Resume APF not working

R006

hey,

I am using Duet2 wifi with RRF 3.4.0beta3.

Resume APF not working when I am printing with Panel SD card.
but the print file information are stored in resurrect and when i pressed resume APF is give the error: "could not print because file not found".

So any suggestions on this?
@dc42 @Phaedrux

jay_s_uk

@R006 update to the latest stable and try again

R006

@jay_s_uk
okay, but cannot use latest version for some reason.

jay_s_uk

@R006 not sure how you expect support for a firmware from over 2 years ago then

R006

@jay_s_uk
okay so please suggest me which version of RRF can i use?

jay_s_uk

@R006 3.4.6, the latest stable https://github.com/Duet3D/RepRapFirmware/releases/tag/3.4.6

R006

@jay_s_uk hello
i have tried RRF 3.4.6 but in this it's not working. give same error.

so any suggestions on this @jay_s_uk @dc42 @Phaedrux

jay_s_uk

@R006 have you followed this to set it up? https://docs.duet3d.com/en/User_manual/Tuning/Resume
what does you M911 command look like?

R006

@jay_s_uk
Yes I have already done it.
But when we print from the on board SD card it works perfectly.

M911 S21 R22.5 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000"

jay_s_uk

@R006 do you get a ressurect.g written after the power loss?

R006

@jay_s_uk
yes

jay_s_uk

@R006 post the contents

jay_s_uk

and how are you trying to resume the print?

R006

@jay_s_uk
after power on, i have run resume APF.g (M916) then it's run resurrect.g itself and after that ,run resurrect-prologue.g file

R006

@jay_s_uk resurrect.g

R006

@jay_s_uk
i am waiting for your reply

Phaedrux

What firmware is on the PanelDue?

R006

@Phaedrux PanelDue firmware is 3.4.1

Phaedrux

It's possible this is a bug. I don't think it's been tested for previously so it may be a missing feature.

R006

@Phaedrux so which firmware i have to use?