Slow all the time at 2000% speed
-
@paulhew I'll give those a go, Thanks for the help. I'll be testing them in the next hour once this part is printed.
-
-
@paulhew It's at 0 which is default so I assume that's off?
-
@jbourns I found this for calculating Volumetric speed.
https://docs.google.com/spreadsheets/d/1ZHSRzTm2AR_sXnLSSOq2NSmx0UYtF5bJKHUSFWiDscA/edit#gid=0 -
@paulhew 10mm/3 seems like a good middle ground for the volcano
-
@paulhew The only explanation is that im a daft prick. I think i fugged up my E speeds ands acceleration at some point. Doesn't explain why I couldn't just override it.
https://youtu.be/tr7fGtmQUk8 -
@jbourns the speed multiplier will override the speeds requested in the F parameter of G1/2/3/4 commands, but not the machine speed limits set by M203.
-
@jbourns YEAH!!!
Thanks for keeping us in the loop and letting us know when you figured it out.
-
It was either volumetric flow in prusa slicer or max speed in the config
-
@jbourns trying a different slicer and then testing 2000% let's you decide whether the problem is in the slicer region or in the config/dwc region.
