Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Spurious error when simulating a file....

    Scheduled Pinned Locked Moved
    Duet Web Control
    5
    10
    254
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Nightowlundefined
      Nightowl
      last edited by

      I'm not sure when it started to happen, but when I simulate a file for my CNC machine, I get an error (I'm not sure of the exact wording, but it essentially a "time out" message), particularly for a small gcode file. (The error is similar to the one I had when trying to run a file which was trying to move the spindle higher than the available Z height, but I can't find that post).

      However, the file runs perfectly well - although I had checked everything several times to make sure there was nothing wrong with the file or the machine.

      So, why am I getting this simulation error?

      I'll post the actual error tomorrow, but if anyone has any ideas...

      Thanks

      Few things are more dangerous than taking the advice of someone who thinks he knows what he's doing.
      I'm still on my learning curve, so take everything I say with caution!

      RatRig 1075, Duet3 MB6HC, Sorotec SFM 1000 PV-ER milling motor, Hobbyist

      Nightowlundefined 1 Reply Last reply Reply Quote 0
      • Nightowlundefined
        Nightowl @Nightowl
        last edited by

        OK, so here's a link to the video....

        link

        It shows me right-clicking the file and the error, but when I check the console, there is no indication of there being a problem.

        I hope the link works!

        Few things are more dangerous than taking the advice of someone who thinks he knows what he's doing.
        I'm still on my learning curve, so take everything I say with caution!

        RatRig 1075, Duet3 MB6HC, Sorotec SFM 1000 PV-ER milling motor, Hobbyist

        jay_s_ukundefined deckingmanundefined 2 Replies Last reply Reply Quote 0
        • jay_s_ukundefined
          jay_s_uk @Nightowl
          last edited by

          @Nightowl i don't see any errors there. all its telling you is the message is too big for the popup

          Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

          1 Reply Last reply Reply Quote 0
          • deckingmanundefined
            deckingman @Nightowl
            last edited by

            @Nightowl To elaborate on what @jay_s_uk has pointed out, the message is "Response too long - see console". Which means the response is too long to fit in a pop-up window so look in the console to read the full message. It isn't a "Spurious error".

            Ian
            https://somei3deas.wordpress.com/
            https://www.youtube.com/@deckingman

            1 Reply Last reply Reply Quote 0
            • Nightowlundefined
              Nightowl
              last edited by

              So, "Response too long, see Console" is not an error, just a message?

              Maybe the amount of time taken to simulate the file isn't long enough for the message to be generated? I've only noticed this started to happen recently, possibly since upgrading to v3.4.3

              I see 3.4.4 is out now, so I'll install it to see if that makes a difference, but as it's not an error, per se, it's not important.

              Has nobody else experienced this, though?

              Few things are more dangerous than taking the advice of someone who thinks he knows what he's doing.
              I'm still on my learning curve, so take everything I say with caution!

              RatRig 1075, Duet3 MB6HC, Sorotec SFM 1000 PV-ER milling motor, Hobbyist

              gloomyandyundefined 1 Reply Last reply Reply Quote 0
              • gloomyandyundefined
                gloomyandy @Nightowl
                last edited by

                @Nightowl So are you saying that there is no message in the console? That would be unusual. Perhaps post a picture of the console display after the simulation has completed....

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by

                  The pop up at the bottom is just telling you to look in the console for the full message, where you see the full simulated time being reported. There's no problem here.

                  Z-Bot CoreXY Build | Thingiverse Profile

                  Nightowlundefined 1 Reply Last reply Reply Quote 0
                  • Nightowlundefined
                    Nightowl @Phaedrux
                    last edited by

                    @Phaedrux said in Spurious error when simulating a file....:

                    The pop up at the bottom is just telling you to look in the console for the full message, where you see the full simulated time being reported. There's no problem here.

                    Good to know, thank you @Phaedrux

                    Few things are more dangerous than taking the advice of someone who thinks he knows what he's doing.
                    I'm still on my learning curve, so take everything I say with caution!

                    RatRig 1075, Duet3 MB6HC, Sorotec SFM 1000 PV-ER milling motor, Hobbyist

                    deckingmanundefined 1 Reply Last reply Reply Quote 0
                    • deckingmanundefined
                      deckingman @Nightowl
                      last edited by

                      @Nightowl I'm just surprised that you've never seen that before. But basically, if a response is too long to fit in a pop-up window, you'll get that message. It's better than having no pop-up at all and you'll likely come across it again, when there is a long response - not just when simulating a file.

                      Ian
                      https://somei3deas.wordpress.com/
                      https://www.youtube.com/@deckingman

                      Nightowlundefined 1 Reply Last reply Reply Quote 0
                      • Nightowlundefined
                        Nightowl @deckingman
                        last edited by

                        @deckingman I'm going to pay more attention, for sure, but I'm pretty sure I've seen longer messages in the pop-up without telling me to check the Console!

                        Few things are more dangerous than taking the advice of someone who thinks he knows what he's doing.
                        I'm still on my learning curve, so take everything I say with caution!

                        RatRig 1075, Duet3 MB6HC, Sorotec SFM 1000 PV-ER milling motor, Hobbyist

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA