Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    [DSF Extension] Exec On MCode (was: Shutdown SBC)

    Scheduled Pinned Locked Moved
    DSF Development
    22
    117
    10.7k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • CrazyCreatorundefined
      CrazyCreator @wilriker
      last edited by

      @wilriker
      this the output:

      pi@CCC:~ $ sudo /usr/local/bin/execonmcode -mCode 7722 -command poweroff -debug -trace
2021/05/20 20:27:38 7722: poweroff 
2021/05/20 20:27:38 [DEBUG] <Recv> {"version":11,"id":114}
2021/05/20 20:27:38 [DEBUG] <Send> {"Mode":"Intercept","Version":10,"InterceptionMode":"Pre","Channels":["HTTP","Telnet","File","USB","Aux","Trigger","Queue","LCD","SBC","Daemon","Aux2","AutoPause","Unknown"],"Filters":["M7722"],"PriorityCodes":false}
2021/05/20 20:27:38 [DEBUG] <Recv> {"success":true}
2021/05/20 20:27:38 [DEBUG] <Connect> Connection established
2021/05/20 20:27:47 Connection to DCS closed
2021/05/20 20:27:47 [DEBUG] <Close> Closing connection
2021/05/20 20:27:47 EOF
pi@CCC:~ $ sudo journalctl -eu duetcontrolserver
May 20 18:31:16 CCC DuetControlServer[424]: [warn] IPC#67: Client with outdated protocol version connected (got 10, want 11)
May 20 18:40:55 CCC DuetControlServer[424]: [warn] IPC#69: Client with outdated protocol version connected (got 10, want 11)
May 20 18:43:43 CCC DuetControlServer[424]: [warn] IPC#70: Client with outdated protocol version connected (got 10, want 11)
May 20 18:44:42 CCC DuetControlServer[424]: [warn] IPC#72: Client with outdated protocol version connected (got 10, want 11)
May 20 18:45:54 CCC DuetControlServer[424]: [warn] IPC#75: Client with outdated protocol version connected (got 10, want 11)
May 20 18:46:20 CCC DuetControlServer[424]: [warn] IPC#77: Client with outdated protocol version connected (got 10, want 11)
May 20 18:46:25 CCC DuetControlServer[424]: [warn] IPC#78: Client with outdated protocol version connected (got 10, want 11)
May 20 18:47:03 CCC DuetControlServer[424]: [warn] IPC#80: Client with outdated protocol version connected (got 10, want 11)
May 20 18:47:06 CCC DuetControlServer[424]: [warn] IPC#81: Client with outdated protocol version connected (got 10, want 11)
May 20 18:47:58 CCC DuetControlServer[424]: [warn] IPC#83: Client with outdated protocol version connected (got 10, want 11)
May 20 18:48:08 CCC DuetControlServer[424]: [warn] IPC#85: Client with outdated protocol version connected (got 10, want 11)
May 20 18:58:23 CCC DuetControlServer[424]: [info] Starting macro file homeall.g on channel HTTP
May 20 18:58:23 CCC DuetControlServer[424]: [info] Starting macro file homey.g on channel HTTP
May 20 18:58:28 CCC DuetControlServer[424]: [info] Finished macro file homey.g
May 20 18:58:28 CCC DuetControlServer[424]: [info] Starting macro file homex.g on channel HTTP
May 20 18:58:32 CCC DuetControlServer[424]: [info] Finished macro file homex.g
May 20 18:58:32 CCC DuetControlServer[424]: [info] Starting macro file homez.g on channel HTTP
May 20 18:58:47 CCC DuetControlServer[424]: [info] Starting macro file bed.g on channel HTTP
May 20 18:59:14 CCC DuetControlServer[424]: [info] Finished macro file bed.g
May 20 18:59:15 CCC DuetControlServer[424]: [info] Finished macro file homez.g
May 20 18:59:15 CCC DuetControlServer[424]: [info] Finished macro file homeall.g
May 20 20:26:35 CCC DuetControlServer[424]: [warn] IPC#109: Client with outdated protocol version connected (got 10, want 11)
May 20 20:27:38 CCC DuetControlServer[424]: [warn] IPC#114: Client with outdated protocol version connected (got 10, want 11)
lines 74-96/96 (END)

      http://www.crazycreatorcube.com

      1 Reply Last reply Reply Quote 0
      • CrazyCreatorundefined
        CrazyCreator @wilriker
        last edited by CrazyCreator

        @wilriker
        and with the absolute path:

        pi@CCC:~ $ sudo /usr/local/bin/execonmcode -mCode 7722 -command /usr/bin/poweroff -debug -trace
2021/05/20 20:31:12 7722: /usr/bin/poweroff 
2021/05/20 20:31:12 [DEBUG] <Recv> {"version":11,"id":117}
2021/05/20 20:31:12 [DEBUG] <Send> {"Mode":"Intercept","Version":10,"InterceptionMode":"Pre","Channels":["HTTP","Telnet","File","USB","Aux","Trigger","Queue","LCD","SBC","Daemon","Aux2","AutoPause","Unknown"],"Filters":["M7722"],"PriorityCodes":false}
2021/05/20 20:31:12 [DEBUG] <Recv> {"success":true}
2021/05/20 20:31:12 [DEBUG] <Connect> Connection established
2021/05/20 20:31:48 Connection to DCS closed
2021/05/20 20:31:48 [DEBUG] <Close> Closing connection
2021/05/20 20:31:48 EOF
pi@CCC:~ $ sudo journalctl -eu duetcontrolserver
May 20 18:44:42 CCC DuetControlServer[424]: [warn] IPC#72: Client with outdated protocol version connected (got 10, want 11)
May 20 18:45:54 CCC DuetControlServer[424]: [warn] IPC#75: Client with outdated protocol version connected (got 10, want 11)
May 20 18:46:20 CCC DuetControlServer[424]: [warn] IPC#77: Client with outdated protocol version connected (got 10, want 11)
May 20 18:46:25 CCC DuetControlServer[424]: [warn] IPC#78: Client with outdated protocol version connected (got 10, want 11)
May 20 18:47:03 CCC DuetControlServer[424]: [warn] IPC#80: Client with outdated protocol version connected (got 10, want 11)
May 20 18:47:06 CCC DuetControlServer[424]: [warn] IPC#81: Client with outdated protocol version connected (got 10, want 11)
May 20 18:47:58 CCC DuetControlServer[424]: [warn] IPC#83: Client with outdated protocol version connected (got 10, want 11)
May 20 18:48:08 CCC DuetControlServer[424]: [warn] IPC#85: Client with outdated protocol version connected (got 10, want 11)
May 20 18:58:23 CCC DuetControlServer[424]: [info] Starting macro file homeall.g on channel HTTP
May 20 18:58:23 CCC DuetControlServer[424]: [info] Starting macro file homey.g on channel HTTP
May 20 18:58:28 CCC DuetControlServer[424]: [info] Finished macro file homey.g
May 20 18:58:28 CCC DuetControlServer[424]: [info] Starting macro file homex.g on channel HTTP
May 20 18:58:32 CCC DuetControlServer[424]: [info] Finished macro file homex.g
May 20 18:58:32 CCC DuetControlServer[424]: [info] Starting macro file homez.g on channel HTTP
May 20 18:58:47 CCC DuetControlServer[424]: [info] Starting macro file bed.g on channel HTTP
May 20 18:59:14 CCC DuetControlServer[424]: [info] Finished macro file bed.g
May 20 18:59:15 CCC DuetControlServer[424]: [info] Finished macro file homez.g
May 20 18:59:15 CCC DuetControlServer[424]: [info] Finished macro file homeall.g
May 20 20:26:35 CCC DuetControlServer[424]: [warn] IPC#109: Client with outdated protocol version connected (got 10, want 11)
May 20 20:27:38 CCC DuetControlServer[424]: [warn] IPC#114: Client with outdated protocol version connected (got 10, want 11)
May 20 20:27:57 CCC DuetControlServer[424]: [warn] IPC#116: Client with outdated protocol version connected (got 10, want 11)
May 20 20:31:12 CCC DuetControlServer[424]: [warn] IPC#117: Client with outdated protocol version connected (got 10, want 11)
May 20 20:31:58 CCC DuetControlServer[424]: [warn] IPC#119: Client with outdated protocol version connected (got 10, want 11)
lines 77-99/99 (END)

        http://www.crazycreatorcube.com

        wilrikerundefined 1 Reply Last reply Reply Quote 0
        • wilrikerundefined
          wilriker @CrazyCreator
          last edited by wilriker

          @crazycreator Hm, there is something strange here. I can now reproduce your issue. I have to investigate that.

          EDIT: It seems that you discovered a but in DCS 3.3-rc2 (and possibly earlier) that will be fixed in the next RC (I have to confirm that still).

          Manuel
          Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
          with probably always latest firmware/DWC (incl. betas or self-compiled)
          My Tool Collection

          CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
          • CrazyCreatorundefined
            CrazyCreator @wilriker
            last edited by

            @wilriker
            Why does this always have to happen to me?

            Which RRF version do you use?
            How long do you think it will take to get to the RC?

            http://www.crazycreatorcube.com

            wilrikerundefined 1 Reply Last reply Reply Quote 0
            • wilrikerundefined
              wilriker @CrazyCreator
              last edited by

              @crazycreator It's not RRF but DSF (DCS to be exact) that has that problem. And the next RC is planned to be released within the next couple of days unless important issues will postpone it.

              Manuel
              Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
              with probably always latest firmware/DWC (incl. betas or self-compiled)
              My Tool Collection

              oozeBotundefined 1 Reply Last reply Reply Quote 0
              • CrazyCreatorundefined
                CrazyCreator
                last edited by

                @wilriker
                then I will probably have to wait ... or you can send me an image of your SD card 😄

                http://www.crazycreatorcube.com

                1 Reply Last reply Reply Quote 0
                • oozeBotundefined
                  oozeBot @wilriker
                  last edited by

                  @wilriker - just adding in that I'm experiencing the same thing on 3.3rc2.. I was able to capture it from a console when running below.

                  Do you know if the issue has been found and is being corrected in 3.3rc3? Any interim builds out there floating around I could download to get past this issue?

                  Thanks

                  Capture.PNG

                  Phaedruxundefined wilrikerundefined 2 Replies Last reply Reply Quote 0
                  • Phaedruxundefined
                    Phaedrux Moderator @oozeBot
                    last edited by

                    @oozebot said in [DSF Extension] Exec On MCode (was: Shutdown SBC):

                    Any interim builds out there floating around I could download to get past this issue?

                    You could test with this build but be aware there are other potential issues.

                    https://www.dropbox.com/sh/1bblsmpe8m6kb0p/AAD4J_9-uEEnr-Rvh3OjlXyZa?dl=0

                    Z-Bot CoreXY Build | Thingiverse Profile

                    1 Reply Last reply Reply Quote 0
                    • wilrikerundefined
                      wilriker
                      last edited by

                      @CrazyCreator @oozeBot I can confirm that this bug will be fixed with DSF v3.3-rc3.

                      Manuel
                      Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                      with probably always latest firmware/DWC (incl. betas or self-compiled)
                      My Tool Collection

                      1 Reply Last reply Reply Quote 0
                      • wilrikerundefined
                        wilriker @oozeBot
                        last edited by

                        @oozebot said in [DSF Extension] Exec On MCode (was: Shutdown SBC):

                        Any interim builds out there floating around I could download to get past this issue?

                        There are no interim builds of DSF available. You would have to build it yourself from sources. What @Phaedrux posted was "only" preliminary builds of RRF 3.3-rc3.

                        Manuel
                        Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                        with probably always latest firmware/DWC (incl. betas or self-compiled)
                        My Tool Collection

                        1 Reply Last reply Reply Quote 1
                        • CrazyCreatorundefined
                          CrazyCreator
                          last edited by

                          With the new release 3.3RC3 it works 🙂

                          Now I have to put the code for power off the shelly-pm in my shutdownsbc.service

                          next adventure for me 😉

                          http://www.crazycreatorcube.com

                          1 Reply Last reply Reply Quote 1
                          • CrazyCreatorundefined
                            CrazyCreator @CrazyCreator
                            last edited by

                            @crazycreator

                            here I am ... can someone help me again?

                            After the update, execonmode now works wonderfully.

                            But unfortunately I can't start the web call to switch the shelly off.

                            Unfortunately i can't really work with the console. So it would be nice if someone could take me by the hand and show me the right way so that I know what I can try or test where.

                            So I want to achieve the following:

                            when a certain MCode is called, my Shelly 1PM should be switched off.
                            This would work in my case with the following command:
                            http://192.168.1.47/relay/0?turn=off

                            If I enter this line in a browser (of course only at home in my own network) the Shelly switches off.

                            My goal is now to achieve this via Execonmcode.

                            please help me

                            http://www.crazycreatorcube.com

                            oozeBotundefined 1 Reply Last reply Reply Quote 0
                            • oozeBotundefined
                              oozeBot @CrazyCreator
                              last edited by

                              @crazycreator this should probably be it’s own thread.. but you’ll need to code a shell script to accomplish this. Here is something similar I did for Wemo. Maybe you can take some hints from it.

                              https://forum.duet3d.com/topic/18989/script-to-control-wemos-from-gcode-using-dsf

                              CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                              • CrazyCreatorundefined
                                CrazyCreator @oozeBot
                                last edited by

                                @oozebot
                                I answered you there once

                                http://www.crazycreatorcube.com

                                1 Reply Last reply Reply Quote 0
                                • CthulhuLabsundefined
                                  CthulhuLabs
                                  last edited by CthulhuLabs

                                  Is execonmcode blocking? Meaning if I make an M1999 Mcode which executes a command that takes a moment will my Duet pause till the script is finished?

                                  EDIT: Found my own answer.

                                  Phaedruxundefined 1 Reply Last reply Reply Quote 0
                                  • Phaedruxundefined
                                    Phaedrux Moderator @CthulhuLabs
                                    last edited by

                                    @cthulhulabs said in [DSF Extension] Exec On MCode (was: Shutdown SBC):

                                    EDIT: Found my own answer.

                                    What's the answer?

                                    Z-Bot CoreXY Build | Thingiverse Profile

                                    wilrikerundefined 1 Reply Last reply Reply Quote 0
                                    • wilrikerundefined
                                      wilriker @Phaedrux
                                      last edited by

                                      @phaedrux said in [DSF Extension] Exec On MCode (was: Shutdown SBC):

                                      What's the answer?

                                      The answer is that it depends on whether or not you use the -execAsync flag when starting execonmcode. If you do it won't block and if you omit it it will wait until the command has finished.

                                      Manuel
                                      Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                                      with probably always latest firmware/DWC (incl. betas or self-compiled)
                                      My Tool Collection

                                      1 Reply Last reply Reply Quote 1
                                      • oozeBotundefined
                                        oozeBot @wilriker
                                        last edited by

                                        @wilriker said in [DSF Extension] Exec On MCode (was: Shutdown SBC):

                                        @oozeBot said in [DSF Extension] Exec On MCode (was: Shutdown SBC):

                                        @wilriker Could you please provide a simple example of using the -returnOutput flag? Thanks

                                        Simple example:

                                        execonmode -mCode 7777 -command "whoami" -returnOutput

                                        will not just confirm successful completion of the command but as part of this return the output of whoami (that returns the user execonmcode is started as, so probably root) so you can see it e.g. in DWC.

                                        Digging this back up.. Does anyone know if it is possible to assign the -returnOutput to a variable?

                                        T3P3Tonyundefined 1 Reply Last reply Reply Quote 0
                                        • chrishammundefined chrishamm referenced this topic
                                        • T3P3Tonyundefined
                                          T3P3Tony administrators @oozeBot
                                          last edited by

                                          @wilriker @Falcounet

                                          Just replying here to point to the python version:
                                          https://forum.duet3d.com/topic/29783/execonmcode-v0-1

                                          www.duet3d.com

                                          1 Reply Last reply Reply Quote 1
                                          • wilrikerundefined wilriker locked this topic
                                          • Phaedruxundefined Phaedrux referenced this topic
                                          • First post
                                            Last post
                                          Unless otherwise noted, all forum content is licensed under CC-BY-SA