Resume APF not working

[R006]

@jay_s_uk
Yes I have already done it.
But when we print from the on board SD card it works perfectly.

M911 S21 R22.5 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000"

[jay_s_uk]

@R006 do you get a ressurect.g written after the power loss?

[R006]

@jay_s_uk
yes

[jay_s_uk]

@R006 post the contents

[jay_s_uk]

and how are you trying to resume the print?

[R006]

@jay_s_uk
after power on, i have run resume APF.g (M916) then it's run resurrect.g itself and after that ,run resurrect-prologue.g file

[R006]

@jay_s_uk resurrect.g

[R006]

@jay_s_uk
i am waiting for your reply

[Phaedrux]

What firmware is on the PanelDue?

[R006]

@Phaedrux PanelDue firmware is 3.4.1

[Phaedrux]

It's possible this is a bug. I don't think it's been tested for previously so it may be a missing feature.

[R006]

@Phaedrux so which firmware i have to use?

[Phaedrux]

Ideally the latest stable, but what I'm saying about power resume from the secondary panel due SD card is that the feature isn't supported in any firmware at the moment.

[R006]

@Phaedrux So when we get updated firmware its causing problems at customer end.

[Phaedrux]

@R006 said in Resume APF not working:

@Phaedrux So when we get updated firmware its causing problems at customer end.

Can you be more specific?

[R006]

@Phaedrux
In what context?
Sometimes they use PanelDue SD card for printing

[Phaedrux]

I don't have a time frame on that, sorry. Thank you for bringing it to our attention though. Secondary SD card printing is fairly uncommon.

[R006]

@Phaedrux okay,
Any suggestions on how I can update this from my end?

[Phaedrux]

Update what?

[R006]

@Phaedrux
If I want to fix this problem which firmware should be update panel or mainboard?