Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    ERR_CONNECTION_TIMED_OUT

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    4
    7
    310
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Dennis_kimundefined
      Dennis_kim
      last edited by

      I am using duet3 6hc board.
      I connected the micro 5-pin (USB) and lan cable to my laptop (window10)

      When transmitting M552
      'Ethernet is enabled, configured IP address: 192.168.1.20, actual IP address: 192.168.1.20
      '
      comes out

      However, even if I type 192.168.1.20/ in the crome address bar,
      on a white screen
      Only "ERR_CONNECTION_TIMED_OUT" error occurs.
      If anyone knows a solution, please help!!

      M122
      === Diagnostics ===
      RepRapFirmware for Duet 3 MB6HC version 3.4.0 (2022-03-15 18:57:24) running on Duet 3 MB6HC v1.01 or later (standalone mode)
      Board ID: 08DJM-9P63L-DJ3T8-6J1F8-3SJ6N-TB7BA
      Used output buffers: 1 of 40 (1 max)
      === RTOS ===
      Static ram: 151000
      Dynamic ram: 95716 of which 0 recycled
      Never used RAM 103956, free system stack 192 words
      Tasks: NETWORK(ready,27.4%,463) ETHERNET(notifyWait,0.0%,252) HEAT(notifyWait,0.0%,359) Move(notifyWait,0.0%,352) CanReceiv(notifyWait,0.0%,944) CanSender(notifyWait,0.0%,374) CanClock(delaying,0.0%,342) TMC(notifyWait,0.0%,104) MAIN(running,72.6%,1126) IDLE(ready,0.0%,30), total 100.0%
      Owned mutexes: USB(MAIN)
      === Platform ===
      Last reset 00:20:01 ago, cause: power up
      Last software reset time unknown, reason: MemoryProtectionFault mmarValid daccViol, GCodes spinning, available RAM 103956, slot 1
      Software reset code 0x0163 HFSR 0x00000000 CFSR 0x00000082 ICSR 0x00400804 BFAR 0xb6d9335c SP 0x20420048 Task NETW Freestk 576 ok
      Stack: 000104a8 00000000 0000786d a5a5a5bf 00000000 00424dbb 004258b2 81000000 2041f3d4 ffffff01 0000000e 00000054 20420e58 0000006d 00000000 02fba6e6 10000000 004297ab a5a5a5a5 0042980b a5a5a5a5 00484171 a5a5a5a5 a5a5a5a5 20437688 00000000 00000000
      Error status: 0x00
      Step timer max interval 144
      MCU temperature: min 29.6, current 38.1, max 38.3
      Supply voltage: min 0.1, current 0.2, max 0.2, under voltage events: 0, over voltage events: 0, power good: no
      12V rail voltage: min 0.1, current 0.1, max 0.2, under voltage events: 0
      Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
      Events: 0 queued, 0 completed
      Driver 0: ok, SG min 0, mspos 0, reads 0, writes 0 timeouts 0
      Driver 1: ok, SG min 0, mspos 0, reads 0, writes 0 timeouts 0
      Driver 2: ok, SG min 0, mspos 0, reads 0, writes 0 timeouts 0
      Driver 3: ok, SG min 0, mspos 0, reads 0, writes 0 timeouts 0
      Driver 4: ok, SG min 0, mspos 0, reads 0, writes 0 timeouts 0
      Driver 5: ok, SG min 0, mspos 0, reads 0, writes 0 timeouts 0
      Date/time: 1970-01-01 00:00:00
      Slowest loop: 4.08ms; fastest: 0.05ms
      === Storage ===
      Free file entries: 10
      SD card 0 detected, interface speed: 25.0MBytes/sec
      SD card longest read time 3.0ms, write time 0.0ms, max retries 0
      === Move ===
      DMs created 125, segments created 0, maxWait 0ms, bed compensation in use: none, comp offset 0.000
      === MainDDARing ===
      Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
      === AuxDDARing ===
      Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
      === Heat ===
      Bed heaters 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
      === GCodes ===
      Segments left: 0
      Movement lock held by null
      HTTP is idle in state(s) 0
      Telnet is idle in state(s) 0
      File is idle in state(s) 0
      USB is ready with "M122" in state(s) 0
      Aux is idle in state(s) 0
      Trigger is idle in state(s) 0
      Queue is idle in state(s) 0
      LCD is idle in state(s) 0
      SBC is idle in state(s) 0
      Daemon is idle in state(s) 0
      Aux2 is idle in state(s) 0
      Autopause is idle in state(s) 0
      Code queue is empty
      === CAN ===
      Messages queued 10816, received 0, lost 0, boc 0
      Longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 50 (min 50), ts 6010/0/0
      Tx timeouts 0,0,6009,0,0,4805 last cancelled message type 4514 dest 127
      === Network ===
      Slowest loop: 0.17ms; fastest: 0.02ms
      Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions
      HTTP sessions: 0 of 8
      - Ethernet -
      State: active
      Error counts: 0 0 0 0 0
      Socket states: 2 2 2 2 2 0 0 0
      ok
      
      

      513d3ba1-1fb8-4a47-b84b-7be21f4c62e7-image.png

      Dennis_kimundefined 1 Reply Last reply Reply Quote 0
      • Dennis_kimundefined
        Dennis_kim @Dennis_kim
        last edited by

        @Dennis_kim

        • Ethernet is shown as an unidentified network and
          when checking for errors
          "Ethernet's ip configuration is incorrect"
          is indicated.
        T3P3Tonyundefined 1 Reply Last reply Reply Quote 0
        • T3P3Tonyundefined
          T3P3Tony administrators @Dennis_kim
          last edited by

          @Dennis_kim did you set an IP address on your computer as well? If you have a cable directly between the board and your computer then you will need to have a fixed IP address, in the same subnet, on your ethernet adaptor on the PC

          www.duet3d.com

          Dennis_kimundefined 1 Reply Last reply Reply Quote 0
          • Dennis_kimundefined
            Dennis_kim @T3P3Tony
            last edited by Dennis_kim

            @T3P3Tony

            How do I set the subnet prefix length?

            I tried setting it to 24 and it still doesn't work.

            53c97b8b-c45e-4ae1-a710-41d2ef82cab2-image.png
            11feeca2-2e4b-40d1-bb45-c097b4fb10cb-image.png

            1 Reply Last reply Reply Quote 0
            • Phaedruxundefined
              Phaedrux Moderator
              last edited by

              subnet would need to be added as 255.255.255.0

              Z-Bot CoreXY Build | Thingiverse Profile

              Dennis_kimundefined 1 Reply Last reply Reply Quote 0
              • Dennis_kimundefined
                Dennis_kim @Phaedrux
                last edited by Dennis_kim

                @Phaedrux
                already set 😭
                ip
                subnet mask
                gate way

                9a55e31a-19fa-4e39-8b5c-582d30dbb428-image.png

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by

                  Are you able to ping the Duet IP address from your PC?

                  Also see this guide on setting up a direct ethernet connection.

                  https://docs.duet3d.com/en/User_manual/Machine_configuration/Networking#wired-direct-connection

                  Z-Bot CoreXY Build | Thingiverse Profile

                  1 Reply Last reply Reply Quote 0
                  • First post
                    Last post
                  Unless otherwise noted, all forum content is licensed under CC-BY-SA