Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Fine editor for working with Duet boards

    Scheduled Pinned Locked Moved
    Third-party software
    13
    50
    3.1k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • fcwiltundefined
      fcwilt @Phaedrux
      last edited by

      @phaedrux said in Fine editor for working with Duet boards:

      People also like to build them into wedge style keyboard cases for the extra authentic look.

      5d3745f1-bf80-400e-9092-3451d059146a-image.png

      I don't recognize that one.

      I had a Atari 800, a Commodore 64, a big CompuPro chassis with a 68000 cpu card, a HeathKit H89 (two of them actually) before moving onto DOS based machines.

      Frederick

      Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

      1 Reply Last reply Reply Quote 0
      • mikeabuilderundefined
        mikeabuilder
        last edited by

        One of my "back in my day" sayings for the new kids used to be showing them a 3.5" dual density (2.88MB - size defined to 2 decimal places) floppy disk in a hard case and tell them this was the "premium" small portable storage 30 years ago. Then I'd tell then how many it would take to store the same amount as a modern device. Today, that's a 1TB micro SD card (that us old guys can barely handle, they're so tiny). So, roughly 350,000 old-style disks. They were about 1/8 inch thick, so a stack of 350K would be over 3600 feet tall.

        Oh yeah, and we had to write to those old ones with a piece of charcoal by candle-light. After walking 5 miles to work through snowdrifts.

        And they hadn't even invented espresso.

        Harumpf.

        Phaedruxundefined deckingmanundefined 2 Replies Last reply Reply Quote 2
        • infiniteloopundefined
          infiniteloop @fcwilt
          last edited by

          @fcwilt said in Fine editor for working with Duet boards:

          I do envy you young folk.

          Young folks? Welcome to the geriatric squad! 🤣

          1 Reply Last reply Reply Quote 1
          • Phaedruxundefined
            Phaedrux Moderator @mikeabuilder
            last edited by

            @mikeabuilder said in Fine editor for working with Duet boards:

            Today, that's a 1TB micro SD card (that us old guys can barely handle, they're so tiny). So, roughly 350,000 old-style disks. They were about 1/8 inch thick, so a stack of 350K would be over 3600 feet tall.

            That reminds me of something I heard once: "Never underestimate the bandwidth of a 747 packed with hard drives."

            This actually proved true recently with radio telescope data spread out across the globe gathering terabytes of data. The fastest way to process it all is to take the drives as carry on luggage to a central location for processing.

            Z-Bot CoreXY Build | Thingiverse Profile

            infiniteloopundefined 1 Reply Last reply Reply Quote 1
            • Norderundefined
              Norder
              last edited by

              The freeware program WinSCP should also work to edit the files on the Duet via FTP.

              Yes, the good old days.
              My first computer had 3" diskettes... exactly, not 3.5" but 3". It was a Schneider CPC, one of the first with a color monitor at the time.
              In DOS and Win 3.11 you used to know every file and what it does... unthinkable today.
              You fought for every byte in Autoexec.bat and Config.sys 😄
              Our Internet was called BBS (Bulletin Board System) and our modem was called "Acoustic Coupler" where you had to put the telephone receiver on it, the WWW came out much later.
              It was a good time.

              Google Translate / German > English

              DDA5X... 0.9° Stepper... Linearrails... Duet 2 Wifi... PT100 Board... Duet IR-Probe... Dyze Pro Kit up to 500°C.. etc
              Thingiverse

              1 Reply Last reply Reply Quote 1
              • Nightowlundefined
                Nightowl @deckingman
                last edited by

                Only by 4 years, @deckingman!

                Few things are more dangerous than taking the advice of someone who thinks he knows what he's doing.
                I'm still on my learning curve, so take everything I say with caution!

                RatRig 1075, Duet3 MB6HC, Sorotec SFM 1000 PV-ER milling motor, Hobbyist

                fcwiltundefined 1 Reply Last reply Reply Quote 0
                • fcwiltundefined
                  fcwilt @Nightowl
                  last edited by

                  @nightowl999 said in Fine editor for working with Duet boards:

                  Only by 4 years, @deckingman!

                  But those last two were really long! 😀

                  70 was a piece of cake, 72 is looking a bit tougher.

                  Frederick

                  Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                  1 Reply Last reply Reply Quote 0
                  • infiniteloopundefined
                    infiniteloop @Phaedrux
                    last edited by

                    @phaedrux said in Fine editor for working with Duet boards:

                    That reminds me of something I heard once: "Never underestimate the bandwidth of a 747 packed with hard drives."

                    … or, back then, a car full of floppy disks. High bandwidth, but with a latency of hours or days 😰

                    1 Reply Last reply Reply Quote 1
                    • fcwiltundefined
                      fcwilt @OwenD
                      last edited by fcwilt

                      @owend said in Fine editor for working with Duet boards:

                      I don't know if there are any rules per se.
                      Mostly they use some sort of regex or keyword list to determine what to highlight.

                      I dug into the Custom Syntax Coloring Scheme Editor that was available from the vendor.

                      Since the Java scheme provided some basic coloring that made sense I started with that and edited it into a scheme for GCode.

                      It was much easier than I thought. And you were right it was basically a set of regex expressions each one handling a comment, variable, reserved word and so forth.

                      Having not used regex expressions very often I had to learn a bit but the vendor has two tools for dealing with them - RegexBuddy and RegexMagic.

                      It was actual kind of fun to see the elements start to be colored according to the rules I was creating.

                      Thanks for pointing that is was possible.

                      Frederick

                      Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                      1 Reply Last reply Reply Quote 1
                      • deckingmanundefined
                        deckingman @mikeabuilder
                        last edited by

                        @mikeabuilder I can go back a bit further and distinctly remember the 8" floppy that wasn't in a hard plastic case but more like a thin cardboard sleeve. IIRC, it could hold about 720k of data.

                        Ian
                        https://somei3deas.wordpress.com/
                        https://www.youtube.com/@deckingman

                        Stephen6309undefined 1 Reply Last reply Reply Quote 2
                        • Stephen6309undefined
                          Stephen6309 @deckingman
                          last edited by

                          @deckingman My first computer: Timex-Sinclair ZX81, then got a Color Computer 2 16k, upgraded to 64k and extended basic , floppy drive , multipak interface, use Microware's OS9 Level One.
                          Then got a Color Computer 3, upgrade 512k, DISTO floppy controller, and Microware's OS9 Level Two, then got a SuperIDE interface, now using NitrOS9. Still have them.

                          1 Reply Last reply Reply Quote 1
                          • First post
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA