PanelDue Firmware 3.3.0-rc1 released

mfs12 · 24 Jun 2021, 11:59

I just build my first release candidate for PanelDue.

Please feel invited to test and report your experience. Unfortunately i don't have 4.3 inch device so these are not yet tested. If you have a 4.3 inch device I am very happy to hear from you.

Release Notes 3.3.0-rc1

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

Features:

added Russian translation
added support for emerging backlight mp3302 chip
renamed 'Print' tab into 'Status'
added slicer time
added simulated time
removed layer time
faster and consistent display of printer status
display IP address of printer in Setup tab
adaption to changes of object model
allow assignment of fans, extruders and heaters to multipls beds, chambers or tools

Bug fixes:

gracefully handle parsing errors in M409 K"<key>" requests
show warning instead of error when JSON parsing errors occur
fix displaying of percent sign
fix displaying of M291 dialogs

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.3.0-rc1

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

Dougal1957 · 24 Jun 2021, 12:26

@mfs12 the upgrade notes need to be changed to reflect that from ref 3.3 the firmware file needs to be uploaded to the Firmware folder rather than the sys folder.

Doug

droftarts · 24 Jun 2021, 12:56

@dougal1957 said in PanelDue Firmware 3.3.0-rc1 released:

@mfs12 the upgrade notes need to be changed to reflect that from ref 3.3 the firmware file needs to be uploaded to the Firmware folder rather than the sys folder.

Thanks, done.

Ian

mloidl · 24 Jun 2021, 13:10

No print done so far, but clicked through the menus executed some macros and did a simulation.
No problems so far.

Simulated time was shown during the already simulated print after pressing "Simulate again".

I will do a real print in the evening.

Tested on a PanelDue: v2-4.3"

mloidl · 24 Jun 2021, 14:30

Now i've tried to do a real print an got an error because the file was not found.
.

Seems PanelDue is not sending the full path to RRF. The full path of the file was "0:/gcodes/Schuhloeffel_Hacken_0.2mm_PLA_2x.gcode".
Also renaming the file to a shorter filename without having a 'dot' in between did not work.

When starting the print from DWC the Times left (Simulated and from Slicer) are shown correctly but simulated time is never updated during the print.

If it's relevant:

Board: Duet 2 WiFi (2WiFi)
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.3 (2021-06-15)
Duet WiFi Server Version: 1.26

mfs12 · 24 Jun 2021, 17:10

@mloidl thanks for reporting. I can confirm this issue. And will have a look into it as soon as possible.

PaulHew · 24 Jun 2021, 19:07

Could someone explain what the difference is between the normal files and the 'encoder' files, please.

 PanelDueFirmware-3.3.0-rc1-5.0i-7.0i-encoder.bin

TIA

Paul

jay_s_uk · 24 Jun 2021, 19:28

@paulhew the encoder allows an encoder to be used for input. Not sure what input features actually use that though

dc42 · 25 Jun 2021, 07:48

@mloidl were you trying to print from the SD card in the Duet, or the SD card in the PanelDue?

mloidl · 25 Jun 2021, 08:44

@dc42 SD Card in the Duet. I have no SD-Card in the PanelDue inserted.

dc42 · 25 Jun 2021, 08:50

@mloidl thanks.

Our engineer has located the problem and will work on producing updated binaries early next week.

mloidl · 25 Jun 2021, 12:10

I can confirm the start print / simulate print problem from 3.3.0-rc1 is fixed with 3.3.0-rc2

Thanks a lot @mfs12 for the fast fix.

mfs12 · 28 Jun 2021, 05:22

Hey, just posted the new release notes for 3.3.0-rc2. This makes PanelDue Firmware 3.3.0-rc1 obsolete.

Check https://forum.duet3d.com/topic/23925/paneldue-firmware-3-3-0-rc2-released/1

I am happy to receive your feedback on the new release. Thanks.