We will be patiently waiting for your fork with all of the fixes, Sunshine
Best posts made by pogo1213
-
RE: Dave's so proud
-
Start Gcode for the Piezo Orion
Hey,
Just want some input, how have you adjusted you start gcode for the probe. What temps are your probing at and how have you adjusted your start gcode to accommodateThanks
-
RE: 2 fans showing, only one should
Setting>User Interface
There is a fan setting letting you choose which you would like visible. Select which you would like then select "Apply Setting".
Latest posts made by pogo1213
-
Does anyone use the PS_on port on the Duet 3
I have been looking into controlling when one of my power supplies is on since it has a fan that is away on and can get annoying.
This is the power supply I want to power down and I also have a 5v power supply just for the raspberry that is fanless and can stay on.
https://www.meanwell.com/productPdf.aspx?i=469At this point, I'm just looking for some insight into how someone is using it so I don't screw something up.
Cheers,
-
RE: Nozzle crashes before print starts.
Nope that looks good. Can you post your full config?
-
RE: Dave's so proud
Not sure if you are aware but there are thousands of different printer setups that have to designed around. You can't expect everything to be plug and play, if that is what you want buy a prebuilt unit and never modify it. Spamming is not the answer, best of luck.
-
RE: Nozzle crashes before print starts.
Do you have a config override file?
If you do check to see if it has any bed offsets saved there. If it does comment them out an see if it solves the issue and let me know.
-
RE: Dave's so proud
We will be patiently waiting for your fork with all of the fixes, Sunshine
-
RE: Duet 2 Maestro + Quadfusion Dev Here: Halp?
when the endstop triggered, how did the machine react? continue as if it wasnt triggered or did something else happen. Also was this happening when you home all the the axis interdependently? or did you hit home all? The configurator tends to royally screw up the Homeall.g file
-
RE: Duet 2 Maestro + Quadfusion Dev Here: Halp?
To correct the direction its a simple fix, Im guessing your Z drive is P2 like the duet. In that case change the
M569 P2 S1To
M569 P2 S0What kind of endstop are you using?
-
RE: Duet 2 Maestro + Quadfusion Dev Here: Halp?
Can you post your Config.g?
-
RE: 2 fans showing, only one should
Setting>User Interface
There is a fan setting letting you choose which you would like visible. Select which you would like then select "Apply Setting".
-
RE: Blobs and under extrusion with S3D
After playing with retraction and pressure advance everything looks good when its not moving between parts. When it is it comes out like this
https://drive.google.com/file/d/13OBB-CuOU5PKmGub2PCu8fpjo6xvNbqS/view?usp=sharingAny suggestions?