Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    ExecOnMcode

    Scheduled Pinned Locked Moved
    Plugins for DWC and DSF
    11
    76
    5.1k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Falcounetundefined
      Falcounet @CrazyCreator
      last edited by Falcounet

      @CrazyCreator DSF configure it for you. Config files are stored into /etc/apparmor.d/.
      You should get /etc/apparmor.d/dsf.ExecOnMcode after the plugin installation.

      Make sure you also have installed duetpluginservice

      CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
      • CrazyCreatorundefined
        CrazyCreator
        last edited by CrazyCreator

        @Falcounet
        Bildschirm­foto 2022-11-30 um 23.32.18.png

        I don't have this file.

        But the install from the plugin is not complete, so i think the file is not created.

        http://www.crazycreatorcube.com

        1 Reply Last reply Reply Quote 0
        • CrazyCreatorundefined
          CrazyCreator @Falcounet
          last edited by CrazyCreator

          @Falcounet
          Bildschirm­foto 2022-11-30 um 23.48.02.png

          in screen you see the pluginservice is running
          apparmor freshly installed

          http://www.crazycreatorcube.com

          chrishammundefined 1 Reply Last reply Reply Quote 0
          • chrishammundefined
            chrishamm administrators @CrazyCreator
            last edited by chrishamm

            @CrazyCreator I don't think this is an AppArmor issue, it's more likely that the permissions in your DWC directory are off for some reason. Try reinstalling duetwebcontrol and if that doesn't help, run sudo chown -R dsf.dsf /opt/dsf to fix the ownerships again. If that doesn't help, try to delete the file as root (sudo rm /opt/dsf/sd/www/js/...) and install the plugin once more.

            Duet software engineer

            CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
            • CrazyCreatorundefined
              CrazyCreator @chrishamm
              last edited by CrazyCreator

              @chrishamm
              How can i reinstall or install DuetWebControl?
              I don't find any tutorial 😞

              /Update
              I upload this Zip-File: https://github.com/Duet3D/DuetWebControl/releases
              and hope this is what you mean, with reinstall DuetWebControl?
              i deleted all files with ExecOnMcode in name and try to reinstall the plugin

              ... But ... The same error 😞

              http://www.crazycreatorcube.com

              1 Reply Last reply Reply Quote 0
              • Phaedruxundefined
                Phaedrux Moderator
                last edited by

                Why not start with a DuetPi image?

                Z-Bot CoreXY Build | Thingiverse Profile

                CrazyCreatorundefined 1 Reply Last reply Reply Quote 1
                • CrazyCreatorundefined
                  CrazyCreator @Phaedrux
                  last edited by

                  @Phaedrux actual duetpi image missing python3.9, but TAMV need this.

                  http://www.crazycreatorcube.com

                  Phaedruxundefined Falcounetundefined 2 Replies Last reply Reply Quote 0
                  • Phaedruxundefined
                    Phaedrux Moderator @CrazyCreator
                    last edited by

                    @CrazyCreator said in ExecOnMcode v0.1:

                    missing python3.9

                    https://itheo.tech/install-python-39-on-raspberry-pi

                    Z-Bot CoreXY Build | Thingiverse Profile

                    CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                    • CrazyCreatorundefined
                      CrazyCreator @Phaedrux
                      last edited by

                      @Phaedrux
                      Maybe i try this, when @Falcounet & @chrishamm out of ideas 😄

                      http://www.crazycreatorcube.com

                      chrishammundefined 1 Reply Last reply Reply Quote 0
                      • chrishammundefined
                        chrishamm administrators @CrazyCreator
                        last edited by chrishamm

                        @CrazyCreator Did you try the chown command I posted above? If that doesn't resolve it, try to run sudo rm /opt/dsf/**/ExecOnMcode* and then reinstall the plugin. It's odd you're getting that "access denied" error.

                        PS: The stock DuetPi image comes with the python 3 package, run sudo apt install python if you're missing it.

                        Duet software engineer

                        CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                        • Falcounetundefined
                          Falcounet @CrazyCreator
                          last edited by

                          @CrazyCreator Can you give me a link to the system image you installed ?
                          I might give it a try on my pi.

                          1 Reply Last reply Reply Quote 0
                          • Falcounetundefined
                            Falcounet @CrazyCreator
                            last edited by

                            @CrazyCreator TAMV is like 3 years old. I don't think python 3.9 was out at this time.

                            1 Reply Last reply Reply Quote 0
                            • stuartofmtundefined
                              stuartofmt
                              last edited by

                              Jumping in here with a (possibly) relevant comment. If anyone intends to use Pi cameras: Consider using Debian Bullseye as the min base OS. There is a new library (from Pi) in Bullseye - so adopting this release will provide some future-proofing. It does not directly affect USB cameras but likely not a bad idea.

                              1 Reply Last reply Reply Quote 0
                              • CrazyCreatorundefined
                                CrazyCreator @chrishamm
                                last edited by CrazyCreator

                                @chrishamm said in ExecOnMcode v0.1:

                                @CrazyCreator Did you try the chown command I posted above? If that doesn't resolve it, try to run sudo rm /opt/dsf/**/ExecOnMcode* and then reinstall the plugin. It's odd you're getting that "access denied" error.

                                PS: The stock DuetPi image comes with the python 3 package, run sudo apt install python if you're missing it.

                                Yes ... try all your code-snippets ... now delete the directory and install the plugin again. but is the same error.

                                @Falcounet said in ExecOnMcode v0.1:

                                @CrazyCreator Can you give me a link to the system image you installed ?
                                I might give it a try on my pi.

                                is the official image which come with the raspianimagebuilder

                                @stuartofmt said in ExecOnMcode v0.1:

                                Jumping in here with a (possibly) relevant comment. If anyone intends to use Pi cameras: Consider using Debian Bullseye as the min base OS. There is a new library (from Pi) in Bullseye - so adopting this release will provide some future-proofing. It does not directly affect USB cameras but likely not a bad idea.

                                TAMV has a new version

                                Now i test the DuetPi Image with update to bullseye

                                http://www.crazycreatorcube.com

                                Falcounetundefined 1 Reply Last reply Reply Quote 0
                                • Falcounetundefined
                                  Falcounet @CrazyCreator
                                  last edited by Falcounet

                                  @CrazyCreator So, I downloaded the image and following the steps I describe below, I could install the plugin without any issue.

                                  1. Configure Wi-Fi and enable SSH in the advanced options of RaspberryPi Imager (Can be done by creating wpa_supplicant.conf and ssh files in boot partition)
                                  2. Run sudo raspi-config and go to "Interface options", "SPI" to enable the SPI interface
                                  3. Add Duet APT sources + GPG key : sudo wget -q https://pkg.duet3d.com/duet3d.gpg -O /etc/apt/trusted.gpg.d/duet3d.gpg && sudo wget -q https://pkg.duet3d.com/duet3d.list -O /etc/apt/sources.list.d/duet3d.list && sudo apt update
                                  4. Install Duet packages + Apparmor: sudo apt install apparmor duetsoftwareframework duetpluginservice duetpimanagementplugin
                                  5. Enable services : sudo systemctl enable duetcontrolserver duetwebserver duetpluginservice duetpluginservice-root
                                  6. Reboot : sudo reboot
                                  7. Install ExecOnMcode from DWC external plugins tab
                                  CrazyCreatorundefined 1 Reply Last reply Reply Quote 1
                                  • CrazyCreatorundefined
                                    CrazyCreator @Falcounet
                                    last edited by

                                    @Falcounet
                                    Which version did you load, 32bit or 64bit?

                                    http://www.crazycreatorcube.com

                                    Falcounetundefined 1 Reply Last reply Reply Quote 0
                                    • Falcounetundefined
                                      Falcounet @CrazyCreator
                                      last edited by

                                      @CrazyCreator 32bits comes to default so I took that one

                                      CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                                      • CrazyCreatorundefined
                                        CrazyCreator @Falcounet
                                        last edited by

                                        @Falcounet
                                        what you think, should i try 64bit? make it a difference for the plugin? i think not?

                                        http://www.crazycreatorcube.com

                                        Falcounetundefined 1 Reply Last reply Reply Quote 0
                                        • Falcounetundefined
                                          Falcounet @CrazyCreator
                                          last edited by

                                          @CrazyCreator I believe it will work the same but it is up to you. For the plugin itself, it won't make a difference.

                                          CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                                          • CrazyCreatorundefined
                                            CrazyCreator @Falcounet
                                            last edited by

                                            @Falcounet
                                            After your step 3 i have to make

                                            sudo apt upgrade?

                                            http://www.crazycreatorcube.com

                                            Falcounetundefined 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA