mainboard 6d not answering

[dc42]

@zecreton have you run M552 without parameters from the serial terminal, to check that Ethernet is connected and configured at that IP address (192.168.1.14) ? The response should be:

Ethernet is enabled, configured IP address: 192.168.1.14, actual IP address: 192.168.1.14

[zecreton]

@dc42 the mainboard doesn't answer to that command

[Phaedrux]

@zecreton said in mainboard 6d not answering:

192.168.1.14

How did you determine that was the IP address of the Duet?

[zecreton]

@Phaedrux my usb-c bugged, i unplugged and plugged again and now it works

[zecreton]

@Phaedrux Ethernet is enabled, configured IP address: 192.168.1.14, actual IP address: 192.168.1.14

[Phaedrux]

Is your computer on the same subnet as the Duet? 192.168.1

[zecreton]

@Phaedrux where do i see that?

[Phaedrux]

I don't have any information about your computer/os setup, but you should be able to find directions from a quick google to determine your internal IP address.

[zecreton]

@Phaedrux it is not the same

[zecreton]

@Phaedrux how do i change it?

[Phaedrux]

The computer must be connected to the same network as the Duet to be able to communicate with it.

[zecreton]

@Phaedrux i don't understand, i only have one network

[Phaedrux]

What is the IP address of your computer?

[zecreton]

@Phaedrux it is 10.0.0.14 i think

[Phaedrux]

If that is your internal IP address then your Duet isn't on the same network.

[zecreton]

@Phaedrux if i connect my pc and the mainboard with an ethernet wire it should be the same right?

[Phaedrux]

Yes, you can follow the directions here

https://docs.duet3d.com/en/User_manual/Machine_configuration/Networking#wired-direct-connection

[zecreton]

@Phaedrux it says permission denied when i try to connect to the mainboard by CuteCom

[zecreton]

@Phaedrux i got it, thank you for all the help