Only probe where printed. Solution here!

PCR

easier solution

(Cura slicer plugin) To make the macro to work in Cura slicer, you need to install the post process plugin by frankbags - In cura menu Help -> Show configuration folder. - Copy the python script from the above link in to plugins folder. - Restart Cura - In cura menu Extensions -> Post processing -> Modify G-Code and select Mesh Print Size (PLUGIN)

the

M557 X%MINX%:%MAXX% Y%MINY%:%MAXY% S8

supernovae

@pcr So awesome! Thanks!!

FYI, if its not loading for you, rename the file to match exactly the class name - it is CaSE SenSiTive "LevelingMeshOptimizer.pl"

Exerqtor

@dc42 said in Only probe where printed. Solution here!:

Alternatively, to default to probing the whole bed, put this in your start GCode (example shown for IdeaMaker):

var minPrintX = {print_pos_min_x}
var maxPrintX = {print_pos_max_x}
var minPrintY = {print_pos.min_y}
var maxPrintY = {print_pos_max_y}

Then in your mesh.g file:

var m557MinX = -100;  ; put your default here
var m557MaxX = 100;  ; put your default here
var m557MinY = -100;  ; put your default here
var m557MaxX = 100;  ; put your default here
if exists(var.minPrintX)
  set m557MinX = var.minPrintX
if exists(var.maxPrintX)
  set m557MaxX = var.maxPrintX
if exists(var.minPrintY)
  set m557MinY = var.minPrintY
if exists(var.maxPrintY)
  set m557MaxY = var.maxPrintY
M557 X{var.m557MinX,var.m557MaxX} Y{var.m557MinY,var.m557MayY} S8  ; put your required spacing here
G29 S0

Caution: I have not tested this!

I'm using parts of your example now and it it ALMOST works! if i try to run the mesh.g manually it picks up the default size and probe the full bed. But it don't look like it's picking up the actual print area for some reason if i try to do a print.

This is what it my slicer outputs, and it seems right to me:

var minPrintX = 243.659
var maxPrintX = 278.245
var minPrintY = 56.6481
var maxPrintY = 91.2335

I've gotten my slicer setup so that it output's this in the very start of the custom start Gcode, long before the G29.

__

But just a little headsup it's a couple typos in the code

You've set "MaxX" two times in the default section, instead of "MaxY".
And in the M577 you're checking for " m557May" instead of "m557MaxY"

Exerqtor

@dc42

Shouldn't the code be:

if exists(var.minPrintX)
  set var.m557MinX = var.minPrintX
if exists(var.maxPrintX)
  set var.m557MaxX = var.maxPrintX
if exists(var.minPrintY)
  set var.m557MinY = var.minPrintY
if exists(var.maxPrintY)
  set var.m557MaxY = var.maxPrintY

dc42

@exerqtor said in Only probe where printed. Solution here!:

@dc42

Shouldn't the code be:

if exists(var.minPrintX)
  set var.m557MinX = var.minPrintX
if exists(var.maxPrintX)
  set var.m557MaxX = var.maxPrintX
if exists(var.minPrintY)
  set var.m557MinY = var.minPrintY
if exists(var.maxPrintY)
  set var.m557MaxY = var.maxPrintY

Correct! I did say it was untested.

Exerqtor

@dc42 said in Only probe where printed. Solution here!:

@exerqtor said in Only probe where printed. Solution here!:
@dc42

Shouldn't the code be:
if exists(var.minPrintX)
  set var.m557MinX = var.minPrintX
if exists(var.maxPrintX)
  set var.m557MaxX = var.maxPrintX
if exists(var.minPrintY)
  set var.m557MinY = var.minPrintY
if exists(var.maxPrintY)
  set var.m557MaxY = var.maxPrintY
Correct! I did say it was untested.

Yeah np, just trying to get why it don't work lol. For some reason still won't probe just the print area.

Exerqtor

@dc42
Looks like it might be a scope issue, even though "var minPrintX = 88.6323" (for example) is in the start gcode of an ongoing print I get this

3.12.2021, 13:47:51	set var.m557MinX = var.minPrintX
Error: meta command: unknown variable 'minPrintX'

when entered in DWC console.

dc42

@exerqtor each GCode input channel has its own set of local variables. So a local variable created by a print file will not be visible from the console.

supernovae

@pcr said in Only probe where printed. Solution here!:

@supernovae

easier solution

(Cura slicer plugin) To make the macro to work in Cura slicer, you need to install the post process plugin by frankbags - In cura menu Help -> Show configuration folder. - Copy the python script from the above link in to plugins folder. - Restart Cura - In cura menu Extensions -> Post processing -> Modify G-Code and select Mesh Print Size (PLUGIN)

the
M557 X%MINX%:%MAXX% Y%MINY%:%MAXY% S8

Not sure if you can help, but running the python plugin and enabling the M557 in start gcode I always get a huge max X

For example:

looking at the gcode output:

M557 X131.900:1500.000 Y131.900:168.100 S35.000 ; Leveling mesh defined by LevelingMeshOptimizer

Not sure where 1500 comes from.. any idea where to look for in fixing/address that? Or anyone getting this in latest cura?

Exerqtor

@dc42 said in Only probe where printed. Solution here!:

@exerqtor each GCode input channel has its own set of local variables. So a local variable created by a print file will not be visible from the console.

Well in that case I have no idea what to do except declare them as global instead of local, and reset them to the default in the end of each probing session.

dc42

@exerqtor yes that should work.

supernovae

@supernovae

Found the issue, I have some commands to set speed on layers and it shows up as X1500 which the regex catches... maybe i'll try and see if i can limit/exclude it lol

Dogma2k

I'm trying to do this on my printer right now, but somehow I can't get S3D to output the min/max XY for the file to be printed.
Anyone have a tip on how to do this with S3D?

Proschi3D

This post is deleted!