 Y0 Z0                                ; Set Tool 0 axis offsets
                                      M568 P0 F0					; Set Tool 0 to default RPM of 0
                                      T0						; Select Tool 0
                                      
                                      ;Configure CNC Mode 
                                      M453         					; CNC Mode
                                      

                                      When the spindle is running at 8000 RPM it appears in the object model as:
                                      4595a640-f053-4501-8daa-0b9e6190dac6-image.png

                                      Not sure why it says "configured = false"?

                                      I'm using:
                                      Board: Duet 2 Ethernet (2Ethernet)
                                      Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.3RC3 (2021-05-26)

                                      Sindariusundefined 2 Replies Last reply Reply Quote 0
                                      • Sindariusundefined
                                        Sindarius @cjm
                                        last edited by

                                        @cjm I’ll take a look at it. I didn’t make any changes to that control but it is possible something in the OM changed.

                                        1 Reply Last reply Reply Quote 0
                                        • Sindariusundefined
                                          Sindarius @cjm
                                          last edited by

                                          @cjm The structure of the spindle in the object model has changed so I will be making some adjustments to fix it.

                                          cjmundefined 1 Reply Last reply Reply Quote 4
                                          • cjmundefined
                                            cjm @Sindarius
                                            last edited by

                                            @sindarius Thank you!

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA