Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    I could use some help

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    11
    682
    64.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • fcwiltundefined
      fcwilt @A Former User
      last edited by

      @mac said in I could use some help:

      @fcwilt I'm still considering your M92 edit (moving it to ABOVE the M350 line). Can I simply copy and paste? Will the form renumber itself?

      Yes, you can cut-and-paste a line of code with no problems.

      Frederick

      Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

      1 Reply Last reply Reply Quote 0
      • A Former User?
        A Former User @A Former User
        last edited by

        @droftarts

        ; Endstops
        M574 X1 S1 P"!io5.in"                              ; configure switch-type (e.g. microswitch) endstop for high end on X via pin !io5.in
        M574 Y1 S1 P"!io6.in"                              ; configure switch-type (e.g. microswitch) endstop for high end on Y via pin !io6.in
        M574 Z1 S1 P"io2.in"                                       ; configure Z-probe endstop for low end on Z
        
        fcwiltundefined A Former User? 2 Replies Last reply Reply Quote 0
        • fcwiltundefined
          fcwilt @A Former User
          last edited by

          @mac said in I could use some help:

          @droftarts

          ; Endstops
          M574 X1 S1 P"!io5.in"                              ; configure switch-type (e.g. microswitch) endstop for high end on X via pin !io5.in
          M574 Y1 S1 P"!io6.in"                              ; configure switch-type (e.g. microswitch) endstop for high end on Y via pin !io6.in
          M574 Z1 S1 P"io2.in"                                       ; configure Z-probe endstop for low end on Z
          

          Great!

          Now execute the M119 again and let us know what is reports.

          Frederick

          Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

          1 Reply Last reply Reply Quote 0
          • A Former User?
            A Former User @A Former User
            last edited by

            @droftarts new M119: X not stopped, Y not stopped, Z at min stop, Z probe not stopped

            A Former User? fcwiltundefined 2 Replies Last reply Reply Quote 0
            • A Former User?
              A Former User @A Former User
              last edited by

              @droftarts the print head's six inches off the bed

              fcwiltundefined 1 Reply Last reply Reply Quote 0
              • fcwiltundefined
                fcwilt @A Former User
                last edited by

                @mac said in I could use some help:

                @droftarts new M119: X not stopped, Y not stopped, Z at min stop, Z probe not stopped

                Great!

                Notice that it says Z at min stop - was the Z endstop switch actually closed when you ran the M119?

                Frederick

                Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                A Former User? 1 Reply Last reply Reply Quote 0
                • fcwiltundefined
                  fcwilt @A Former User
                  last edited by

                  @mac said in I could use some help:

                  @droftarts the print head's six inches off the bed

                  I just asked a related question about the Z endstop switch.

                  Now you need to find a way to execute the M119 while both the X and Y endstop switches are closed - maybe with a bit of tape or a rubber band?

                  Frederick

                  Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                  A Former User? 1 Reply Last reply Reply Quote 0
                  • A Former User?
                    A Former User @fcwilt
                    last edited by

                    @fcwilt the only thing that would close the z endstop is if the X axis came down and closed it.

                    fcwiltundefined 1 Reply Last reply Reply Quote 0
                    • A Former User?
                      A Former User @fcwilt
                      last edited by

                      @fcwilt wait, fcwilt? not droftarts? jeeze you guys are ganging up on me!

                      A Former User? fcwiltundefined 2 Replies Last reply Reply Quote 0
                      • fcwiltundefined
                        fcwilt @A Former User
                        last edited by

                        @mac said in I could use some help:

                        @fcwilt the only thing that would close the z endstop is if the X axis came down and closed it.

                        OK that's good to know.

                        If the white wire is actually connected to the NO connection of the Z endstop switch it should not be indicating Z at min stop.

                        Find a way to close the Z endstop switch and execute M119.

                        I want to see if it still reports Z at min stop or if it reports something different.

                        Frederick

                        Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                        A Former User? 1 Reply Last reply Reply Quote 0
                        • A Former User?
                          A Former User @A Former User
                          last edited by

                          @droftarts @fcwilt if we're going to work on this together, I need to know you two are in agreement before I do anything.

                          Do you both agree that I should tape X and Y closed? Then M119 again?

                          fcwiltundefined droftartsundefined 2 Replies Last reply Reply Quote 0
                          • fcwiltundefined
                            fcwilt @A Former User
                            last edited by

                            @mac said in I could use some help:

                            @fcwilt wait, fcwilt? not droftarts? jeeze you guys are ganging up on me!

                            No - it just gets confusing when posts overlap in time.

                            I'm typing, your typing, droftarts is typing - and things get a bit out of order - time wise.

                            Frederick

                            Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                            1 Reply Last reply Reply Quote 0
                            • fcwiltundefined
                              fcwilt @A Former User
                              last edited by

                              @mac said in I could use some help:

                              @droftarts @fcwilt if we're going to work on this together, I need to know you two are in agreement before I do anything.

                              Do you both agree that I should tape X and Y closed? Then M119 again?

                              Mac! You've cut me to the quick! Have you no faith in me! 😉

                              I've only been doing this stuff for years.

                              Frederick

                              Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                              A Former User? 1 Reply Last reply Reply Quote 0
                              • A Former User?
                                A Former User @fcwilt
                                last edited by

                                @fcwilt @droftarts I closed the z-endstop with my left finger, and hit M110 Send with my right finger. M119 reported Z: at end stop, Z probe: not stopped.

                                I'm not making this up, guys.

                                fcwiltundefined 1 Reply Last reply Reply Quote 0
                                • A Former User?
                                  A Former User @fcwilt
                                  last edited by

                                  @fcwilt @droftarts I'm just trying to be respectful to Ian and you.

                                  1 Reply Last reply Reply Quote 1
                                  • droftartsundefined
                                    droftarts administrators @A Former User
                                    last edited by

                                    @mac I’m not able to reply promptly now, I’m away from my computer. @fcwilt knows what he’s doing, though please keep it simple, Frederick!

                                    Ian

                                    Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                                    fcwiltundefined 1 Reply Last reply Reply Quote 0
                                    • fcwiltundefined
                                      fcwilt @droftarts
                                      last edited by

                                      @droftarts said in I could use some help:

                                      @mac I’m not able to reply promptly now, I’m away from my computer. @fcwilt knows what he’s doing, though please keep it simple, Frederick!

                                      Ian

                                      I try to keep it simple, I really do.

                                      Frederick

                                      Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                                      A Former User? 1 Reply Last reply Reply Quote 0
                                      • A Former User?
                                        A Former User @fcwilt
                                        last edited by

                                        @fcwilt @droftarts

                                        ; Drives
                                        M569 P0.0 S1                                       ; physical drive 0.0 goes forwards
                                        M569 P0.1 S1                                       ; physical drive 0.1 goes forwards
                                        M569 P0.2 S1                                       ; physical drive 0.2 goes forwards
                                        M569 P0.3 S1                                       ; physical drive 0.3 goes forwards
                                        M584 X0.0 Y0.1 Z0.2 E0.3                           ; set drive mapping
                                        M92 X40.00 Y40.00 Z2000.00 E420.00                 ; set steps per mm
                                        M350 X16 Y16 Z16 E16 I1                            ; configure microstepping with interpolation
                                        M566 X900.00 Y900.00 Z60.00 E120.00                ; set maximum instantaneous speed changes (mm/min)
                                        M203 X6000.00 Y6000.00 Z600.00 E1200.00            ; set maximum speeds (mm/min)
                                        M201 X500.00 Y500.00 Z200.00 E250.00               ; set accelerations (mm/s^2)
                                        M906 X600 Y600 Z600 E600                           ; set motor currents (mA)
                                        M84 S0                                             ; Disable motor idle current reduction
                                        
                                        A Former User? 1 Reply Last reply Reply Quote 0
                                        • A Former User?
                                          A Former User @A Former User
                                          last edited by A Former User

                                          @mac M92 cut and pasted to before M350, board rebooted.

                                          A Former User? 1 Reply Last reply Reply Quote 0
                                          • A Former User?
                                            A Former User @A Former User
                                            last edited by

                                            @fcwilt okay, I get it, let's continue on, shall we, Frederick?

                                            1 Reply Last reply Reply Quote 1
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA