PanelDue Firmware 3.3.0-rc1 released

Dougal1957

@mfs12 the upgrade notes need to be changed to reflect that from ref 3.3 the firmware file needs to be uploaded to the Firmware folder rather than the sys folder.

Doug

droftarts

@dougal1957 said in PanelDue Firmware 3.3.0-rc1 released:

@mfs12 the upgrade notes need to be changed to reflect that from ref 3.3 the firmware file needs to be uploaded to the Firmware folder rather than the sys folder.

Thanks, done.

Ian

mloidl

No print done so far, but clicked through the menus executed some macros and did a simulation.
No problems so far.

Simulated time was shown during the already simulated print after pressing "Simulate again".

I will do a real print in the evening.

Tested on a PanelDue: v2-4.3"

mloidl

Now i've tried to do a real print an got an error because the file was not found.
.

Seems PanelDue is not sending the full path to RRF. The full path of the file was "0:/gcodes/Schuhloeffel_Hacken_0.2mm_PLA_2x.gcode".
Also renaming the file to a shorter filename without having a 'dot' in between did not work.

When starting the print from DWC the Times left (Simulated and from Slicer) are shown correctly but simulated time is never updated during the print.

If it's relevant:

Board: Duet 2 WiFi (2WiFi)
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.3 (2021-06-15)
Duet WiFi Server Version: 1.26

mfs12

@mloidl thanks for reporting. I can confirm this issue. And will have a look into it as soon as possible.

PaulHew

Could someone explain what the difference is between the normal files and the 'encoder' files, please.

PanelDueFirmware-3.3.0-rc1-5.0i-7.0i-encoder.bin

TIA

Paul

jay_s_uk

@paulhew the encoder allows an encoder to be used for input. Not sure what input features actually use that though

dc42

@mloidl were you trying to print from the SD card in the Duet, or the SD card in the PanelDue?

mloidl

@dc42 SD Card in the Duet. I have no SD-Card in the PanelDue inserted.

dc42

@mloidl thanks.

Our engineer has located the problem and will work on producing updated binaries early next week.

mloidl

I can confirm the start print / simulate print problem from 3.3.0-rc1 is fixed with 3.3.0-rc2

Thanks a lot @mfs12 for the fast fix.

mfs12

Hey, just posted the new release notes for 3.3.0-rc2. This makes PanelDue Firmware 3.3.0-rc1 obsolete.

Check https://forum.duet3d.com/topic/23925/paneldue-firmware-3-3-0-rc2-released/1

I am happy to receive your feedback on the new release. Thanks.