A curious printhead for the E3D Motion System
-
-
@jay_s_uk said in A curious printhead for the E3D Motion System:
@fcwilt https://teamgloomy.github.io/fly_sht36_max_v3_general.html
This unit?
Why the non-rectangular shape? Is it designed to fit something in particular?
Thanks.
Frederick
-
@fcwilt thats the one.
Fits on the back of a nema 14. Most extruder designs use these now -
@jay_s_uk said in A curious printhead for the E3D Motion System:
@fcwilt thats the one.
Fits on the back of a nema 14. Most extruder designs use these nowIs the sensing coil included or is that a separate item?
Thanks.
Frederick
-
@fcwilt included
-
-
@fcwilt Or you could use the Duet Roto Toolboard, that also has the SZP built in. https://www.duet3d.com/Duet3RotoToolboard
-
@gloomyandy said in A curious printhead for the E3D Motion System:
@fcwilt Or you could use the Duet Roto Toolboard, that also has the SZP built in. https://www.duet3d.com/Duet3RotoToolboard
That is new to me.
And the BEST part - I get to buy new tools and spare parts for the connectors I've never seen before!
Thanks for the info. I will check it out.
Frederick
-
I downloaded the step file for the tool board you mentioned but it has some funny bits.
What are all those little white dots?
Perhaps the file needs some work?
Frederick
-
@fcwilt I've no idea, perhaps one of the Duet folks knows? @droftarts ?
