Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Smart Effector V3 an plastic nut

    Scheduled Pinned Locked Moved
    Smart effector for delta printers
    7
    24
    1.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • GuruSMIundefined
      GuruSMI @Velvia
      last edited by

      @velvia

      1. It isn't my thing. So i do not have any more stuff like you.
      2. There aren't M3 screws. There are holes for M2. They did fit very well for my dragonfly.
      3. For the Bowden i had a M6 Holder added to a original Capricorn Set. The thread i did cut myself.
      4. The nut wich did hold my full construction has been a M12 metal nut.
      1 Reply Last reply Reply Quote 0
      • Fred-Yundefined
        Fred-Y @Velvia
        last edited by

        @velvia I'm actually working on something.
        https://www.thingiverse.com/thing:4948025

        I have a Smart Effector v2, I'm not sure if it will fit on a v3.

        I am also added a proper inside groove to clip the PTFE tube.
        Initially I wanted to use a threaded connector but it is not possible, it would not be strong enough (wall too tin).

        7a8daa19-6b8d-443e-a308-bdf6398ed71b-image.png

        This the adapter in printed of PA-CF at .1mm later (I tried ABS+ but it just broke when I tightened the nut) and the nuts with eSun ABS+.

        b0ad777c-c8bc-48aa-b8e9-cd172d5a130e-IMG_2550.JPG

        Velviaundefined 2 Replies Last reply Reply Quote 1
        • Velviaundefined
          Velvia @Fred-Y
          last edited by Velvia

          @fred-y This looks promising! Will try in CF-ABS or CF-PC. I also have a V2 for some reason. I thought V3 was latest, just got mine today from E3D.
          edit: by the way, is that an accelerometer you have behind the bowden tube? What type is it? Would like to try to use one now that RRF is implementing input shaping.

          Homegrown, grass fed and organically built 350mm delta

          Fred-Yundefined 1 Reply Last reply Reply Quote 0
          • Fred-Yundefined
            Fred-Y @Velvia
            last edited by

            @velvia I haven't found the time to search details about the v3, I'm not even sure if it has been released to be honest.

            I hope Duet3D will make a Smart Effector similar to the Tool Board v1.2 with integrated accelerometer - I designed a mount for it, you can see it on the picture, I will publish it shortly on Thingiverse as well.
            A CANBus would be really nice but it won't be retro-compatible with the Duet 2.

            Anyway, let me know if it requires a few adjustments, the inside groove for the collet has been a little challenging to make, I can easily increase or decrease it.

            1 Reply Last reply Reply Quote 1
            • Velviaundefined
              Velvia @Fred-Y
              last edited by

              @fred-y I printed on in CF-ABS and it looks to work well. I'm waiting for some M2.5 bolts to mount it to the Dragon. I have a suggestion however: add an "arm" with a hole, so that it can be rigid mounted to the smart effector. One is enough. The it would fit nicely with my 40mm fan shroud as well. Or would you be willing to share .step files?

              Homegrown, grass fed and organically built 350mm delta

              Fred-Yundefined 1 Reply Last reply Reply Quote 0
              • Fred-Yundefined
                Fred-Y @Velvia
                last edited by

                @velvia I was actually thinking to do it after having mounted everything, the hotend turns as I try to tight the nozzle - the advantage for me to install it was actually to don't have to use another tool.

                Check this one https://www.thingiverse.com/thing:4947898/files it has 3 arms.
                I found it after I published mine, I think that's what you are looking for, I'm not sure this the 2 heatsinks (TriangleLab vs Phaetus) have the same bolt pattern.

                I might load it in fusion to check, hopefully it works and I can still use the accelerator mount I made 🤞

                Velviaundefined 2 Replies Last reply Reply Quote 0
                • Velviaundefined
                  Velvia @Fred-Y
                  last edited by

                  @fred-y I tried that one, but it's designed for a PC4 M6 bowden coupler. Yours worked great.

                  Homegrown, grass fed and organically built 350mm delta

                  Fred-Yundefined 2 Replies Last reply Reply Quote 0
                  • Fred-Yundefined
                    Fred-Y @Velvia
                    last edited by

                    @velvia I'm working on it, I'm going to make a 2 and 3 arms version.
                    I'm pretty sire it can work with my accelerometer mount with no issue.

                    a19eda0d-8c05-4c20-8b75-9bf8985d16ef-image.png

                    76eeacac-cf24-49af-bd42-865fc1637246-image.png

                    I will publish when I printed it, I need to check the tolerances for the nuts and make sure it's solid enough.

                    I hope it won't impact the sensibility of the effector.

                    1 Reply Last reply Reply Quote 0
                    • Fred-Yundefined
                      Fred-Y @Velvia
                      last edited by

                      @velvia I added the new version here: https://www.thingiverse.com/thing:4948025

                      I printed it but I haven't installed it so far, I will do it tomorrow it need to disassemble by Delta.
                      Support are not required not the nuts.

                      PCRundefined 1 Reply Last reply Reply Quote 0
                      • PCRundefined
                        PCR @Fred-Y
                        last edited by

                        @fred-y couls you share the .step ? 😉

                        Fred-Yundefined 1 Reply Last reply Reply Quote 0
                        • Velviaundefined
                          Velvia @Fred-Y
                          last edited by Velvia

                          @fred-y I remixed that one to have one arm. Step file included: https://www.thingiverse.com/thing:4957839
                          It still uses M6 PC4 bowden connector though. Ordered one from aliexpress.

                          bfa4bbb0-a929-448e-9936-5e29b830732d-image.png

                          The reason I made it with only one arm is because of the 40mm fan shroud I made, which requires the other 2 holes. The model of it is a mess, but it prints without supports and seems to work.

                          Homegrown, grass fed and organically built 350mm delta

                          1 Reply Last reply Reply Quote 0
                          • Fred-Yundefined
                            Fred-Y @PCR
                            last edited by

                            @pcr STEP file has been added.

                            1 Reply Last reply Reply Quote 0
                            • garyd9undefined
                              garyd9 @GuruSMI
                              last edited by

                              @gurusmi said in Smart Effector V3 an plastic nut:

                              the adapter i talked about ist that Thing. There i printed only the adapter named Dragon_Adapter_v3.stl, It is made for the full dragon hontend and also for the BMO. You will have to take off the BMO's groove adapter. One don't need the Groove Adapter any longer with this design.

                              I realize that this is an older post I'm replying to. However, this is the first I'm seeing it. As the author of that thing, I'm kind of amused that you are asking any questions about nuts. When I designed the adapter, I realized that there are two different threads being used for smart effectors, and to avoid any issues, I included a .STL file of a nut that works fine. I even mention it in the instructions:

                              After attaching the adapter to the hotend, simply put the M12 threads of the adapter through the 12mm hole in the smart effector, and attach the printed nut.

                              I'd suggest scaling the nut to 100.1% if printing at the original size doesn't work. The nut should be a tight fit (to prevent it loosening) but not impossible to thread on the adapter.

                              I actually prefer using the plastic printed nut to using a metal one for weight savings. I also feel that I can tweak the scaling of the nut in order to make a very tight fit on the threads (which avoids any issue of the nut loosening over time.)

                              I am happy to see remixes of the thing that add "arms" to prevent rotation of the hotend.

                              "I'm not saying that you are wrong - I'm just trying to fit it into my real world simulated experience."

                              Fred-Yundefined 1 Reply Last reply Reply Quote 0
                              • Fred-Yundefined
                                Fred-Y @garyd9
                                last edited by

                                @garyd9 Thanks for making the original design and sharing the STEP file 👍

                                1 Reply Last reply Reply Quote 0
                                • First post
                                  Last post
                                Unless otherwise noted, all forum content is licensed under CC-BY-SA