PanelDue7i
-
This looks great, ordered one for my Kossel XL+
Please let me know when/if you have a 3D printed case STL for it.
-
Will there be a other sizes offered in this configuration?
-
Will there be a other sizes offered in this configuration?
Not in the near future. If our experience with the 7" version is good, we may eventually commission a 5" version.
-
For us, is it better to buy from you or filastruder?
-
For us, is it better to buy from you or filastruder?
If you are US based then Filastruder, If UK then Duet3d.com otherwise check the shipping and exchange rates.
-
Where would I find a mechanical drawing, and/or a .brd file, for the new PanelDue 7i?
I have one, wanting to print a case/mount for it. I can measure it… but I'd rather work from a drawing.
-
Hello,
Where can I find the physical dimensions and or drawings. I would like to design a case for it unless you have one already designed./quadcells
-
Drawings added to the Filastruder site:
-
Drawings added to the Filastruder site:
Thank you!
-
I need dimensions to get the 7" LCD into solidworks, maybe someone already did the 3D…?
-
Has anyone built a case for this yet?
If so, care to share? I'm a complete novice at 3d object design; wouldn't know where to start..
-
Scratch that last request - just found this…
https://www.thingiverse.com/thing:2818424 -
There's a few PanelDue 7i cases out there. I myself am partial to this one (https://www.thingiverse.com/thing:2799628), but that's because I designed it heehee. It's not as thin as it could be though, so if that's what you're looking for the one you linked is probably a better fit for you.
-
There's a few PanelDue 7i cases out there. I myself am partial to this one (https://www.thingiverse.com/thing:2799628), but that's because I designed it heehee. It's not as thin as it could be though, so if that's what you're looking for the one you linked is probably a better fit for you.
Wish I'd seen this one first - looks great and I like the fact you have the mounting bracket included and button for the reset button. Hmmm, decision to make… throw away the already printed one and print this or stick with what I have...
